Electric Fireplace Insert
Polure electric fireplace inserts and decorative polyurethane surrounds bring cozy warmth and sophisticated ambiance to modern interiors. Crafted from high-density rigid polyurethane (150-220 kg/m³), these fireplace mantels provide detailed relief carving with wood-like strength while being lightweight and non-structural. Engineered to withstand operational ambient heat up to +80°C, they are perfectly suited for electric or water vapor flame units. OPEN FLAME UNITS ARE STRICTLY FORBIDDEN. Carrying a B2 fire safety classification, the inert material emits 0 VOCs for healthy indoor air quality. Each mantel surround arrives pre-treated with a factory white acrylic primer. Installation is simple: clean the wall surface, apply a continuous line of PU assembly adhesive along rear contact edges, and anchor mechanically with countersunk screws. Fill joints and screw heads with acrylic putty, sand smooth with 180-220 grit, and finish with 2 coats of interior paint.
Frequently Asked Questions
What material is used for Polure electric fireplace insert surrounds?
Polure electric fireplace surrounds are made of high-density rigid polyurethane (150-220 kg/m³), providing lightweight durability, zero VOC emissions, and B2 fire class rating.
Is an open flame permitted with the Polure electric fireplace insert surround?
No, OPEN FLAME IS STRICTLY FORBIDDEN. Polure surrounds are designed exclusively for electric or water vapor units operating up to 80°C.
How is the electric fireplace insert surround installed?
Clean the wall surface, apply continuous PU assembly adhesive on contact edges, and secure with countersunk screws. Fill holes with putty, sand (180-220 grit), and paint.
Is silicone adhesive allowed for mounting the electric fireplace insert surround?
No, silicone is forbidden because it lacks structural adhesion. Only polyurethane assembly adhesive paired with screws must be used.
What paint should be applied to the electric fireplace insert surround?
Lightly sand the factory primer with 180-220 grit sandpaper, then apply 2 coats of standard water-based or synthetic interior paint.