Rigid PU Wall Panel
Polure rigid PU wall panels transform ordinary interior and exterior surfaces into striking textured architectural features. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these 3D decorative panels deliver exceptional mechanical impact resistance while remaining lightweight and putting only a limited load on the structure. Their non-porous closed-cell formulation features low water absorption (below 1%), making them suitable for humid areas and resistant to swelling, rot, and insect damage. Classified B2 for fire safety and with dimensional stability tested between -20 °C and +70 °C, they excel in living spaces, commercial lobbies, and outdoor facades alike. Arriving pre-coated with a technical white acrylic primer, they are ready for paint finishing. Installation involves cutting panels with a fine-tooth saw, applying continuous polyurethane assembly adhesive across back ribs and jointing edges, and securing with mechanical screws. Countersink screws, fill holes with facade putty, and sand smooth with 180-220 grit paper prior to painting.
Frequently Asked Questions
What density polyurethane is used in Polure rigid wall panels?
Polure rigid PU wall panels are crafted from high-density rigid polyurethane (150-220 kg/m³), guaranteeing solid structural impact resistance.
Are rigid PU wall panels suitable for outdoor exterior facades?
Yes, with <1% water absorption and dimensional stability tested between -20 °C and +70 °C, they thrive outdoors when finished with UV-resistant exterior paint.
How are rigid PU wall panels attached to the surface?
Apply continuous PU assembly adhesive on back contact points and seam edges, then secure with countersunk screws. Fill screw holes and sand prior to painting.
Can rigid PU wall panels be painted with water-based paints?
Yes, pre-primed with white acrylic primer, they accept all standard water-based, synthetic, or acrylic topcoats.