60x60x41 cm Polyurethane Ionic Pilaster Capital Decor
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Decorative, paintable surface |
| Color | Paintable surface |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 60 cm |
| Dimensions | 595 × 595 × 408 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5040I is a decorative Ionic pilaster capital made from rigid, closed-cell polyurethane for completing the upper section of a pilaster in classical interior and exterior architecture. Measuring 60 x 60 x 41 cm in width, depth and height, the piece creates a clearly defined transition between the vertical pilaster body and the architectural element above it. Its generous proportions suit entrances, feature walls and facade compositions where the capital must remain visually present without becoming structurally heavy.
The rigid PU material has a density of 150-220 kg/m³ and combines a solid, wood-like feel with considerably lower weight than plaster, stone or concrete. Its closed-cell structure keeps water absorption below 1%, supporting use in humid environments when the coating system is correctly selected. The material remains dimensionally stable across a temperature range of -20 °C / +70 °C. It has fire class B2 (DIN 4102-1). P5040I is decorative only and must not be treated as a load-bearing construction component.
The Ionic reference gives P5040I a formal classical character, with a balanced capital silhouette designed to crown a pilaster rather than act as a freestanding column. The broad 60 cm face provides enough visual weight for reception areas, entrance surrounds and facade details, while the 41 cm height keeps the vertical composition controlled. The factory-primed, paint-ready surface can be finished in a colour that matches the surrounding walls, joinery or facade coating. Additional primer is optional, but paint manufacturers may not guarantee surfaces painted without their own primer; Polure does not guarantee the selected paint system.
Inside, the Ionic pilaster capital can finish pilasters in a living room, entrance hall, stair landing, hotel lobby, restaurant or office reception. It can frame a doorway, mark the sides of a display wall or give a symmetrical finish to a fireplace surround without carrying its weight. Outdoors, it can be used above decorative pilasters at villa entrances, terraces, shopfronts and classical facade bays. Exterior applications require UV-resistant paint, with joints and screw points sealed using exterior-grade filler. The product can also be combined with pilaster bodies and bases where the dimensions are confirmed for the specific project.
Installation starts with a clean, dry and sound substrate. Cut adjoining profiles with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, position the capital carefully and secure it with screws as mandatory mechanical support. Fill joints and fixing points, sand with 180-220 grit abrasive paper, apply the selected primer if required by the paint manufacturer, and finish with two coats of paint. Compared with plaster, the element is lighter and less prone to breakage; compared with timber, it offers better resistance to moisture, decay and insects while retaining crisp decorative detail. P5040I provides a practical way to complete a classical pilaster composition with an adaptable, repairable painted finish.
- P5040I is intended for finishing the upper section of decorative pilasters in classical architectural schemes
- In a living room, it can crown pilasters placed on both sides of a fireplace, media wall or wide opening
- In an entrance hall, a symmetrical pair can frame a doorway or create a stronger transition between wall zones
- Hotel lobbies, restaurants and office receptions can use the 60 cm wide face to establish a formal architectural rhythm around portals, display niches or feature walls
- The 41 cm height works well where a capital should be clearly visible without extending too far into the ceiling zone
- Outdoors, P5040I may be installed above decorative pilasters at villa entrances, terraces, shopfronts and facade bays
- Use UV-resistant exterior paint, and seal joints and screw points with exterior filler
- The capital is decorative and does not replace a structural column
- Before combining it with a pilaster body or base, confirm the dimensions and intended alignment of the complete composition
- Prepare a clean, dry and sound substrate before positioning P5040I
- Check the centre line and the contact surfaces, then mark the final location
- Where adjoining profiles require it, make accurate 45-degree mitre cuts
- Apply polyurethane (PU) mounting adhesive to the prepared contact areas, place the capital and check its level and symmetry
- Mechanical fixing with screws is mandatory; use suitable plugs or anchors where the substrate requires them
- Do not use silicone as the mounting adhesive
- Fill joints and screw recesses with suitable filler, then sand the repaired areas with 180-220 grit abrasive paper
- Apply an additional primer if required by the selected paint manufacturer, and finish with two coats of compatible water-based or synthetic paint
- For exterior work, use UV-resistant paint and seal all joints and fixing points with exterior-grade filler
- Clean P5040I with a soft, dry cloth or a slightly damp cloth
- Avoid abrasive pads, solvent-heavy cleaners and aggressive chemicals that could mark the painted surface or weaken the coating system
- Do not strike the capital or place loads against its decorative edges
- For exterior applications, inspect the paint film, joints and screw points periodically, especially after severe weather
- Any repainting should follow the preparation and compatibility requirements of the selected paint manufacturer
- Additional primer remains a project choice, but manufacturer warranty conditions should be checked before repainting
Can P5040I be used on an exterior facade?
Yes. P5040I is suitable for decorative exterior applications such as villa entrances, terraces, shopfronts and classical facade bays. Exterior use requires a UV-resistant paint system, and all joints and screw points should be sealed with exterior-grade filler. The capital is a decorative element only; it does not carry structural loads. The substrate, fixing method and complete coating system should be assessed for the specific project conditions.
How is the Ionic pilaster capital installed and painted?
Install P5040I on a clean, dry and sound surface. Make 45-degree mitre cuts where adjoining profiles require them, apply polyurethane (PU) mounting adhesive, position the part and add screws for mandatory mechanical support. Fill the joints and fixing points, then sand with 180-220 grit abrasive paper. Apply an additional primer if required by the paint manufacturer and finish with two compatible coats of water-based or synthetic paint. Silicone should not be used as the mounting adhesive.
How durable is the material, and what is the product weight?
The rigid, closed-cell material has a density of 150-220 kg/m³, water absorption below 1% and dimensional stability across -20 °C / +70 °C. These properties support long-term decorative use when the paint and installation are appropriate. The individual product weight is not specified in the supplied technical data, so it should not be estimated. P5040I is decorative and must not be used as a load-bearing component.
What advantages does it have over plaster or timber?
P5040I is lighter and less prone to breakage than comparable plaster elements, which can simplify handling during installation. Unlike timber, the closed-cell material is resistant to moisture-related decay and insect damage. It also preserves crisp moulded detail, can be filled and sanded after fixing, and accepts water-based or synthetic paint. These benefits make it practical for both controlled interior decoration and properly coated exterior detailing.
Can the P5040I surface be customised with paint?
Yes. P5040I arrives with a factory-primed, paint-ready surface and can be finished in a colour selected for the project. Water-based and synthetic paints are suitable when their manufacturer requirements are followed. An extra primer may be applied at the customer's discretion, but paint manufacturers may exclude warranty coverage when their own primer is not used. For exterior installations, UV-resistant paint is required to reduce colour change and protect the finish.