Polyurethane Decoration Material Fluted Pilaster 60x60x240 cm
Technical Specifications
| Material | Polyurethane decorative material |
|---|---|
| Surface | Grooved and decorative surface texture |
| Color | Raw surface, paintable |
| Density | Belirtilmemiştir |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 60 cm |
| Dimensions | 600 × 600 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane Decoration Material P5060 is a fluted pilaster column designed to add vertical architectural definition to interior and exterior spaces. Measuring 60 x 60 x 240 cm, its square format and continuous vertical grooves create a structured surface that can frame entrances, emphasize wall zones or visually organize large elevations. The product is decorative and must not be treated as a load-bearing column.
The pilaster is manufactured from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction combines low weight with a firm surface suitable for architectural detailing. Water absorption is below 1%, while the material offers high dimensional stability. Dimensional stability has been tested at -20 C / +70 C; this test range must not be interpreted as a service temperature or operating temperature rating.
P5060 arrives with a factory primer that prepares the surface for water-based or synthetic paint. The fluted profile produces regular vertical light and shadow lines, allowing the pilaster to complement classical, transitional and contemporary architectural schemes without introducing an unverified ornament. Additional primer application is optional and remains the customer's choice. Paint manufacturers may not provide a warranty for surfaces painted without their own primer systems, and Polure does not provide a warranty for paints used on the product.
In interiors, the 240 cm height suits full-height compositions in entrance halls, living rooms, dining areas, bedrooms, hotel lobbies, restaurants and offices. Use a pair to frame a doorway, place several pilasters across a feature wall or combine them with existing structural columns as decorative cladding. Outdoors, P5060 can be applied to villa entrances, covered terraces and facade elevations when finished with UV-resistant exterior paint. It is decorative only and does not replace a structural column.
For installation, prepare a clean, dry and sound surface, then cut joints with a 45-degree mitre where required. Apply polyurethane (PU) mounting adhesive and secure the pilaster with screws as mandatory mechanical fixing; use suitable anchors where the substrate requires them. Fill joints and screw points with filler, sand with 180-220 grit abrasive paper, apply the selected primer system and finish with two coats of paint. Silicone adhesive is not suitable for this installation method.
Compared with plaster, the polyurethane profile is easier to handle and less prone to breakage during fitting. Compared with timber or MDF, it is resistant to moisture-related decay and does not depend on a natural grain for its appearance. The surface can be filled, sanded, repainted and repaired, supporting practical maintenance throughout future interior or facade refurbishment work.
- P5060 is a full-height fluted pilaster for decorative architectural framing in both interiors and exteriors
- Its 240 cm height works well beside entrance doors, around tall openings and on feature walls where a vertical rhythm is needed
- In a living room, a pair can define a media wall or frame a transition between seating and dining areas
- In a bedroom, pilasters can outline a headboard wall without taking up the depth of a built-in structure
- Hotel lobbies, restaurants and offices can use repeated units to establish a formal wall grid or emphasize reception zones
- For villa facades, place pilasters at entrance bays, beside windows or at covered terrace openings as decorative cladding over a suitable structural background
- The 60 x 60 cm square section gives the product a substantial visual presence, so it is better suited to generous wall areas and entrance compositions than narrow residential niches
- Exterior applications require UV-resistant paint, with joints and screw points sealed using exterior filler
- Check the substrate and installation layout before fitting
- The surface must be clean, dry and sound
- Mark the vertical position of the pilaster and prepare 45-degree mitre cuts where corner or framed junctions require them
- Apply a polyurethane (PU) mounting adhesive to the rear contact areas, then position the pilaster carefully
- Mechanical fixing with screws is mandatory; select suitable anchors for the substrate and provide additional support where the profile size and site conditions require it
- Do not use silicone adhesive
- Fill joints and screw heads with compatible filler, then sand with 180-220 grit abrasive paper
- Apply the chosen primer system if required by the paint manufacturer and finish with two coats of suitable paint
- For exterior work, use UV-resistant paint and exterior-grade filler at joints and fixing points
- Remove dust with a soft, dry cloth or clean the painted surface with a lightly damp cloth
- Avoid abrasive pads, aggressive solvents and harsh cleaning chemicals that may mark the coating or damage the decorative finish
- Inspect exterior applications periodically, especially at joints and screw points, and repair any damaged filler or paint promptly
- Repainting should follow the paint manufacturer's preparation instructions
- The factory primer prepares the polyurethane surface for painting, but any additional primer system remains optional and should be selected according to the chosen paint manufacturer's requirements
Can the P5060 fluted pilaster be used outdoors?
Yes. P5060 is suitable for exterior decorative applications such as villa entrances, facade bays and covered terraces. Use a UV-resistant exterior paint, and seal joints and screw points with exterior filler. The pilaster is a decorative cladding element and is not a structural or load-bearing column. The substrate, fixing method and exposure conditions must be assessed before installation so that the adhesive and mandatory mechanical fixing are selected appropriately.
How is the pilaster installed and painted?
Install the pilaster on a clean, dry surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fixing by screws. Prepare 45-degree mitre cuts where required, fill the joints and screw points, and sand with 180-220 grit abrasive paper. Apply the selected primer system according to the paint manufacturer's instructions, then apply two coats of suitable paint. Silicone adhesive must not be used. Exterior installations require UV-resistant paint and exterior-grade joint filler.
How heavy is P5060 and how long will it last?
An exact product weight is not stated and should not be estimated from the dimensions alone. The rigid closed-cell polyurethane material has a density of 150-220 kg/m³, but the final weight depends on the manufactured profile volume. Service life depends on installation quality, paint system, substrate and exposure. The product can be filled, sanded, repainted and repaired, supporting long-term decorative maintenance when correctly installed and finished.
What are the advantages over plaster or timber?
P5060 is easier to handle than plaster and is less prone to breakage during fitting. Compared with timber or MDF, its closed-cell polyurethane construction offers resistance to moisture-related decay and supports consistent decorative detailing without natural grain variation. The fluted surface is formed as part of the profile, while the factory primer prepares it for painting. As with any decorative element, correct fixing and suitable finishing are essential.
Can the fluted surface be painted in a custom colour?
Yes. P5060 has a paintable, factory-primed surface and can be finished with water-based or synthetic paint in the selected project colour. The regular vertical fluting remains visible after painting and creates a structured light-and-shadow effect. Additional primer is optional, but the paint manufacturer's system should be followed because some manufacturers may not warranty surfaces painted without their own primer. Polure does not provide a warranty for paints used on the product.