The P36060 decorative cladding element is engineered to introduce a distinct architectural dimension to both residential and commercial spaces. Measuring 600x600 mm with a slim 12 mm profile, this square panel serves as a versatile surface treatment for walls, ceilings, and custom furniture. It offers a sophisticated alternative to traditional flat surfaces, transforming ordinary walls into dynamic design features that interact beautifully with ambient light.
Manufactured from high-density rigid polyurethane, the panel possesses a density of 150-220 kg/m³, delivering a wood-like surface hardness while remaining exceptionally lightweight. This closed-cell material features low water absorption (below 1%), making it resistant to moisture, rot, and insect damage. Unlike MDF or plaster, it maintains absolute dimensional stability, meaning it will not warp, shrink, or expand under varying temperature and humidity conditions.
The visual composition of the P36060 model is defined by a bold diagonal division. One half of the panel features a series of parallel horizontal grooves that sharply transition into a 45-degree angle near the top right corner. The opposing half consists of a completely smooth, minimalist triangular plane. This juxtaposition of deep linear texture and clean flat surface creates a striking geometric contrast, allowing designers to play with shadows and orientation to build custom wall configurations.
This architectural panel is highly recommended for high-impact zones such as hotel reception desks, restaurant dining areas, office lobbies, and modern living room feature walls. Due to its superior weather resistance, it can also be safely applied to exterior facades, entrance portals, and covered terraces, provided it is finished with a UV-resistant coating to protect the material from sun exposure.
The panel is delivered with a factory-applied primer that prepares the surface for painting. However, because paint manufacturers do not guarantee adhesion without their proprietary priming systems, the application of an additional primer is optional and remains at the buyer's discretion; Polure does not assume responsibility for paint performance. Installation requires a polyurethane (PU) assembly adhesive combined with screw fasteners for mandatory mechanical stability. Joints and screw points should be filled, sanded with 180-220 grit, and finished with two coats of quality water-based or synthetic paint.
