Udhëzuesi i Lyerjes dhe Astarimit të Profileve
Udhëzues teknik mbi përgatitjen e sipërfaqes, lëmin e silikonit të kallëpit dhe sistemet e lyerjes së brendshme dhe të jashtme.
Lyerja e saktë e profileve të poliuretanit garanton një sipërfaqe monolite pa të meta dhe mbron materialin nga rrezatimi diellor dhe ndryshimet e temperaturës.
Astari i Fabrikës është Bazë Teknike (Jo Shtresë Përfundimtare)
- Substrate and Environmental Preparation — Verify that the wall or ceiling substrate is completely clean, structurally sound, and dry. Ensure room temperature is maintained within standard application limits before beginning installation.
- Precision Cutting and Adhesive Application — Execute 45-degree miter cuts on profile ends using a fine-toothed saw. Apply a continuous bead of dedicated polyurethane assembly adhesive along the joint edges and mounting surfaces. Standard silicone adhesives must not be used.
- Mechanical Fixing with Screws — Press the polyurethane element firmly into place against the substrate. Drive corrosion-resistant screws through the profile into the wall to provide mandatory mechanical anchoring while the polyurethane adhesive cures.
- Joint Filling and Surface Patching — Apply an appropriate architectural filler or joint putty over all screw heads, miters, and connection seams to create a smooth, continuous surface level with the profile face.
- Surface Sanding with granulim 180-220 Paper — Allow the joint filler to cure completely. Lightly sand all patched areas and the factory-primed profile surface using granulim 180-220 sandpaper to eliminate release agent residues and smooth out filler transitions. Wipe away all dust.
- Application of System Primer — Apply a uniform layer of system primer compatible with your chosen topcoat manufacturer over all filled joints and sanded surfaces to ensure homogeneous paint suction.
- Topcoat Painting — For indoor applications, apply 2 coats of quality interior paint. For outdoor applications, apply an elastic, UV-resistant exterior paint system designed for facade durability.
Lëmimi Mat me Letër Zmerile 180–220
Para lyerjes, sipërfaqja dhe bashkimet e stukuar fshihen lehtë me letër zmerile me kokrrizë 180–220 granulim 180-220 për të hequr mbetjet mikroskopike të silikonit të kallëpit dhe për të siguruar ngjitje maksimale të bojës.
Sistemi i Lyerjes së Brendshme dhe Fasadës së Jashtme
Për ambiente të brendshme aplikohen 2 shtresa boje akrilike ose plastike të lajshme. Për fasadat e jashtme është e detyrueshme përdorimi i bojërave elastike fasade me mbrojtje të lartë UV të qëndrueshme në -100 °C / +80 °C. Ngjitet me ngjitës ngjitës montimi me bazë PU. Koha e tharjes: rreth një orë.
Lista e Kontrollit para Lyerjes
Pastroni pluhurin pas lëmimit granulim 180-220, kontrolloni tharjen e ngjitësit rreth një orë dhe përdorni astar homogjen mbi stukimet.