42x42x29 cm Pilaster Column Polyurethane Decorative Product
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Belirtilmemiş |
| Color | Belirtilmemiş; boyanabilir |
| Density | Belirtilmemiş |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 42 cm |
| Dimensions | 424 × 424 × 291 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5030I is a polyurethane decorative product designed as a pilaster column element for architectural detailing on interior and exterior surfaces. With its compact 42 x 42 x 29 cm format, the piece can define a vertical architectural zone without the visual and handling burden associated with solid masonry or cast plaster. It is a decorative component and must not be treated as a structural load-bearing column.
The pilaster column is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This structure combines low weight with a firm surface suitable for architectural finishing. The material has water absorption below 1%, high dimensional stability and resistance to rot, mould and freeze-thaw exposure. Its stated temperature range is -100 °C / +80 °C, while its B2 fire reaction means it is difficult to ignite and tends to self-extinguish when the flame source is removed. These properties support use in carefully prepared indoor and outdoor decorative applications.
The 42 x 42 cm section gives the pilaster column a substantial visual presence, while the 29 cm height makes it suitable for a defined architectural detail rather than a full-height shaft. The decorative surface arrives with a factory primer that prepares it for finishing. Water-based or synthetic paint can be selected to coordinate the pilaster with wall colours, facade trim, entrance doors or surrounding classical details. Additional primer is optional, but paint manufacturers may not provide a warranty for surfaces painted without their own primer system; Polure does not warrant the paints used and accepts no responsibility for the selected coating system.
In interiors, the P5030I pilaster column can frame an entrance opening, strengthen the composition around a living-room feature wall or add vertical definition to a hotel lobby, restaurant or office reception area. It can also be arranged beside a fireplace surround or used at the ends of a decorative wall treatment. Outdoors, the piece can be applied to villa entrances, porticos and facade compositions when finished with a UV-resistant exterior paint. The element remains decorative and should be fixed to an existing suitable substrate rather than used to support a balcony, roof or building load.
Installation begins with a clean, dry and sound surface. Any required cutting should be made with accurate 45-degree mitre joints where adjoining pieces meet. Apply polyurethane (PU) mounting adhesive; silicone adhesive must not be used. Mechanical fixing with suitable screws is mandatory, with plugs or other supports selected according to the substrate and the product section. Fill joints and screw points, sand with 180-220 grit abrasive paper, apply the chosen primer system and finish with two coats of paint. For exterior work, seal joints and fixing points with exterior-grade filler and maintain the UV-resistant coating.
Compared with plaster, rigid polyurethane is lighter and less prone to breakage during handling; compared with wood, it is resistant to moisture, decay and insects; compared with EPS, it offers a firmer surface and sharper decorative definition. The P5030I pilaster column therefore provides a practical route to architectural framing where controlled weight, paintability and durable detailing are important.
- The P5030I pilaster column is suited to interior and exterior architectural framing where a vertical decorative element is needed
- In a living room, place pilasters at the sides of a feature wall, fireplace surround or media wall to establish a balanced composition
- In an entrance hall, use the 42 x 42 cm section to mark a doorway or transition between adjoining spaces
- The product can also define wall zones in a hotel lobby, restaurant, office reception or formal dining room
- For a villa facade, apply pilaster elements around an entrance, portico or selected wall bays, keeping the arrangement decorative rather than structural
- The 29 cm height makes this piece appropriate for compact architectural accents and coordinated assemblies with other trim elements
- Before exterior installation, choose a UV-resistant paint and seal joints and fixing points with exterior-grade filler
- Paint colour can be matched to facade trim, doors or surrounding wall finishes
- Prepare a clean, dry and stable application surface, then check the layout and joint positions before fixing
- Cut adjoining pieces with accurate 45-degree mitre joints where required
- Apply polyurethane (PU) mounting adhesive to the rear contact areas; do not use silicone adhesive
- Mechanical fixing with screws is mandatory, and suitable plugs or supports must be selected for the substrate and the product section
- A wider or more exposed installation may require additional mechanical support
- Fill joints and screw points with suitable filler, then sand the repaired areas using 180-220 grit abrasive paper
- Apply the selected primer system and finish with two coats of paint
- For exterior applications, close all joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the pilaster column with a soft, damp cloth and avoid abrasive cleaners, hard brushes and aggressive solvents
- Inspect painted areas periodically, especially outdoors, for scratches, open joints or coating wear
- Exterior surfaces must retain a UV-resistant paint system; repair exposed areas promptly with compatible products
- Do not use the pilaster as a structural support or attach loads to it without checking the substrate and fixing design
- Additional primer is optional, but the paint manufacturer's system should be followed because coating warranties may depend on primer selection
Can the P5030I pilaster column be used outdoors?
Yes. The P5030I is suitable for exterior decorative use when it is fixed to a sound substrate, finished with UV-resistant exterior paint and protected at joints and screw points with exterior-grade filler. The polyurethane element is decorative, not structural, so it must not carry balcony, roof or facade loads. Outdoor exposure should also be considered when selecting the coating system and planning periodic maintenance.
How is the pilaster column installed and painted?
Start with a clean, dry surface and position the pieces accurately. Use polyurethane (PU) mounting adhesive together with mandatory mechanical screw fixing; silicone adhesive is not suitable. Prepare 45-degree mitre joints where needed, fill joints and screw points, sand with 180-220 grit abrasive paper, apply the selected primer system and finish with two coats of paint. Exterior work requires UV-resistant paint.
How durable is the material, and what is its weight?
The P5030I is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its water absorption is below 1%, and it offers high dimensional stability with resistance to rot, mould and freeze-thaw exposure. The supplied product data does not state the individual piece weight, so a precise mass should not be assumed. The material remains decorative and does not replace a structural column.
What are the advantages over plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage than plaster during handling and installation. Unlike wood, it does not rot and is not vulnerable to insect attack in the same way. Compared with EPS, it provides a firmer surface and clearer decorative definition. The surface can be filled, sanded and repainted, allowing joints or minor surface marks to be finished before the final coating.
Can the 42 x 42 x 29 cm pilaster element be repainted?
Yes. The decorative surface is paintable and arrives with a factory primer that prepares it for finishing. Water-based and synthetic paints may be used when compatible with the primer and application environment. Additional primer is optional, not an unconditional requirement; however, paint manufacturers may exclude warranty coverage when their own primer system is not used. Polure does not warrant the selected paint or coating system.
Similar Products(Architectural Pilaster Columns)
P5030I is a polyurethane decorative product designed as a pilaster column element for architectural detailing on interior and exterior surfaces. With its compact 42 x 42 x 29 cm format, the piece can define a vertical architectural zone without the visual and handling burden associated with solid masonry or cast plaster. It is a decorative component and must not be treated as a structural load-bearing column.
The pilaster column is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This structure combines low weight with a firm surface suitable for architectural finishing. The material has water absorption below 1%, high dimensional stability and resistance to rot, mould and freeze-thaw exposure. Its stated temperature range is -100 °C / +80 °C, while its B2 fire reaction means it is difficult to ignite and tends to self-extinguish when the flame source is removed. These properties support use in carefully prepared indoor and outdoor decorative applications.
The 42 x 42 cm section gives the pilaster column a substantial visual presence, while the 29 cm height makes it suitable for a defined architectural detail rather than a full-height shaft. The decorative surface arrives with a factory primer that prepares it for finishing. Water-based or synthetic paint can be selected to coordinate the pilaster with wall colours, facade trim, entrance doors or surrounding classical details. Additional primer is optional, but paint manufacturers may not provide a warranty for surfaces painted without their own primer system; Polure does not warrant the paints used and accepts no responsibility for the selected coating system.
In interiors, the P5030I pilaster column can frame an entrance opening, strengthen the composition around a living-room feature wall or add vertical definition to a hotel lobby, restaurant or office reception area. It can also be arranged beside a fireplace surround or used at the ends of a decorative wall treatment. Outdoors, the piece can be applied to villa entrances, porticos and facade compositions when finished with a UV-resistant exterior paint. The element remains decorative and should be fixed to an existing suitable substrate rather than used to support a balcony, roof or building load.
Installation begins with a clean, dry and sound surface. Any required cutting should be made with accurate 45-degree mitre joints where adjoining pieces meet. Apply polyurethane (PU) mounting adhesive; silicone adhesive must not be used. Mechanical fixing with suitable screws is mandatory, with plugs or other supports selected according to the substrate and the product section. Fill joints and screw points, sand with 180-220 grit abrasive paper, apply the chosen primer system and finish with two coats of paint. For exterior work, seal joints and fixing points with exterior-grade filler and maintain the UV-resistant coating.
Compared with plaster, rigid polyurethane is lighter and less prone to breakage during handling; compared with wood, it is resistant to moisture, decay and insects; compared with EPS, it offers a firmer surface and sharper decorative definition. The P5030I pilaster column therefore provides a practical route to architectural framing where controlled weight, paintability and durable detailing are important.
- The P5030I pilaster column is suited to interior and exterior architectural framing where a vertical decorative element is needed
- In a living room, place pilasters at the sides of a feature wall, fireplace surround or media wall to establish a balanced composition
- In an entrance hall, use the 42 x 42 cm section to mark a doorway or transition between adjoining spaces
- The product can also define wall zones in a hotel lobby, restaurant, office reception or formal dining room
- For a villa facade, apply pilaster elements around an entrance, portico or selected wall bays, keeping the arrangement decorative rather than structural
- The 29 cm height makes this piece appropriate for compact architectural accents and coordinated assemblies with other trim elements
- Before exterior installation, choose a UV-resistant paint and seal joints and fixing points with exterior-grade filler
- Paint colour can be matched to facade trim, doors or surrounding wall finishes
- Prepare a clean, dry and stable application surface, then check the layout and joint positions before fixing
- Cut adjoining pieces with accurate 45-degree mitre joints where required
- Apply polyurethane (PU) mounting adhesive to the rear contact areas; do not use silicone adhesive
- Mechanical fixing with screws is mandatory, and suitable plugs or supports must be selected for the substrate and the product section
- A wider or more exposed installation may require additional mechanical support
- Fill joints and screw points with suitable filler, then sand the repaired areas using 180-220 grit abrasive paper
- Apply the selected primer system and finish with two coats of paint
- For exterior applications, close all joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the pilaster column with a soft, damp cloth and avoid abrasive cleaners, hard brushes and aggressive solvents
- Inspect painted areas periodically, especially outdoors, for scratches, open joints or coating wear
- Exterior surfaces must retain a UV-resistant paint system; repair exposed areas promptly with compatible products
- Do not use the pilaster as a structural support or attach loads to it without checking the substrate and fixing design
- Additional primer is optional, but the paint manufacturer's system should be followed because coating warranties may depend on primer selection
Can the P5030I pilaster column be used outdoors?
Yes. The P5030I is suitable for exterior decorative use when it is fixed to a sound substrate, finished with UV-resistant exterior paint and protected at joints and screw points with exterior-grade filler. The polyurethane element is decorative, not structural, so it must not carry balcony, roof or facade loads. Outdoor exposure should also be considered when selecting the coating system and planning periodic maintenance.
How is the pilaster column installed and painted?
Start with a clean, dry surface and position the pieces accurately. Use polyurethane (PU) mounting adhesive together with mandatory mechanical screw fixing; silicone adhesive is not suitable. Prepare 45-degree mitre joints where needed, fill joints and screw points, sand with 180-220 grit abrasive paper, apply the selected primer system and finish with two coats of paint. Exterior work requires UV-resistant paint.
How durable is the material, and what is its weight?
The P5030I is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its water absorption is below 1%, and it offers high dimensional stability with resistance to rot, mould and freeze-thaw exposure. The supplied product data does not state the individual piece weight, so a precise mass should not be assumed. The material remains decorative and does not replace a structural column.
What are the advantages over plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage than plaster during handling and installation. Unlike wood, it does not rot and is not vulnerable to insect attack in the same way. Compared with EPS, it provides a firmer surface and clearer decorative definition. The surface can be filled, sanded and repainted, allowing joints or minor surface marks to be finished before the final coating.
Can the 42 x 42 x 29 cm pilaster element be repainted?
Yes. The decorative surface is paintable and arrives with a factory primer that prepares it for finishing. Water-based and synthetic paints may be used when compatible with the primer and application environment. Additional primer is optional, not an unconditional requirement; however, paint manufacturers may exclude warranty coverage when their own primer system is not used. Polure does not warrant the selected paint or coating system.