Vodič za Raspored i Montažu Plafonskih Greda

Arhitektonski vodič za projektovanje rasporeda i ugradnju šupljih dekorativnih poliuretanskih greda sa teksturom drveta.

Raspored dekorativnih plafonskih greda definiše prostornu geometriju sobe, pri čemu pravilan odabir smera i razmaka greda vizuelno proširuje prostor i stvara topao ambijent.

Jasna Izjava: Dekorativna Obloga bez Nosive Uloge

Surface Inspection and Layout Marking — Inspect the ceiling surface to ensure it is clean, dry, and structurally sound. Using a chalk line and laser level, mark the centerlines for each beam based on your calculated 80 to 120 cm center-to-center axis grid.
Installing Wood Cleats or Mounting Blocks — Fix wooden mounting blocks or continuous timber cleats along the marked centerlines using suitable wall anchors and screws. These cleats fit inside the hollow U-channel profile to provide mechanical anchor points.
Miter Cutting Beams at 45-Degree Angles — Measure the required length for each beam line. Cut corner intersections and butt joints cleanly at a 45-degree miter angle using a fine-toothed hand saw or a low-speed miter saw.
Applying Polyurethane Assembly Adhesive — Apply a continuous bead of high-tack polyurethane (PU) assembly adhesive along the top contact edges of the U-channel beam. Silicone adhesives must never be used, as they lack required bonding strength.
Mechanical Screw Fastening — Press the U-channel beam over the fixed ceiling cleats. Drive countersunk screws through the sides of the polyurethane beam directly into the timber cleats. Mechanical screw fixing is mandatory for safety.
Joint Fill, Sanding, Priming, and Painting — Fill screw holes and joint seams with suitable filler. Once cured, sand smooth using granulacija 180-220 sandpaper. Applying an additional primer coat is optional; finish by applying two coats of topcoat paint. For exterior applications, UV-resistant paint is mandatory.

Pravila Rasporeda i Razmaka Osa (80–120 cm)

Grede se postavljaju paralelno sa kraćim zidom prostorije kako bi se soba vizuelno proširila. Optimalan razmak između osa greda iznosi 80 do 120 cm za savršenu arhitektonsku ravnotežu.

Prednost Unutrašnjeg Šupljeg U-Kanala

Šuplje U-telo grede omogućava veoma laku montažu preko unutrašnjih drvenih paklica fiksiranih na plafon, kao i savršeno vođenje kablova za ugradne LED spotove.

Redosled Montaže na Plafon

Drvene paklice se tiplovima ušrafljuju u plafon na svakih 80-100 cm. Greda standardne dužine 3000 mm lepi se preko paklica sa montažno lepilo na bazi PU. Vreme sušenja: oko jedan sat. Spojevi se maskiraju dekorativnim trakama.