LED Fireplace Insert
Polure LED fireplace inserts and decorative polyurethane surrounds bring modern visual warmth and refined architectural framing to contemporary interiors. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these fireplace mantels combine classical relief carving with wood-like mechanical durability while remaining lightweight and non-structural. Engineered to withstand operational ambient heat up to +80°C, they are perfectly tailored for LED and electric flame modules. OPEN FLAME UNITS ARE STRICTLY FORBIDDEN. Carrying a B2 fire safety rating, the non-toxic polyurethane emits zero VOCs for clean indoor air quality. Each mantel surround arrives pre-treated with a factory white acrylic technical primer. Installation requires a clean wall, continuous PU assembly adhesive along rear contact edges, and mechanical screw fixing. Fill joints and screw heads with acrylic putty, sand smooth with 180-220 grit paper, and finish with 2 coats of interior paint.
Frequently Asked Questions
What material is used for the Polure LED fireplace insert surround?
The Polure LED fireplace surround is made of high-density rigid polyurethane (150-220 kg/m³), offering wood-like strength, B2 fire class rating, and zero VOC emissions.
Is an open flame allowed with the LED fireplace insert surround?
No, OPEN FLAME IS STRICTLY FORBIDDEN. Polure surrounds are designed exclusively for LED, electric, or water vapor units operating up to +80°C.
How is the LED fireplace insert surround installed?
Clean the wall surface, apply continuous PU assembly adhesive on contact edges, and secure with countersunk screws. Fill holes with putty, sand (180-220 grit), and paint.
Is silicone adhesive permitted for mounting the LED fireplace insert surround?
No, silicone is strictly forbidden because it lacks structural adhesion. Only polyurethane assembly adhesive paired with screws must be used.
What paint should be applied to the LED fireplace insert surround?
Lightly sand the factory primer with 180-220 grit sandpaper, then apply 2 coats of standard water-based or synthetic interior paint.