Polyurethane Decorative Product Pilaster Column 20x20x240 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey |
| Color | Boyanabilir; uygulama öncesi mevcut renk belirtilmemiştir. |
| Density | 150-220 kg/m³ (production target ~160 kg/m³) |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 20 cm |
| Dimensions | 200 × 200 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane decorative product P5020W is a pilaster column element designed to create a defined architectural frame on walls, entrances and facades. Measuring 20 x 20 x 240 cm, its tall, square-section profile is suited to full-height compositions where a vertical architectural rhythm is required. It is a decorative cladding component and must not be treated as a load-bearing column.
Manufactured from rigid, closed-cell polyurethane, the pilaster has a density of 150-220 kg/m³ and combines low weight with a firm surface suitable for architectural finishing. Its water absorption is below 1%, while the material remains dimensionally stable under normal installation conditions. The stated temperature range is -100 °C / +80 °C. The product is supplied with a factory primer that prepares the surface for water-based or synthetic paint. Additional primer may be selected according to the paint manufacturer's system; Polure does not guarantee paint systems applied without the manufacturer's recommended primer.
The 20 cm square section gives the pilaster a clear visual presence without the mass of masonry, cast stone or solid timber. The available information identifies a decorative, paintable surface rather than a specific ornamental motif, so the profile can be integrated into both restrained contemporary schemes and more traditional architectural layouts through colour selection and surrounding trim. Painted joints and carefully aligned vertical lines help create a coherent finished elevation.
In interiors, P5020W can frame an entrance hall, define a living-room wall, accent a bedroom feature wall or structure a hotel lobby and restaurant composition. It can also be used around non-structural columns, openings and decorative wall panels. Outdoors, the pilaster is suitable for villa facades, porticos, entrance surrounds and other protected or exposed architectural areas when finished with a UV-resistant exterior paint. It may be applied over an existing structural column as decorative cladding, but it does not carry building loads.
Installation begins with a clean, dry, sound and even substrate. Cut adjoining pieces with a 45-degree mitre where a corner or framed transition requires it. Use polyurethane (PU) mounting adhesive, never silicone, and secure the pilaster mechanically with suitable screws and anchors; the product weight and connection loads must be considered. Fill joints and fixing points with suitable filler, sand with 180-220 grit abrasive, apply the selected primer if required by the paint system, and finish with two coats of paint.
Compared with plaster, the rigid polyurethane construction is lighter and less prone to breakage during handling. Unlike solid wood, it is not vulnerable to rot or moisture-related deterioration, while it offers sharper decorative definition than EPS foam. The surface can be filled, sanded, repainted and repaired, supporting long-term maintenance in changing interior or facade schemes.
- P5020W is a full-height pilaster column element for decorative architectural framing
- In a living room, place it beside a media wall, fireplace surround or wide opening to introduce vertical structure without the bulk of masonry
- In an entrance hall, paired pilasters can define a doorway or create a formal transition between spaces
- For bedrooms, the 20 cm square profile works beside a feature wall or behind a headboard composition
- In hotels, offices and restaurants, it can organise reception walls, corridors and dining areas with a consistent vertical cadence
- Outdoors, use the pilaster as decorative cladding over a structural column, around villa entrances, porticos and facade openings
- The product is also suitable for decorative compositions in covered terraces, provided the surface preparation and paint system match the exposure
- For exterior work, apply a UV-resistant paint and seal joints and fixing points with exterior-grade filler
- The 240 cm length suits tall wall and facade zones; where a larger composition is required, alignment and joint treatment should be planned around the actual elevation rather than assumed as a structural connection
- Prepare a clean, dry, firm and reasonably even substrate before placing the pilaster
- Check the vertical setting-out and mark the final position, allowing for the product's own weight and all connection loads
- Cut adjoining elements with a 45-degree mitre where a corner or framed junction requires it
- Apply polyurethane (PU) mounting adhesive to the rear face; silicone must not be used
- Mechanical fixing with suitable screws and anchors is mandatory, with the fixing method selected for the substrate and the section of the pilaster
- Wider or heavily exposed applications may require additional mechanical support
- Fill joints and screw points, sand with 180-220 grit abrasive, and prepare the finish according to the paint manufacturer's system
- Apply the selected primer where required, followed by two coats of water-based or synthetic paint
- For exterior installation, use UV-resistant paint and exterior-grade filler at joints and fixings
- Clean the pilaster with a soft, slightly damp cloth and avoid abrasive pads, aggressive solvents and hard tools that could mark the painted or primed surface
- Do not use high-pressure cleaning directly on joints or fixing points
- Inspect exterior applications periodically for damaged paint, open joints or exposed fasteners
- If the finish needs renewal, repair the affected area, sand lightly, prime when required by the paint system and repaint with a compatible water-based or synthetic coating
- The maintenance interval depends on the selected paint and the level of environmental exposure
Can P5020W be used on an exterior facade?
Yes. P5020W is suitable for interior and exterior decorative applications, including villa facades, entrance surrounds and porticos. It should be installed as non-structural cladding over a suitable substrate, not as a load-bearing column. Exterior work requires a UV-resistant paint, careful joint treatment and exterior-grade filler at seams and fixing points. The substrate, exposure and mechanical fixing method should be assessed before installation.
How is the pilaster installed and painted?
Install P5020W on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fixing. Do not use silicone. Mitre adjoining pieces at 45 degrees where required, then fill joints and screw points. Sand with 180-220 grit abrasive, apply additional primer if required by the paint manufacturer's system, and finish with two coats of water-based or synthetic paint. Exterior applications require UV-resistant paint.
How durable and heavy is the P5020W pilaster?
The rigid, closed-cell polyurethane construction has a density of 150-220 kg/m³, giving the pilaster a firm yet relatively lightweight form compared with plaster, stone or solid timber. Water absorption is below 1%, and the stated temperature range is -100 °C / +80 °C. The product is dimensionally stable, but its own weight and the loads on its fixings must still be considered during installation.
What advantages does polyurethane have over plaster or wood?
Compared with plaster, the pilaster is lighter and less likely to break during handling. Compared with solid wood, it resists rot and moisture-related deterioration. Its rigid surface preserves defined architectural lines and can be filled, sanded, painted and repaired. EPS foam may be lighter, but rigid polyurethane generally provides a firmer surface and more suitable detailing for a finished pilaster application.
Can the 20 x 20 x 240 cm pilaster be painted in a custom colour?
Yes. P5020W has a decorative, paintable surface and is supplied with a factory primer that prepares it for water-based or synthetic paint. The final colour can therefore be selected to suit the wall, facade or surrounding trim. Additional primer is optional according to the paint manufacturer's system and warranty conditions. Polure does not guarantee paint systems applied without the paint manufacturer's recommended primer.
Similar Products(Architectural Pilaster Columns)
Polyurethane decorative product P5020W is a pilaster column element designed to create a defined architectural frame on walls, entrances and facades. Measuring 20 x 20 x 240 cm, its tall, square-section profile is suited to full-height compositions where a vertical architectural rhythm is required. It is a decorative cladding component and must not be treated as a load-bearing column.
Manufactured from rigid, closed-cell polyurethane, the pilaster has a density of 150-220 kg/m³ and combines low weight with a firm surface suitable for architectural finishing. Its water absorption is below 1%, while the material remains dimensionally stable under normal installation conditions. The stated temperature range is -100 °C / +80 °C. The product is supplied with a factory primer that prepares the surface for water-based or synthetic paint. Additional primer may be selected according to the paint manufacturer's system; Polure does not guarantee paint systems applied without the manufacturer's recommended primer.
The 20 cm square section gives the pilaster a clear visual presence without the mass of masonry, cast stone or solid timber. The available information identifies a decorative, paintable surface rather than a specific ornamental motif, so the profile can be integrated into both restrained contemporary schemes and more traditional architectural layouts through colour selection and surrounding trim. Painted joints and carefully aligned vertical lines help create a coherent finished elevation.
In interiors, P5020W can frame an entrance hall, define a living-room wall, accent a bedroom feature wall or structure a hotel lobby and restaurant composition. It can also be used around non-structural columns, openings and decorative wall panels. Outdoors, the pilaster is suitable for villa facades, porticos, entrance surrounds and other protected or exposed architectural areas when finished with a UV-resistant exterior paint. It may be applied over an existing structural column as decorative cladding, but it does not carry building loads.
Installation begins with a clean, dry, sound and even substrate. Cut adjoining pieces with a 45-degree mitre where a corner or framed transition requires it. Use polyurethane (PU) mounting adhesive, never silicone, and secure the pilaster mechanically with suitable screws and anchors; the product weight and connection loads must be considered. Fill joints and fixing points with suitable filler, sand with 180-220 grit abrasive, apply the selected primer if required by the paint system, and finish with two coats of paint.
Compared with plaster, the rigid polyurethane construction is lighter and less prone to breakage during handling. Unlike solid wood, it is not vulnerable to rot or moisture-related deterioration, while it offers sharper decorative definition than EPS foam. The surface can be filled, sanded, repainted and repaired, supporting long-term maintenance in changing interior or facade schemes.
- P5020W is a full-height pilaster column element for decorative architectural framing
- In a living room, place it beside a media wall, fireplace surround or wide opening to introduce vertical structure without the bulk of masonry
- In an entrance hall, paired pilasters can define a doorway or create a formal transition between spaces
- For bedrooms, the 20 cm square profile works beside a feature wall or behind a headboard composition
- In hotels, offices and restaurants, it can organise reception walls, corridors and dining areas with a consistent vertical cadence
- Outdoors, use the pilaster as decorative cladding over a structural column, around villa entrances, porticos and facade openings
- The product is also suitable for decorative compositions in covered terraces, provided the surface preparation and paint system match the exposure
- For exterior work, apply a UV-resistant paint and seal joints and fixing points with exterior-grade filler
- The 240 cm length suits tall wall and facade zones; where a larger composition is required, alignment and joint treatment should be planned around the actual elevation rather than assumed as a structural connection
- Prepare a clean, dry, firm and reasonably even substrate before placing the pilaster
- Check the vertical setting-out and mark the final position, allowing for the product's own weight and all connection loads
- Cut adjoining elements with a 45-degree mitre where a corner or framed junction requires it
- Apply polyurethane (PU) mounting adhesive to the rear face; silicone must not be used
- Mechanical fixing with suitable screws and anchors is mandatory, with the fixing method selected for the substrate and the section of the pilaster
- Wider or heavily exposed applications may require additional mechanical support
- Fill joints and screw points, sand with 180-220 grit abrasive, and prepare the finish according to the paint manufacturer's system
- Apply the selected primer where required, followed by two coats of water-based or synthetic paint
- For exterior installation, use UV-resistant paint and exterior-grade filler at joints and fixings
- Clean the pilaster with a soft, slightly damp cloth and avoid abrasive pads, aggressive solvents and hard tools that could mark the painted or primed surface
- Do not use high-pressure cleaning directly on joints or fixing points
- Inspect exterior applications periodically for damaged paint, open joints or exposed fasteners
- If the finish needs renewal, repair the affected area, sand lightly, prime when required by the paint system and repaint with a compatible water-based or synthetic coating
- The maintenance interval depends on the selected paint and the level of environmental exposure
Can P5020W be used on an exterior facade?
Yes. P5020W is suitable for interior and exterior decorative applications, including villa facades, entrance surrounds and porticos. It should be installed as non-structural cladding over a suitable substrate, not as a load-bearing column. Exterior work requires a UV-resistant paint, careful joint treatment and exterior-grade filler at seams and fixing points. The substrate, exposure and mechanical fixing method should be assessed before installation.
How is the pilaster installed and painted?
Install P5020W on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fixing. Do not use silicone. Mitre adjoining pieces at 45 degrees where required, then fill joints and screw points. Sand with 180-220 grit abrasive, apply additional primer if required by the paint manufacturer's system, and finish with two coats of water-based or synthetic paint. Exterior applications require UV-resistant paint.
How durable and heavy is the P5020W pilaster?
The rigid, closed-cell polyurethane construction has a density of 150-220 kg/m³, giving the pilaster a firm yet relatively lightweight form compared with plaster, stone or solid timber. Water absorption is below 1%, and the stated temperature range is -100 °C / +80 °C. The product is dimensionally stable, but its own weight and the loads on its fixings must still be considered during installation.
What advantages does polyurethane have over plaster or wood?
Compared with plaster, the pilaster is lighter and less likely to break during handling. Compared with solid wood, it resists rot and moisture-related deterioration. Its rigid surface preserves defined architectural lines and can be filled, sanded, painted and repaired. EPS foam may be lighter, but rigid polyurethane generally provides a firmer surface and more suitable detailing for a finished pilaster application.
Can the 20 x 20 x 240 cm pilaster be painted in a custom colour?
Yes. P5020W has a decorative, paintable surface and is supplied with a factory primer that prepares it for water-based or synthetic paint. The final colour can therefore be selected to suit the wall, facade or surrounding trim. Additional primer is optional according to the paint manufacturer's system and warranty conditions. Polure does not guarantee paint systems applied without the paint manufacturer's recommended primer.