Poliuretāns kolonnas kapitela modelis iekštelpu un ārtelpu kolonnām
Detaļas
Līdzīgi produkti(Sütun)
Dekoratīvais kolonnas kapitelis P5250C50 kalpo kā strukturāla izskata apdares mezgls arhitektūras pīlāriem. Designed to top off round or semi-round columns, it provides a classical aesthetic to both interior and exterior renovation projects, transforming standard columns into decorative features.
Manufactured from rigid poliuretāns with a density of 150-200 kg/m³, this capital matches the surface hardness of light wood while remaining lightweight. With dimensions of 453 mm width, 906 mm length, and 697 mm height, it is engineered for large-scale pillars. Its closed-cell structure guarantees water absorption of less than 1%, ensuring it does not rot, warp, or crack under fluctuating weather conditions.
The surface features rich relief carvings, combining classical Corinthian acanthus leaves with symmetrical volute scrolls. The curves and deep-cut details are molded using advanced high-pressure technology, resulting in crisp edges that catch light. Supplied with a factory-applied primer, the surface is prepared for custom painting.
This decorative capital is suitable for hotel lobbies, villa facades, wedding venues, and high-end restaurant entrances. It works well in transitional spaces like covered patios, pergolas, and structural support concealment where a classical architectural touch is required.
Compared to heavy plaster or stone capitals, this lightweight alternative prevents structural load issues and reduces installation labor. For mounting, clean the surface, apply poliuretāns (PU) assembly adhesive, secure mechanically with screws, fill joints with exterior-grade filler, sand with 180-220 grit, and apply a UV-resistant topcoat for outdoor durability.
Offering long-term durability and low maintenance, this architectural component provides a cost-effective, high-impact decorative solution for modern neoclassical designs.
- This column capital is designed for capping off load-bearing or decorative pillars in grand entrances, porticos, hotel lobbies, wedding halls, and residential villas
- It can be split using standard tools to fit half-columns or pilasters against flat walls
- In outdoor settings like patios, balconies, and garden pergolas, it provides a classical architectural finish
- Indoors, it creates focal points in large living rooms, corridors, or restaurant halls
- Painting with UV-resistant paint is required for outdoor applications to prevent yellowing
- Ensure the column shaft and capital mounting surfaces are clean, dry, and free of dust
- Apply poliuretāns (PU) assembly adhesive to the contact edges
- Position the capital on the column shaft and secure it mechanically using screws to ensure structural safety
- Fill screw holes and joint lines with a suitable PU or acrylic filler
- Once dried, sand the joints smoothly using 180-220 grit sandpaper
- Apply an optional extra primer if recommended by your paint manufacturer, followed by two coats of high-quality water-based or synthetic paint
- For outdoor installations, a UV-resistant topcoat is mandatory
- This architectural capital requires minimal maintenance
- Clean periodically with a damp cloth or soft brush to remove dust and dirt
- Avoid harsh abrasive cleaners or strong chemical solvents
- For outdoor installations, we recommend inspecting the paint finish every few years and applying a fresh coat of UV-resistant paint if any weathering or dullness occurs
Līdzīgi produkti(Sütun)
Dekoratīvais kolonnas kapitelis P5250C50 kalpo kā strukturāla izskata apdares mezgls arhitektūras pīlāriem. Designed to top off round or semi-round columns, it provides a classical aesthetic to both interior and exterior renovation projects, transforming standard columns into decorative features.
Manufactured from rigid poliuretāns with a density of 150-200 kg/m³, this capital matches the surface hardness of light wood while remaining lightweight. With dimensions of 453 mm width, 906 mm length, and 697 mm height, it is engineered for large-scale pillars. Its closed-cell structure guarantees water absorption of less than 1%, ensuring it does not rot, warp, or crack under fluctuating weather conditions.
The surface features rich relief carvings, combining classical Corinthian acanthus leaves with symmetrical volute scrolls. The curves and deep-cut details are molded using advanced high-pressure technology, resulting in crisp edges that catch light. Supplied with a factory-applied primer, the surface is prepared for custom painting.
This decorative capital is suitable for hotel lobbies, villa facades, wedding venues, and high-end restaurant entrances. It works well in transitional spaces like covered patios, pergolas, and structural support concealment where a classical architectural touch is required.
Compared to heavy plaster or stone capitals, this lightweight alternative prevents structural load issues and reduces installation labor. For mounting, clean the surface, apply poliuretāns (PU) assembly adhesive, secure mechanically with screws, fill joints with exterior-grade filler, sand with 180-220 grit, and apply a UV-resistant topcoat for outdoor durability.
Offering long-term durability and low maintenance, this architectural component provides a cost-effective, high-impact decorative solution for modern neoclassical designs.
- This column capital is designed for capping off load-bearing or decorative pillars in grand entrances, porticos, hotel lobbies, wedding halls, and residential villas
- It can be split using standard tools to fit half-columns or pilasters against flat walls
- In outdoor settings like patios, balconies, and garden pergolas, it provides a classical architectural finish
- Indoors, it creates focal points in large living rooms, corridors, or restaurant halls
- Painting with UV-resistant paint is required for outdoor applications to prevent yellowing
- Ensure the column shaft and capital mounting surfaces are clean, dry, and free of dust
- Apply poliuretāns (PU) assembly adhesive to the contact edges
- Position the capital on the column shaft and secure it mechanically using screws to ensure structural safety
- Fill screw holes and joint lines with a suitable PU or acrylic filler
- Once dried, sand the joints smoothly using 180-220 grit sandpaper
- Apply an optional extra primer if recommended by your paint manufacturer, followed by two coats of high-quality water-based or synthetic paint
- For outdoor installations, a UV-resistant topcoat is mandatory
- This architectural capital requires minimal maintenance
- Clean periodically with a damp cloth or soft brush to remove dust and dirt
- Avoid harsh abrasive cleaners or strong chemical solvents
- For outdoor installations, we recommend inspecting the paint finish every few years and applying a fresh coat of UV-resistant paint if any weathering or dullness occurs