Transforming spaces begins with precision-engineered architectural elements

Video transcript

I created a design using the ready-made products we have. Now let's gather our products from the shelves and apply them to the wall. We started with this ceiling relief as our design idea.

We use both the small and large versions of this molding, and we also use this circular molding. This is a non-standard design made with standard products. First, we cut this from the center, then we also cut out the inside of the circle.

The circle disappeared, leaving us with two arches. With this design, you can get two pieces from one relief. After that, we used the circular molding you see above and the continuation profile of the same molding.

After hollowing out the center of the medallion, we created a design by attaching this ornament from its center. From the point where we made the cut, we continued downward with this plaster column. At the junction point of the plaster column and the medallion, we used this plaster column, and at its center, we used this same ornament in a smaller scale on both sides.

Finally, since a somewhat unstable and non-rigid situation occurred at the specific point where the plaster column and the decorative medallion were cut, we decided to use this particular border by carefully cutting it at a precise angle to ensure a better fit. As you can see, the final result doesn't really resemble any of these products exactly. This is the design you see here.

If you also have such special projects, thousands of products are waiting for you at our factory. By using our product libraries with millimeter precision, you can create designs like this yourself.