10x20x240 cm Polyurethane Decoration Material Pilaster Column
Technical Specifications
| Material | Poliüretan dekorasyon malzemesi. |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey. |
| Color | Boyanabilir yüzey; uygulama öncesi ve sonrası tercih edilen boya rengine göre renklendirilebilir. |
| Density | 150-220 kg/m³ (production target ~160 kg/m³) |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 10 cm |
| Dimensions | 100 × 200 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane decoration material P5020W50 is a vertical pilaster column element designed to give flat wall surfaces the visual structure of a classical architectural column. Measuring 10 x 20 x 240 cm, the profile offers a tall, narrow proportion suited to framing wall sections, entrances and façade compositions without functioning as a load-bearing component.
The rigid polyurethane body has a closed-cell structure and a density of 150-220 kg/m³. This combination provides a lightweight yet firm decorative element with low water absorption below 1%, good dimensional stability and resistance to moisture-related deterioration. The material is suitable for service conditions from -100 °C to +80 °C when correctly installed. Its factory-primed surface accepts water-based and synthetic paints.
The 240 cm height creates a strong vertical line, while the 10 x 20 cm section is practical for wall-mounted pilaster compositions where a deep structural projection is not required. The decorative profile can be painted to coordinate with wall, trim or façade colours. Because the supplied information does not specify a carved motif or capital detail, the product is best described by its clean pilaster format and adaptable paint finish rather than by an unverified ornament style.
P5020W50 can define living-room wall bays, entrance halls, corridors, hotel lobbies, restaurants and office reception areas. In residential interiors, two or more pilasters can visually frame a media wall, fireplace surround or dining zone. On exterior applications, it can be used as a decorative cladding element around entrances, façade panels or existing columns, provided that the surface preparation, fixing method and coating system are appropriate for outdoor exposure. UV-resistant exterior paint is required outdoors because unpainted polyurethane may yellow.
Installation begins with a clean, dry and sound substrate. Check the position, mark the vertical alignment and make any required 45-degree mitre cuts with suitable tools. Apply polyurethane (PU) mounting adhesive; silicone must not be used. Mechanical fixing with screws is mandatory, with suitable anchors selected for the substrate and the product load. Fill joints and fixing points, sand with 180-220 grit abrasive, apply the selected primer where required by the paint system and finish with two coats of paint.
Compared with plaster, the polyurethane profile is lighter and less prone to breakage during handling. Unlike timber, it resists moisture-related decay and insect damage, while offering sharper decorative definition than EPS foam. The element can be filled, sanded, repainted and repaired, allowing the finish to be maintained over time. P5020W50 is therefore a practical architectural surface detail for projects that require a tall pilaster effect in a paint-ready format.
- P5020W50 is intended for decorative pilaster compositions on interior and exterior walls
- In a living room, place pilasters at the sides of a media wall, fireplace surround or recessed panel to establish vertical divisions
- In an entrance hall or corridor, they can frame a doorway or create a more ordered transition between wall sections
- The 10 x 20 cm section suits narrow wall bays and areas where a pronounced projection would reduce circulation space
- In hotel lobbies, restaurants and offices, the 240 cm height can help define reception walls, seating zones or feature panels
- Outdoors, the profile may be applied around villa entrances, façade recesses or existing structural columns as non-load-bearing decorative cladding
- Use a UV-resistant exterior coating for outdoor work
- Align repeated elements carefully, conceal joints with exterior filler where exposed, and coordinate the final paint colour with the surrounding façade or interior trim
- Confirm the layout on the wall before cutting
- The substrate must be clean, dry, stable and free from dust, loose paint or grease
- Position the 10 x 20 x 240 cm pilaster, mark its edges and check the vertical line
- Make required 45-degree mitre cuts with suitable hand or power tools
- Apply polyurethane (PU) mounting adhesive to the rear surface and press the element into position
- Mechanical fixing with screws is mandatory; use suitable anchors according to the substrate and the product loads
- Do not use silicone
- Fill joints and screw points, then sand with 180-220 grit abrasive
- Apply primer if required by the selected paint manufacturer and finish with two coats of compatible water-based or synthetic paint
- For exterior work, seal exposed joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the painted pilaster with a soft, dry or slightly damp cloth
- Avoid abrasive cleaners, hard brushes, solvents and aggressive rubbing that could mark the coating or expose the primer
- Inspect joints, screw points and painted areas periodically, especially on exterior façades
- If cracking or local impact damage appears, remove loose material, refill the area, sand with 180-220 grit abrasive and repaint using a compatible coating system
- Outdoor colour renewal depends on paint quality and UV exposure
- The product is a decorative element, not a waterproofing layer or a structural support
Can the P5020W50 pilaster be used outdoors?
Yes. P5020W50 can be used as non-load-bearing decorative cladding on exterior walls, façades and existing columns when the substrate and fixing method are suitable. Outdoor installation requires a UV-resistant paint because unpainted polyurethane may yellow. Exterior-grade filler should be used at exposed joints and screw points. The element does not replace a structural column and must not be treated as a load-bearing component.
How is the pilaster installed and painted?
Prepare a clean, dry and sound surface, check the vertical position and make any required 45-degree mitre cuts. Fix the profile with polyurethane (PU) mounting adhesive and mandatory mechanical screws using suitable anchors. Silicone must not be used. Fill joints and fixing points, sand with 180-220 grit abrasive, apply any primer required by the selected paint system and finish with two coats of water-based or synthetic paint.
How durable and heavy is this polyurethane pilaster?
The rigid closed-cell polyurethane body has a density of 150-220 kg/m³, low water absorption below 1% and high dimensional stability. The exact unit weight is not stated and should be confirmed from the final product specification and cut configuration. The material is designed for decorative use, not structural loading. With correct fixing, suitable paint and routine inspection of joints, the profile can be maintained, repaired and repainted over time.
What advantages does polyurethane have over plaster or timber?
Polyurethane is lighter and less vulnerable to breakage during handling than plaster. Compared with timber, it resists moisture-related decay and insect damage. Its rigid body preserves defined decorative lines while remaining suitable for cutting, filling, sanding and repainting. The closed-cell structure also supports low water absorption below 1%. As with any decorative cladding, the final performance depends on correct substrate preparation, mechanical fixing and the selected coating system.
Can the P5020W50 be painted in a custom colour?
Yes. The factory-primed surface is prepared to receive water-based or synthetic paint, allowing the pilaster to match interior walls, trim or exterior façades. Always follow the paint manufacturer's preparation and warranty requirements; an additional primer may be used as an option when required by that coating system. Polure does not provide a guarantee for the paint itself. For outdoor projects, select a UV-resistant exterior coating.
Similar Products(Architectural Pilaster Columns)
Polyurethane decoration material P5020W50 is a vertical pilaster column element designed to give flat wall surfaces the visual structure of a classical architectural column. Measuring 10 x 20 x 240 cm, the profile offers a tall, narrow proportion suited to framing wall sections, entrances and façade compositions without functioning as a load-bearing component.
The rigid polyurethane body has a closed-cell structure and a density of 150-220 kg/m³. This combination provides a lightweight yet firm decorative element with low water absorption below 1%, good dimensional stability and resistance to moisture-related deterioration. The material is suitable for service conditions from -100 °C to +80 °C when correctly installed. Its factory-primed surface accepts water-based and synthetic paints.
The 240 cm height creates a strong vertical line, while the 10 x 20 cm section is practical for wall-mounted pilaster compositions where a deep structural projection is not required. The decorative profile can be painted to coordinate with wall, trim or façade colours. Because the supplied information does not specify a carved motif or capital detail, the product is best described by its clean pilaster format and adaptable paint finish rather than by an unverified ornament style.
P5020W50 can define living-room wall bays, entrance halls, corridors, hotel lobbies, restaurants and office reception areas. In residential interiors, two or more pilasters can visually frame a media wall, fireplace surround or dining zone. On exterior applications, it can be used as a decorative cladding element around entrances, façade panels or existing columns, provided that the surface preparation, fixing method and coating system are appropriate for outdoor exposure. UV-resistant exterior paint is required outdoors because unpainted polyurethane may yellow.
Installation begins with a clean, dry and sound substrate. Check the position, mark the vertical alignment and make any required 45-degree mitre cuts with suitable tools. Apply polyurethane (PU) mounting adhesive; silicone must not be used. Mechanical fixing with screws is mandatory, with suitable anchors selected for the substrate and the product load. Fill joints and fixing points, sand with 180-220 grit abrasive, apply the selected primer where required by the paint system and finish with two coats of paint.
Compared with plaster, the polyurethane profile is lighter and less prone to breakage during handling. Unlike timber, it resists moisture-related decay and insect damage, while offering sharper decorative definition than EPS foam. The element can be filled, sanded, repainted and repaired, allowing the finish to be maintained over time. P5020W50 is therefore a practical architectural surface detail for projects that require a tall pilaster effect in a paint-ready format.
- P5020W50 is intended for decorative pilaster compositions on interior and exterior walls
- In a living room, place pilasters at the sides of a media wall, fireplace surround or recessed panel to establish vertical divisions
- In an entrance hall or corridor, they can frame a doorway or create a more ordered transition between wall sections
- The 10 x 20 cm section suits narrow wall bays and areas where a pronounced projection would reduce circulation space
- In hotel lobbies, restaurants and offices, the 240 cm height can help define reception walls, seating zones or feature panels
- Outdoors, the profile may be applied around villa entrances, façade recesses or existing structural columns as non-load-bearing decorative cladding
- Use a UV-resistant exterior coating for outdoor work
- Align repeated elements carefully, conceal joints with exterior filler where exposed, and coordinate the final paint colour with the surrounding façade or interior trim
- Confirm the layout on the wall before cutting
- The substrate must be clean, dry, stable and free from dust, loose paint or grease
- Position the 10 x 20 x 240 cm pilaster, mark its edges and check the vertical line
- Make required 45-degree mitre cuts with suitable hand or power tools
- Apply polyurethane (PU) mounting adhesive to the rear surface and press the element into position
- Mechanical fixing with screws is mandatory; use suitable anchors according to the substrate and the product loads
- Do not use silicone
- Fill joints and screw points, then sand with 180-220 grit abrasive
- Apply primer if required by the selected paint manufacturer and finish with two coats of compatible water-based or synthetic paint
- For exterior work, seal exposed joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the painted pilaster with a soft, dry or slightly damp cloth
- Avoid abrasive cleaners, hard brushes, solvents and aggressive rubbing that could mark the coating or expose the primer
- Inspect joints, screw points and painted areas periodically, especially on exterior façades
- If cracking or local impact damage appears, remove loose material, refill the area, sand with 180-220 grit abrasive and repaint using a compatible coating system
- Outdoor colour renewal depends on paint quality and UV exposure
- The product is a decorative element, not a waterproofing layer or a structural support
Can the P5020W50 pilaster be used outdoors?
Yes. P5020W50 can be used as non-load-bearing decorative cladding on exterior walls, façades and existing columns when the substrate and fixing method are suitable. Outdoor installation requires a UV-resistant paint because unpainted polyurethane may yellow. Exterior-grade filler should be used at exposed joints and screw points. The element does not replace a structural column and must not be treated as a load-bearing component.
How is the pilaster installed and painted?
Prepare a clean, dry and sound surface, check the vertical position and make any required 45-degree mitre cuts. Fix the profile with polyurethane (PU) mounting adhesive and mandatory mechanical screws using suitable anchors. Silicone must not be used. Fill joints and fixing points, sand with 180-220 grit abrasive, apply any primer required by the selected paint system and finish with two coats of water-based or synthetic paint.
How durable and heavy is this polyurethane pilaster?
The rigid closed-cell polyurethane body has a density of 150-220 kg/m³, low water absorption below 1% and high dimensional stability. The exact unit weight is not stated and should be confirmed from the final product specification and cut configuration. The material is designed for decorative use, not structural loading. With correct fixing, suitable paint and routine inspection of joints, the profile can be maintained, repaired and repainted over time.
What advantages does polyurethane have over plaster or timber?
Polyurethane is lighter and less vulnerable to breakage during handling than plaster. Compared with timber, it resists moisture-related decay and insect damage. Its rigid body preserves defined decorative lines while remaining suitable for cutting, filling, sanding and repainting. The closed-cell structure also supports low water absorption below 1%. As with any decorative cladding, the final performance depends on correct substrate preparation, mechanical fixing and the selected coating system.
Can the P5020W50 be painted in a custom colour?
Yes. The factory-primed surface is prepared to receive water-based or synthetic paint, allowing the pilaster to match interior walls, trim or exterior façades. Always follow the paint manufacturer's preparation and warranty requirements; an additional primer may be used as an option when required by that coating system. Polure does not provide a guarantee for the paint itself. For outdoor projects, select a UV-resistant exterior coating.