50x50x240 cm Fluted Pilaster Column Polyurethane Decorative Product
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Grooved decorative surface |
| Color | Not specified |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 50 cm |
| Dimensions | 500 × 500 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Fluted pilaster columns are decorative architectural elements that add vertical structure to walls, entrances and facade compositions without functioning as load-bearing supports. The P5050 combines a 50x50x240 cm format with regularly aligned vertical grooves, creating a clear rhythm of light and shadow along the surface. Its tall proportions suit full-height applications and can also be coordinated with complementary bases, capitals or surrounding wall trims where the project design requires them.
The P5050 is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction provides a useful balance between low weight and a firm, detailed profile. Water absorption is below 1%, while the material offers high dimensional stability against ordinary expansion, shrinkage and warping. Dimensional stability has been tested within -20 °C / +70 °C without form loss. The product has fire class B2 (DIN 4102-1); its fire reaction is classified as B2. These properties support both indoor and suitable outdoor decorative applications.
The defining visual feature of the P5050 is its continuous fluted face. The parallel vertical channels emphasize height, frame an opening or divide a broad wall into balanced sections without introducing an unverified ornamental motif. The supplied factory primer prepares the surface for water-based or synthetic paint. Additional primer is optional and remains the customer's choice. Paint manufacturers may not provide a warranty for surfaces painted without their own primer systems, and Polure does not guarantee the compatibility or performance of the selected paint system.
Inside, the pilaster can be used to frame a living-room feature wall, organize an entrance hall, accent a bedroom wall or strengthen the architectural language of a hotel lobby, office reception area or restaurant interior. Outdoors, the P5050 can be applied as a decorative covering over suitable existing columns or facade zones on villas, commercial buildings and hospitality projects. It is not a structural column. For exterior work, a UV-resistant paint system is mandatory, and joints and screw points should be finished with exterior-grade filler.
Installation begins with a clean, dry and sound substrate. Cut adjoining pieces with a 45-degree mitre where the design requires a corner transition, then apply polyurethane (PU) mounting adhesive. Mechanical fixing with screws is mandatory, with anchors or suitable support selected according to the substrate and connection loads. Fill joints and fixing points, sand with 180-220 grit abrasive, apply the chosen primer system and finish with two coats of paint. Silicone adhesive must not be used.
Compared with plaster, the P5050 is lighter and less prone to breakage during handling; compared with solid wood, its closed-cell composition resists moisture-related decay and offers stable decorative performance. Its surface can be filled, sanded and repainted, allowing future repair or colour changes. The result is a practical fluted pilaster detail for projects that need defined vertical proportion, a paintable finish and a controlled installation process.
- The P5050 fluted pilaster column is suitable for vertical architectural framing in both interior and exterior settings
- In a living room, place it at the edges of a feature wall or use paired pilasters to define a fireplace, media wall or transition between seating zones
- In an entrance hall, two vertical elements can frame a doorway or reinforce the visual axis toward the main interior
- The 240 cm height suits tall wall compositions, while the 50x50 cm footprint gives the profile a substantial presence for larger rooms
- It can also be used in bedrooms as a structured surround for a headboard wall, or in hotel lobbies, office reception areas and restaurants where a clear architectural rhythm is required
- For villa facades and commercial exteriors, the pilaster works as decorative cladding over suitable existing columns or selected wall sections
- Exterior applications require a UV-resistant paint system, with joints and fixing points sealed using exterior-grade filler
- The product is decorative and must not be treated as a structural support
- Prepare a clean, dry and sound substrate before positioning the P5050
- Check the vertical alignment and mark the fixing points
- Where a corner transition is needed, cut the adjoining pieces with a 45-degree mitre for a controlled joint
- Apply polyurethane (PU) mounting adhesive to the rear surface and position the pilaster carefully
- Mechanical fixing with screws is mandatory; choose suitable anchors and support according to the substrate, the product's own weight and the connection loads
- Do not use silicone adhesive
- Fill screw heads and joints with suitable filler, then sand with 180-220 grit abrasive
- Apply the selected primer system and finish with two coats of water-based or synthetic paint
- For exterior projects, use UV-resistant paint and exterior-grade filler at all joints and fixing points
- Clean the P5050 with a soft dry cloth or a lightly damp cloth
- Avoid abrasive cleaners, stiff brushes, solvents and impact from hard tools, as these can mark the painted or primed surface and reduce the quality of the fluted detail
- Inspect exterior installations periodically, especially the paint film, joints and screw points
- If the coating shows wear, repair the affected area with suitable exterior filler where needed, sand carefully and renew the compatible UV-resistant paint system
- The product can be repainted after suitable surface preparation
Can the P5050 fluted pilaster column be used outdoors?
Yes. The P5050 is suitable for exterior decorative applications when installed over an appropriate substrate and finished with a UV-resistant paint system. It can frame villa facades, entrance compositions, commercial buildings and existing columns. The element is decorative rather than structural, so it must not be used to carry building loads. Exterior joints and screw points should be finished with exterior-grade filler, and the coating should be inspected and maintained according to exposure conditions.
How is the P5050 installed and painted?
Install the pilaster on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical screw fixing. Use suitable anchors for the substrate and account for the product's own weight and connection loads. Form corner transitions with a 45-degree mitre where required. Fill joints and screw points, sand with 180-220 grit abrasive, apply the chosen primer system and finish with two coats of paint. Silicone adhesive must not be used.
How durable is it, and what is its weight?
The P5050 is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³, giving it a firm but relatively lightweight construction compared with plaster, concrete or solid wood. An exact product weight is not provided and should not be inferred from the dimensions alone. The material has water absorption below 1%, high dimensional stability and dimensional stability tested between -20 °C and +70 °C. Correct fixing and paint maintenance are essential for long-term performance.
What advantage does it offer over plaster or wood?
The P5050 is easier to handle than plaster and less vulnerable to breakage during normal installation. Unlike solid wood, its closed-cell polyurethane structure is not susceptible to moisture-related decay and is suitable for paintable interior or exterior decorative work when correctly coated. The fluted profile is cast with consistent vertical detail, and the surface can be filled, sanded and repainted. It remains a decorative cladding element and does not replace a structural column.
Can the fluted surface be painted in a custom colour?
Yes. The factory-primed surface is prepared for water-based or synthetic paint, allowing the P5050 to be coordinated with walls, facade elements, trims or existing columns. The paint manufacturer may require its own primer system for warranty coverage, so an additional primer can be selected as an optional step. Polure does not guarantee the compatibility or performance of the chosen paint. For outdoor use, the selected coating must provide UV resistance.