Polyurethane Decoration Product Ionic Pilaster Capital 28x28x19 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif yüzey dokusu |
| Color | Boyanabilir; uygulama rengine göre boyanır. |
| Density | 150-220 kg/m³ (production target ~160 kg/m³) |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 28 cm |
| Dimensions | 283 × 283 × 194 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
The P5020I Ionic Pilaster Capital is a decorative architectural element designed to finish the upper section of a pilaster column with a clearly defined classical profile. Measuring 28 x 28 x 19 cm, the capital has a compact square footprint and a substantial 19 cm projection, making it suitable for framing pilasters in entrance compositions, wall elevations and interior architectural features. Its decorative surface texture adds visual definition without turning the piece into a structural component.
The P5020I is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This material offers a useful balance of low weight and firm detail retention compared with plaster, concrete or solid timber. Water absorption remains below 1%, while the material is dimensionally stable under normal architectural use. The stated service temperature range is -100 °C / +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed; its fire reaction is classified as B2 within the stated material information.
The Ionic Pilaster Capital arrives with a factory primer that prepares the surface for a finishing system. It can be painted with water-based or synthetic paint, allowing the colour to follow the surrounding wall, column or facade scheme. Additional primer application is optional rather than automatically unnecessary: paint manufacturers may not provide a warranty when their own primer system is not used. Polure does not guarantee the compatibility or performance of third-party paint systems and accepts no responsibility for the selected coating system.
Use the P5020I above pilasters in residential entrances, reception areas, hotel lobbies, restaurants and formal office interiors. On a villa facade or commercial elevation, the capital can complete a pilaster composition beneath a cornice or at the transition between the vertical shaft and upper architectural detailing. The capital is decorative only and must not be treated as a load-bearing component. It may be applied over an existing structural column or wall, provided that the substrate and fixing design are suitable.
For installation, work on a clean, dry, sound and even surface. Where joints or adjustments are required, use accurate 45-degree mitre cuts. Apply polyurethane (PU) mounting adhesive and secure the capital mechanically with suitable screws; mechanical fixing is mandatory, particularly where the piece is exposed to connection loads or exterior conditions. Fill joints and screw points, sand with 180-220 grit paper, apply the selected primer system if required, and finish with two paint coats. Silicone adhesive is not suitable for this application.
Compared with plaster, the P5020I is easier to handle and less vulnerable to breakage during fitting. Unlike timber, rigid polyurethane does not rot and offers better resistance to moisture and insects. Its closed-cell structure also supports long-term decorative use, while filled and sanded areas can be repaired during refurbishment. The result is a practical Ionic capital for coordinated interior or exterior pilaster detailing.
- The P5020I Ionic Pilaster Capital is intended for the upper termination of decorative pilasters
- In a home entrance, place it above a pilaster shaft to define the transition into a cornice or upper wall band
- In a living room or formal dining room, it can frame a wall feature, fireplace surround or architectural niche when the surrounding proportions are planned around its 28 x 28 cm footprint and 19 cm height
- Hotel lobbies, restaurant entrances and reception areas can use the capital to organise repeated pilaster bays without adding the weight of plaster or stone
- For a villa facade, the P5020I can complete pilasters around an entrance, portal or selected window composition
- It is also suitable for office interiors and commercial decorative schemes
- Exterior application requires a suitable exterior paint system with UV resistance
- The capital is decorative, not load-bearing, and should be fixed over a suitable structural background
- Check the pilaster layout and confirm that the substrate is clean, dry, sound and level before positioning the P5020I
- Dry-fit the capital to verify alignment with the pilaster shaft, adjoining mouldings and any cornice
- If a joint or adjustment is required, make a precise 45-degree mitre cut with the appropriate tool
- Apply polyurethane (PU) mounting adhesive to the prepared contact areas, then secure the piece mechanically with suitable screws
- Mechanical fixing is mandatory because the product has its own weight and connection loads
- Do not use silicone adhesive
- Fill joints and screw recesses with a suitable filler, sand with 180-220 grit paper, apply the selected additional primer system where required, and finish with two coats of compatible paint
- Clean the P5020I Ionic Pilaster Capital with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive cleaners, scouring pads, solvents and hard impacts that could mark the decorative surface or damage the paint layer
- Inspect exterior installations periodically, especially around joints, screw points and exposed edges
- If the coating shows wear, cracking or loss of adhesion, repair the affected area with a compatible exterior filler and paint system
- UV-resistant exterior paint is required for outdoor use because unpainted polyurethane may yellow under prolonged sunlight
- Paint manufacturer instructions should determine cleaning and recoating compatibility
Can the P5020I Ionic Pilaster Capital be used outdoors?
Yes. The P5020I is suitable for interior and exterior decorative applications when it is installed on a sound substrate and finished with a compatible UV-resistant exterior paint system. Its closed-cell rigid polyurethane has water absorption below 1% and remains dimensionally stable within the stated temperature range of -100 °C / +80 °C. Outdoor installation still requires correct mechanical fixing, sealed joints and protected screw points. The product is decorative only and must not be specified as a load-bearing architectural element.
How is the pilaster capital mounted and painted?
Prepare a clean, dry, solid and even surface, then test the position before bonding. Use polyurethane (PU) mounting adhesive and secure the capital with suitable screws; silicone must not be used. Where a joint is needed, make a precise 45-degree mitre cut. Fill the joints and fixing points, sand with 180-220 grit paper, and apply the chosen primer system if required. Finish with two compatible paint coats. The factory primer prepares the surface for painting, while any additional primer remains optional and depends on the paint manufacturer’s system.
How durable is the P5020I and how much does it weigh?
The P5020I is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This gives the capital a firm, detail-retaining structure while keeping it substantially lighter than plaster, concrete or solid timber of comparable volume. An exact product weight is not stated and should not be estimated from the dimensions alone. Durability depends on correct substrate preparation, mechanical fixing, joint treatment and the selected paint system. The material resists moisture-related deterioration and can be repaired if filled, sanded or painted areas are damaged.
What are the advantages over a plaster or timber pilaster capital?
Compared with plaster, the P5020I is lighter and less prone to breakage during handling and installation. Compared with timber, rigid polyurethane does not rot and offers better resistance to moisture and insects. The closed-cell structure supports low water absorption, while the moulded form preserves the decorative profile consistently from piece to piece. Unlike an architectural structural component, the P5020I is a non-load-bearing decorative element. It can be filled, sanded, repainted and maintained as part of a longer-term interior or facade finish.
Can the Ionic Pilaster Capital be repainted in a custom colour?
Yes. The P5020I is supplied with a factory primer and can be painted with water-based or synthetic paint. The final colour may be selected to coordinate with the pilaster shaft, wall, cornice or facade. A further primer coat is optional, but paint manufacturers may not guarantee results when their own primer system is not used. Polure does not guarantee third-party paint compatibility or accept responsibility for the selected coating. For outdoor use, choose a UV-resistant exterior system and follow the coating manufacturer’s preparation and application instructions.
Similar Products(Architectural Pilaster Columns)
The P5020I Ionic Pilaster Capital is a decorative architectural element designed to finish the upper section of a pilaster column with a clearly defined classical profile. Measuring 28 x 28 x 19 cm, the capital has a compact square footprint and a substantial 19 cm projection, making it suitable for framing pilasters in entrance compositions, wall elevations and interior architectural features. Its decorative surface texture adds visual definition without turning the piece into a structural component.
The P5020I is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This material offers a useful balance of low weight and firm detail retention compared with plaster, concrete or solid timber. Water absorption remains below 1%, while the material is dimensionally stable under normal architectural use. The stated service temperature range is -100 °C / +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed; its fire reaction is classified as B2 within the stated material information.
The Ionic Pilaster Capital arrives with a factory primer that prepares the surface for a finishing system. It can be painted with water-based or synthetic paint, allowing the colour to follow the surrounding wall, column or facade scheme. Additional primer application is optional rather than automatically unnecessary: paint manufacturers may not provide a warranty when their own primer system is not used. Polure does not guarantee the compatibility or performance of third-party paint systems and accepts no responsibility for the selected coating system.
Use the P5020I above pilasters in residential entrances, reception areas, hotel lobbies, restaurants and formal office interiors. On a villa facade or commercial elevation, the capital can complete a pilaster composition beneath a cornice or at the transition between the vertical shaft and upper architectural detailing. The capital is decorative only and must not be treated as a load-bearing component. It may be applied over an existing structural column or wall, provided that the substrate and fixing design are suitable.
For installation, work on a clean, dry, sound and even surface. Where joints or adjustments are required, use accurate 45-degree mitre cuts. Apply polyurethane (PU) mounting adhesive and secure the capital mechanically with suitable screws; mechanical fixing is mandatory, particularly where the piece is exposed to connection loads or exterior conditions. Fill joints and screw points, sand with 180-220 grit paper, apply the selected primer system if required, and finish with two paint coats. Silicone adhesive is not suitable for this application.
Compared with plaster, the P5020I is easier to handle and less vulnerable to breakage during fitting. Unlike timber, rigid polyurethane does not rot and offers better resistance to moisture and insects. Its closed-cell structure also supports long-term decorative use, while filled and sanded areas can be repaired during refurbishment. The result is a practical Ionic capital for coordinated interior or exterior pilaster detailing.
- The P5020I Ionic Pilaster Capital is intended for the upper termination of decorative pilasters
- In a home entrance, place it above a pilaster shaft to define the transition into a cornice or upper wall band
- In a living room or formal dining room, it can frame a wall feature, fireplace surround or architectural niche when the surrounding proportions are planned around its 28 x 28 cm footprint and 19 cm height
- Hotel lobbies, restaurant entrances and reception areas can use the capital to organise repeated pilaster bays without adding the weight of plaster or stone
- For a villa facade, the P5020I can complete pilasters around an entrance, portal or selected window composition
- It is also suitable for office interiors and commercial decorative schemes
- Exterior application requires a suitable exterior paint system with UV resistance
- The capital is decorative, not load-bearing, and should be fixed over a suitable structural background
- Check the pilaster layout and confirm that the substrate is clean, dry, sound and level before positioning the P5020I
- Dry-fit the capital to verify alignment with the pilaster shaft, adjoining mouldings and any cornice
- If a joint or adjustment is required, make a precise 45-degree mitre cut with the appropriate tool
- Apply polyurethane (PU) mounting adhesive to the prepared contact areas, then secure the piece mechanically with suitable screws
- Mechanical fixing is mandatory because the product has its own weight and connection loads
- Do not use silicone adhesive
- Fill joints and screw recesses with a suitable filler, sand with 180-220 grit paper, apply the selected additional primer system where required, and finish with two coats of compatible paint
- Clean the P5020I Ionic Pilaster Capital with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive cleaners, scouring pads, solvents and hard impacts that could mark the decorative surface or damage the paint layer
- Inspect exterior installations periodically, especially around joints, screw points and exposed edges
- If the coating shows wear, cracking or loss of adhesion, repair the affected area with a compatible exterior filler and paint system
- UV-resistant exterior paint is required for outdoor use because unpainted polyurethane may yellow under prolonged sunlight
- Paint manufacturer instructions should determine cleaning and recoating compatibility
Can the P5020I Ionic Pilaster Capital be used outdoors?
Yes. The P5020I is suitable for interior and exterior decorative applications when it is installed on a sound substrate and finished with a compatible UV-resistant exterior paint system. Its closed-cell rigid polyurethane has water absorption below 1% and remains dimensionally stable within the stated temperature range of -100 °C / +80 °C. Outdoor installation still requires correct mechanical fixing, sealed joints and protected screw points. The product is decorative only and must not be specified as a load-bearing architectural element.
How is the pilaster capital mounted and painted?
Prepare a clean, dry, solid and even surface, then test the position before bonding. Use polyurethane (PU) mounting adhesive and secure the capital with suitable screws; silicone must not be used. Where a joint is needed, make a precise 45-degree mitre cut. Fill the joints and fixing points, sand with 180-220 grit paper, and apply the chosen primer system if required. Finish with two compatible paint coats. The factory primer prepares the surface for painting, while any additional primer remains optional and depends on the paint manufacturer’s system.
How durable is the P5020I and how much does it weigh?
The P5020I is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This gives the capital a firm, detail-retaining structure while keeping it substantially lighter than plaster, concrete or solid timber of comparable volume. An exact product weight is not stated and should not be estimated from the dimensions alone. Durability depends on correct substrate preparation, mechanical fixing, joint treatment and the selected paint system. The material resists moisture-related deterioration and can be repaired if filled, sanded or painted areas are damaged.
What are the advantages over a plaster or timber pilaster capital?
Compared with plaster, the P5020I is lighter and less prone to breakage during handling and installation. Compared with timber, rigid polyurethane does not rot and offers better resistance to moisture and insects. The closed-cell structure supports low water absorption, while the moulded form preserves the decorative profile consistently from piece to piece. Unlike an architectural structural component, the P5020I is a non-load-bearing decorative element. It can be filled, sanded, repainted and maintained as part of a longer-term interior or facade finish.
Can the Ionic Pilaster Capital be repainted in a custom colour?
Yes. The P5020I is supplied with a factory primer and can be painted with water-based or synthetic paint. The final colour may be selected to coordinate with the pilaster shaft, wall, cornice or facade. A further primer coat is optional, but paint manufacturers may not guarantee results when their own primer system is not used. Polure does not guarantee third-party paint compatibility or accept responsibility for the selected coating. For outdoor use, choose a UV-resistant exterior system and follow the coating manufacturer’s preparation and application instructions.