15x15x240 cm Polyurethane Decorative Product Pilaster
Technical Specifications
| Material | Poliüretan bazlı dekorasyon ürünü |
|---|---|
| Surface | Bilgi verilmemiştir. |
| Color | Boyanabilir; teslimat rengi belirtilmemiştir. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 15 cm |
| Dimensions | 150 × 150 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5015W is a Polyurethane-based decorative product shaped as a 15 x 15 x 240 cm pilaster column for architectural wall and facade detailing. Its tall, narrow format creates a clear vertical division without requiring a structural column, making it suitable for framing wall sections, entrances and selected facade compositions.
The pilaster is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This material combines low weight with a firm surface that preserves crisp architectural lines. It has water absorption below 1%, high dimensional stability and a working temperature range of -100 °C / +80 °C without form loss under the stated conditions. The product is decorative and does not carry structural loads; any existing structural support must remain independent.
The 240 cm height gives the P5015W a strong vertical presence, while the 15 x 15 cm section is proportioned for wall-mounted applications rather than freestanding construction. Its paintable surface can be coordinated with a room palette, an entrance scheme or an exterior facade. The product arrives with a factory primer that prepares the surface for water-based or synthetic paint. An additional primer may be selected according to the paint manufacturer's system; some manufacturers do not provide a warranty when their own primer is not used. Polure does not guarantee compatibility with selected paints.
Inside, the P5015W can define wall bays in a living room, add vertical structure to an entrance hall or frame feature areas in a hotel lobby, restaurant or office. It can also be used beside openings, at the ends of wall panels or in pairs to create a balanced architectural composition. Outdoors, the pilaster is suitable for decorative facade work when finished with UV-resistant paint. It can contribute to villa entrances, commercial elevations and covered terrace compositions, but it must remain a non-load-bearing surface element.
Installation begins with a clean, dry, sound and sufficiently even substrate. Check measurements before cutting, make 45-degree mitre cuts where corner returns are required, and bond the piece with polyurethane (PU) mounting adhesive. Mechanical fixing with suitable screws is mandatory, with additional support considered for broad or demanding applications. Fill joints and screw points with suitable filler, sand using 180-220 grit paper, apply the selected primer system and finish with two coats of paint. Silicone adhesive should not be used. For exterior work, seal joints and fixing points with exterior-grade filler and use UV-resistant paint.
Compared with plaster, the rigid polyurethane construction is lighter and less prone to breakage during handling. Unlike wood, it resists moisture-related decay and does not depend on a timber surface for its decorative profile. Compared with EPS, it offers a firmer, more detailed finish that can be filled, sanded, repainted and repaired. The P5015W therefore provides a practical way to introduce pilaster detailing while keeping the material specification clear and the installation adaptable.
- The P5015W is designed for vertical wall and facade composition as a decorative pilaster panel column
- In a living room, place one at the edge of a feature wall or use a matching pair to frame a fireplace surround, media wall or transition between finishes
- In an entrance hall, pilasters can define the doorway zone and give a tall wall a clearer architectural rhythm
- Hotel lobbies, restaurants and offices can use the 240 cm height to organise reception backdrops, circulation walls and decorative bays without introducing a structural column
- For bedrooms, the product can frame a headboard wall or separate painted and panelled surfaces
- Outdoors, the pilaster can be applied to villa entrances, terrace elevations and selected facade sections
- Exterior use requires UV-resistant paint, and the element remains decorative rather than load-bearing
- The 15 x 15 cm section suits full-height compositions where a visible vertical profile is required without taking the footprint of a traditional masonry column
- Prepare a clean, dry, sound and even substrate, then check the full 240 cm measurement before cutting
- Where corner returns are needed, use accurate 45-degree mitre cuts and dry-fit the pieces before bonding
- Apply polyurethane (PU) mounting adhesive suitable for decorative polyurethane products; do not use silicone adhesive
- Mechanical fixing with suitable screws is mandatory, and wider or more exposed applications may require additional mechanical support
- Fill joints and screw points with suitable filler, then sand with 180-220 grit paper
- Apply the selected primer system and finish with two coats of water-based or synthetic paint
- The factory primer prepares the surface, while an additional primer remains optional according to the paint manufacturer's requirements
- For exterior installation, close joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the P5015W with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive cleaners, solvents, scouring pads and hard brushes that could mark the painted finish or surface preparation
- If the pilaster is installed outdoors, inspect joints, screw points and painted areas periodically, particularly after severe weather
- Renew exterior filler or paint where deterioration is visible
- Repainting should follow the compatibility requirements of the selected water-based or synthetic paint system
- A new finish may require light preparation and an appropriate primer; the paint manufacturer's instructions should take priority
Can the P5015W pilaster be used on an exterior facade?
Yes. The P5015W is suitable for decorative exterior facade applications when the substrate, fixing method and joint treatment are appropriate. Exterior surfaces must be finished with UV-resistant paint because unpainted polyurethane may yellow under sunlight. Seal joints and screw points with exterior-grade filler. The pilaster is a decorative cladding element and must not be treated as a load-bearing column or used to replace structural support.
How is the polyurethane pilaster installed and painted?
Install the pilaster on a clean, dry and sound surface. Check the 240 cm length, make 45-degree mitre cuts where required, apply polyurethane (PU) mounting adhesive and secure the product with mechanical screws. Fill joints and fixing points, sand with 180-220 grit paper, apply the selected primer system and finish with two coats of water-based or synthetic paint. Silicone adhesive should not be used.
How durable and heavy is the P5015W?
The exact product weight is not specified, so it should not be estimated from the dimensions alone. The rigid, closed-cell polyurethane construction has a density of 150-220 kg/m³, water absorption below 1% and high dimensional stability. It resists moisture-related decay and can be repaired, sanded and repainted. Correct substrate preparation, mechanical fixing, joint sealing and a suitable paint system are essential to long-term performance.
What advantage does polyurethane offer over plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage during handling than plaster. Unlike wood, it resists moisture-related decay and does not support the same rot concerns. Compared with EPS, it provides a firmer surface with better suitability for detailed decorative profiles. The P5015W can also be filled, sanded, painted and repaired, allowing the finish to be renewed when the project requires a different colour or surface treatment.
Can the P5015W be painted in a custom colour?
Yes. The P5015W is paintable and arrives with a factory primer that prepares the surface for water-based or synthetic paint. An additional primer is optional and may be selected when required by the chosen paint manufacturer's system; some paint manufacturers do not guarantee results without their own primer. Apply the recommended preparation and finish with two coats. Polure does not guarantee compatibility with a paint selected by the customer.
Similar Products(Architectural Pilaster Columns)
P5015W is a Polyurethane-based decorative product shaped as a 15 x 15 x 240 cm pilaster column for architectural wall and facade detailing. Its tall, narrow format creates a clear vertical division without requiring a structural column, making it suitable for framing wall sections, entrances and selected facade compositions.
The pilaster is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This material combines low weight with a firm surface that preserves crisp architectural lines. It has water absorption below 1%, high dimensional stability and a working temperature range of -100 °C / +80 °C without form loss under the stated conditions. The product is decorative and does not carry structural loads; any existing structural support must remain independent.
The 240 cm height gives the P5015W a strong vertical presence, while the 15 x 15 cm section is proportioned for wall-mounted applications rather than freestanding construction. Its paintable surface can be coordinated with a room palette, an entrance scheme or an exterior facade. The product arrives with a factory primer that prepares the surface for water-based or synthetic paint. An additional primer may be selected according to the paint manufacturer's system; some manufacturers do not provide a warranty when their own primer is not used. Polure does not guarantee compatibility with selected paints.
Inside, the P5015W can define wall bays in a living room, add vertical structure to an entrance hall or frame feature areas in a hotel lobby, restaurant or office. It can also be used beside openings, at the ends of wall panels or in pairs to create a balanced architectural composition. Outdoors, the pilaster is suitable for decorative facade work when finished with UV-resistant paint. It can contribute to villa entrances, commercial elevations and covered terrace compositions, but it must remain a non-load-bearing surface element.
Installation begins with a clean, dry, sound and sufficiently even substrate. Check measurements before cutting, make 45-degree mitre cuts where corner returns are required, and bond the piece with polyurethane (PU) mounting adhesive. Mechanical fixing with suitable screws is mandatory, with additional support considered for broad or demanding applications. Fill joints and screw points with suitable filler, sand using 180-220 grit paper, apply the selected primer system and finish with two coats of paint. Silicone adhesive should not be used. For exterior work, seal joints and fixing points with exterior-grade filler and use UV-resistant paint.
Compared with plaster, the rigid polyurethane construction is lighter and less prone to breakage during handling. Unlike wood, it resists moisture-related decay and does not depend on a timber surface for its decorative profile. Compared with EPS, it offers a firmer, more detailed finish that can be filled, sanded, repainted and repaired. The P5015W therefore provides a practical way to introduce pilaster detailing while keeping the material specification clear and the installation adaptable.
- The P5015W is designed for vertical wall and facade composition as a decorative pilaster panel column
- In a living room, place one at the edge of a feature wall or use a matching pair to frame a fireplace surround, media wall or transition between finishes
- In an entrance hall, pilasters can define the doorway zone and give a tall wall a clearer architectural rhythm
- Hotel lobbies, restaurants and offices can use the 240 cm height to organise reception backdrops, circulation walls and decorative bays without introducing a structural column
- For bedrooms, the product can frame a headboard wall or separate painted and panelled surfaces
- Outdoors, the pilaster can be applied to villa entrances, terrace elevations and selected facade sections
- Exterior use requires UV-resistant paint, and the element remains decorative rather than load-bearing
- The 15 x 15 cm section suits full-height compositions where a visible vertical profile is required without taking the footprint of a traditional masonry column
- Prepare a clean, dry, sound and even substrate, then check the full 240 cm measurement before cutting
- Where corner returns are needed, use accurate 45-degree mitre cuts and dry-fit the pieces before bonding
- Apply polyurethane (PU) mounting adhesive suitable for decorative polyurethane products; do not use silicone adhesive
- Mechanical fixing with suitable screws is mandatory, and wider or more exposed applications may require additional mechanical support
- Fill joints and screw points with suitable filler, then sand with 180-220 grit paper
- Apply the selected primer system and finish with two coats of water-based or synthetic paint
- The factory primer prepares the surface, while an additional primer remains optional according to the paint manufacturer's requirements
- For exterior installation, close joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the P5015W with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive cleaners, solvents, scouring pads and hard brushes that could mark the painted finish or surface preparation
- If the pilaster is installed outdoors, inspect joints, screw points and painted areas periodically, particularly after severe weather
- Renew exterior filler or paint where deterioration is visible
- Repainting should follow the compatibility requirements of the selected water-based or synthetic paint system
- A new finish may require light preparation and an appropriate primer; the paint manufacturer's instructions should take priority
Can the P5015W pilaster be used on an exterior facade?
Yes. The P5015W is suitable for decorative exterior facade applications when the substrate, fixing method and joint treatment are appropriate. Exterior surfaces must be finished with UV-resistant paint because unpainted polyurethane may yellow under sunlight. Seal joints and screw points with exterior-grade filler. The pilaster is a decorative cladding element and must not be treated as a load-bearing column or used to replace structural support.
How is the polyurethane pilaster installed and painted?
Install the pilaster on a clean, dry and sound surface. Check the 240 cm length, make 45-degree mitre cuts where required, apply polyurethane (PU) mounting adhesive and secure the product with mechanical screws. Fill joints and fixing points, sand with 180-220 grit paper, apply the selected primer system and finish with two coats of water-based or synthetic paint. Silicone adhesive should not be used.
How durable and heavy is the P5015W?
The exact product weight is not specified, so it should not be estimated from the dimensions alone. The rigid, closed-cell polyurethane construction has a density of 150-220 kg/m³, water absorption below 1% and high dimensional stability. It resists moisture-related decay and can be repaired, sanded and repainted. Correct substrate preparation, mechanical fixing, joint sealing and a suitable paint system are essential to long-term performance.
What advantage does polyurethane offer over plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage during handling than plaster. Unlike wood, it resists moisture-related decay and does not support the same rot concerns. Compared with EPS, it provides a firmer surface with better suitability for detailed decorative profiles. The P5015W can also be filled, sanded, painted and repaired, allowing the finish to be renewed when the project requires a different colour or surface treatment.
Can the P5015W be painted in a custom colour?
Yes. The P5015W is paintable and arrives with a factory primer that prepares the surface for water-based or synthetic paint. An additional primer is optional and may be selected when required by the chosen paint manufacturer's system; some paint manufacturers do not guarantee results without their own primer. Apply the recommended preparation and finish with two coats. Polure does not guarantee compatibility with a paint selected by the customer.