Polyurethane Decorative Product: Ionic Pilaster 18x35x24 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif yüzey dokusu |
| Color | Üretici renk bilgisi belirtilmemiştir; boyanabilir. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 18 cm |
| Dimensions | 177 × 353 × 242 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
An Ionic pilaster capital is a decorative architectural element that completes pilaster applications on interior walls and exterior facades. P5025I50 adds a defined classical transition at the upper end of a pilaster, helping frame entrances, windows, wall compositions and facade details without functioning as a structural load-bearing component.
Made from rigid, closed-cell polyurethane, the pilaster capital combines low weight with a hard, stable body suitable for detailed architectural decoration. Its dimensions are 18 x 35 x 24 cm, measured as width x length x height, making it a compact component for proportioned pilaster layouts and smaller facade or interior compositions. The material density is 150-220 kg/m³, with water absorption below 1%. It remains dimensionally stable and is specified for temperatures from -100 °C to +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed.
The visible surface presents a decorative Ionic treatment with balanced classical geometry, designed to sit above a pilaster shaft as a clear visual termination. The factory-primed finish accepts water-based and synthetic paints, allowing the capital to match wall, ceiling or facade colours. The factory primer prepares the surface for painting; additional primer remains optional and should be selected according to the paint manufacturer's system. Polure does not provide a guarantee for paint systems and accepts no responsibility for the performance of paint applied without the manufacturer's recommended primer.
Use the Ionic pilaster capital in entrance halls, living rooms, dining areas, hotel lobbies, restaurants and reception spaces where a vertical architectural composition needs a defined upper detail. Outdoors, it can complete pilasters around villa entrances, framed facade sections and sheltered architectural features when finished with UV-resistant exterior paint. The capital is decorative only and must not be treated as a structural support or used to carry building loads.
For installation, prepare a clean, dry and sound substrate, then check the profile orientation and contact surfaces. Cut adjoining polyurethane elements with a 45-degree mitre where required. Apply polyurethane (PU) mounting adhesive, never silicone adhesive, and secure the component with mechanical fasteners such as screws where required. Mechanical fixing is mandatory. Fill joints and screw points with suitable filler, sand with 180-220 grit abrasive paper, apply the selected primer system and finish with two coats of paint. Exterior joints and fixing points require exterior-grade filler.
Compared with plaster, the polyurethane decorative product is lighter and less prone to breakage during handling; compared with wood, it resists moisture-related decay and insect damage. Its closed-cell construction supports practical interior and exterior detailing, while the repairable, sandable and paintable surface allows future finish maintenance. P5025I50 is a precise finishing element for pilaster compositions that need a compact Ionic profile and adaptable colour treatment.
- The P5025I50 Ionic pilaster capital is designed for the upper termination of decorative pilasters in both interior and exterior applications
- In a living room or dining room, place it above vertical pilaster shafts to frame a feature wall, fireplace surround or transition between wall sections
- In an entrance hall, it can define a doorway composition without adding the mass of plaster
- Hotel lobbies, restaurants and reception areas can use the Ionic profile to establish a classical architectural rhythm around portals, niches or divided wall panels
- For a villa facade, install it above pilasters around the main entrance, selected windows or sheltered facade bays
- The 18 x 35 x 24 cm format suits compact and medium-scale compositions where a clearly visible capital is required without overwhelming the surrounding architecture
- Use a coordinated paint colour for a unified facade, or apply a contrasting shade to make the capital read as a separate architectural detail
- Exterior use requires UV-resistant paint and careful sealing of joints and screw points with exterior-grade filler
- Begin with a clean, dry, flat and sound substrate
- Check the Ionic orientation, the contact area and the relationship between the capital and the pilaster shaft before fixing
- Where adjoining pieces require trimming, make a precise 45-degree mitre cut
- Apply polyurethane (PU) mounting adhesive to the prepared contact surfaces; silicone adhesive must not be used
- Secure the pilaster capital with screws and suitable mechanical fixing, as mechanical fastening is mandatory
- Do not treat the decorative element as load-bearing
- Fill joints and screw recesses with suitable filler, then sand with 180-220 grit abrasive paper
- Apply the chosen primer system and finish with two coats of water-based or synthetic paint
- For exterior applications, use UV-resistant paint and exterior-grade filler at every joint and fixing point
- Follow the paint manufacturer's application requirements, since additional primer may be selected for system compatibility
- Clean the polyurethane pilaster capital with a soft, dry or lightly damp cloth
- Avoid abrasive pads, aggressive solvents and harsh cleaning products that could mark the painted or decorative surface
- Inspect exterior installations periodically for paint wear, open joints or exposed screw points, especially on highly sun-exposed elevations
- If the finish needs renewal, repair the joint or fixing area, lightly sand the surface where appropriate, apply the compatible primer system if selected, and repaint with UV-resistant exterior paint
- Paint performance depends on the chosen coating system and exposure conditions; Polure does not guarantee paint products applied to the installation
Can the Ionic pilaster capital be used outdoors?
Yes. P5025I50 can be used on exterior facade compositions as a decorative, non-structural element. Outdoor installation requires a UV-resistant paint system, plus exterior-grade filler at joints and screw points. The product should be fixed to a clean, dry and sound substrate with polyurethane (PU) mounting adhesive and mandatory mechanical fastening. It must not be used as a load-bearing capital or structural support.
How is P5025I50 installed and painted?
Prepare the substrate, check the orientation and make any required 45-degree mitre cuts. Use polyurethane (PU) mounting adhesive rather than silicone, then secure the capital with screws and suitable mechanical fixings. Fill joints and fixing points, sand with 180-220 grit abrasive paper, select the compatible primer system and apply two coats of water-based or synthetic paint. Exterior work requires UV-resistant paint.
What are the material properties of this pilaster capital?
P5025I50 is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Water absorption is below 1%, and the material offers high dimensional stability. Its specified temperature range is -100 °C to +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed. These properties describe the decorative material, not a structural load capacity.
What advantages does polyurethane offer over plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage in handling than plaster. Unlike wood, it does not suffer from moisture-related decay or insect damage under normal finished-use conditions. The closed-cell body supports low water absorption, while the surface can be filled, sanded, primed and repainted. These characteristics make the Ionic pilaster capital practical for detailed interior decoration and properly finished exterior applications.
Can the pilaster capital be painted in a custom colour?
Yes. The factory-primed surface is prepared to receive water-based or synthetic paint, so the capital can be coordinated with the surrounding wall, pilaster shaft or facade. Additional primer is optional and should be chosen according to the paint manufacturer's system. Paint manufacturers may not guarantee finishes applied without their recommended primer, and Polure does not guarantee the selected paint system.
Similar Products(Architectural Pilaster Columns)
An Ionic pilaster capital is a decorative architectural element that completes pilaster applications on interior walls and exterior facades. P5025I50 adds a defined classical transition at the upper end of a pilaster, helping frame entrances, windows, wall compositions and facade details without functioning as a structural load-bearing component.
Made from rigid, closed-cell polyurethane, the pilaster capital combines low weight with a hard, stable body suitable for detailed architectural decoration. Its dimensions are 18 x 35 x 24 cm, measured as width x length x height, making it a compact component for proportioned pilaster layouts and smaller facade or interior compositions. The material density is 150-220 kg/m³, with water absorption below 1%. It remains dimensionally stable and is specified for temperatures from -100 °C to +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed.
The visible surface presents a decorative Ionic treatment with balanced classical geometry, designed to sit above a pilaster shaft as a clear visual termination. The factory-primed finish accepts water-based and synthetic paints, allowing the capital to match wall, ceiling or facade colours. The factory primer prepares the surface for painting; additional primer remains optional and should be selected according to the paint manufacturer's system. Polure does not provide a guarantee for paint systems and accepts no responsibility for the performance of paint applied without the manufacturer's recommended primer.
Use the Ionic pilaster capital in entrance halls, living rooms, dining areas, hotel lobbies, restaurants and reception spaces where a vertical architectural composition needs a defined upper detail. Outdoors, it can complete pilasters around villa entrances, framed facade sections and sheltered architectural features when finished with UV-resistant exterior paint. The capital is decorative only and must not be treated as a structural support or used to carry building loads.
For installation, prepare a clean, dry and sound substrate, then check the profile orientation and contact surfaces. Cut adjoining polyurethane elements with a 45-degree mitre where required. Apply polyurethane (PU) mounting adhesive, never silicone adhesive, and secure the component with mechanical fasteners such as screws where required. Mechanical fixing is mandatory. Fill joints and screw points with suitable filler, sand with 180-220 grit abrasive paper, apply the selected primer system and finish with two coats of paint. Exterior joints and fixing points require exterior-grade filler.
Compared with plaster, the polyurethane decorative product is lighter and less prone to breakage during handling; compared with wood, it resists moisture-related decay and insect damage. Its closed-cell construction supports practical interior and exterior detailing, while the repairable, sandable and paintable surface allows future finish maintenance. P5025I50 is a precise finishing element for pilaster compositions that need a compact Ionic profile and adaptable colour treatment.
- The P5025I50 Ionic pilaster capital is designed for the upper termination of decorative pilasters in both interior and exterior applications
- In a living room or dining room, place it above vertical pilaster shafts to frame a feature wall, fireplace surround or transition between wall sections
- In an entrance hall, it can define a doorway composition without adding the mass of plaster
- Hotel lobbies, restaurants and reception areas can use the Ionic profile to establish a classical architectural rhythm around portals, niches or divided wall panels
- For a villa facade, install it above pilasters around the main entrance, selected windows or sheltered facade bays
- The 18 x 35 x 24 cm format suits compact and medium-scale compositions where a clearly visible capital is required without overwhelming the surrounding architecture
- Use a coordinated paint colour for a unified facade, or apply a contrasting shade to make the capital read as a separate architectural detail
- Exterior use requires UV-resistant paint and careful sealing of joints and screw points with exterior-grade filler
- Begin with a clean, dry, flat and sound substrate
- Check the Ionic orientation, the contact area and the relationship between the capital and the pilaster shaft before fixing
- Where adjoining pieces require trimming, make a precise 45-degree mitre cut
- Apply polyurethane (PU) mounting adhesive to the prepared contact surfaces; silicone adhesive must not be used
- Secure the pilaster capital with screws and suitable mechanical fixing, as mechanical fastening is mandatory
- Do not treat the decorative element as load-bearing
- Fill joints and screw recesses with suitable filler, then sand with 180-220 grit abrasive paper
- Apply the chosen primer system and finish with two coats of water-based or synthetic paint
- For exterior applications, use UV-resistant paint and exterior-grade filler at every joint and fixing point
- Follow the paint manufacturer's application requirements, since additional primer may be selected for system compatibility
- Clean the polyurethane pilaster capital with a soft, dry or lightly damp cloth
- Avoid abrasive pads, aggressive solvents and harsh cleaning products that could mark the painted or decorative surface
- Inspect exterior installations periodically for paint wear, open joints or exposed screw points, especially on highly sun-exposed elevations
- If the finish needs renewal, repair the joint or fixing area, lightly sand the surface where appropriate, apply the compatible primer system if selected, and repaint with UV-resistant exterior paint
- Paint performance depends on the chosen coating system and exposure conditions; Polure does not guarantee paint products applied to the installation
Can the Ionic pilaster capital be used outdoors?
Yes. P5025I50 can be used on exterior facade compositions as a decorative, non-structural element. Outdoor installation requires a UV-resistant paint system, plus exterior-grade filler at joints and screw points. The product should be fixed to a clean, dry and sound substrate with polyurethane (PU) mounting adhesive and mandatory mechanical fastening. It must not be used as a load-bearing capital or structural support.
How is P5025I50 installed and painted?
Prepare the substrate, check the orientation and make any required 45-degree mitre cuts. Use polyurethane (PU) mounting adhesive rather than silicone, then secure the capital with screws and suitable mechanical fixings. Fill joints and fixing points, sand with 180-220 grit abrasive paper, select the compatible primer system and apply two coats of water-based or synthetic paint. Exterior work requires UV-resistant paint.
What are the material properties of this pilaster capital?
P5025I50 is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Water absorption is below 1%, and the material offers high dimensional stability. Its specified temperature range is -100 °C to +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed. These properties describe the decorative material, not a structural load capacity.
What advantages does polyurethane offer over plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage in handling than plaster. Unlike wood, it does not suffer from moisture-related decay or insect damage under normal finished-use conditions. The closed-cell body supports low water absorption, while the surface can be filled, sanded, primed and repainted. These characteristics make the Ionic pilaster capital practical for detailed interior decoration and properly finished exterior applications.
Can the pilaster capital be painted in a custom colour?
Yes. The factory-primed surface is prepared to receive water-based or synthetic paint, so the capital can be coordinated with the surrounding wall, pilaster shaft or facade. Additional primer is optional and should be chosen according to the paint manufacturer's system. Paint manufacturers may not guarantee finishes applied without their recommended primer, and Polure does not guarantee the selected paint system.