50x50x240 cm Polyurethane Decoration Product Pilaster Column
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative pilaster surface |
| Color | Paintable surface |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 50 cm |
| Dimensions | 500 × 500 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5050W is a polyurethane decoration product shaped as a full-height pilaster column for architectural wall, entrance and facade detailing. Measuring 50x50x240 cm, its broad rectangular proportion creates a clearly defined vertical element around doors, windows, wall sections or existing columns. The pilaster is decorative rather than structural, but it can be installed as a refined surface finish over a suitable structural background.
The rigid polyurethane body has a closed-cell structure and a density of 150-220 kg/m³. This combination provides a light architectural component with good dimensional stability and resistance to moisture-related deterioration. Water absorption is below 1%, while dimensional stability has been tested between -20 °C and +70 °C. The material has fire class B2 (DIN 4102-1). These properties make the product suitable for carefully prepared interior and exterior applications.
The decorative pilaster surface gives a wall or facade a stronger vertical rhythm without the mass of cast stone, concrete or solid timber. Its 240 cm height is suited to standard-height architectural compositions and can be coordinated with entrance surrounds, window framing and horizontal facade bands. The 50x50 cm section has enough visual presence for spacious halls, villa elevations, hospitality interiors and other areas where a narrow trim would not provide sufficient definition.
Inside, P5050W can frame a principal doorway, articulate a living-room wall, enrich a hotel lobby or form a formal transition between an entrance hall and reception area. It may also be used around existing columns, at the sides of a feature wall or as part of a symmetrical composition in an office or restaurant. Outdoors, the pilaster can be applied to villa facades, covered entrances and window or door zones, provided that the complete coating system includes UV-resistant exterior paint.
Installation begins with a clean, dry and sound substrate. The piece is cut with accurate 45-degree mitre joints where required, bonded with polyurethane (PU) mounting adhesive and secured with mechanical fixings such as suitable screws and anchors. Mechanical fastening is mandatory; silicone must not be used as the mounting adhesive. Joints and fixing points are filled with suitable filler, sanded with 180-220 grit abrasive, primed as selected and finished with two coats of paint. The factory primer prepares the surface for water-based or synthetic paint, while any additional primer remains optional and should follow the paint manufacturer's system.
Compared with plaster, P5050W is lighter and less prone to breakage during handling; compared with timber or MDF, rigid polyurethane offers better resistance to moisture, rot and insect-related deterioration. Unlike EPS, it provides a harder surface suitable for defined decorative profiles and can be filled, sanded, repainted and repaired. Polure does not guarantee the compatibility or performance of third-party paint systems and accepts no responsibility for the selected coating system.
- P5050W is designed for vertical architectural accents in both interior and exterior settings
- In a living room, place matching pilasters on either side of a feature wall, doorway or built-in media area to establish a balanced composition
- In an entrance hall, the 240 cm height can frame a main opening or define the transition between circulation and reception zones
- The 50x50 cm section suits spacious rooms, hotel lobbies, restaurants and offices where a substantial architectural element is required
- Around existing columns, the pilaster can provide a decorative outer finish without being treated as a structural support
- Outdoors, use it on villa facades, covered entrances and around doors or windows, then protect the surface with UV-resistant exterior paint
- Combine it with horizontal string courses or compatible facade trims only where the project design and verified dimensions allow
- Its factory-primed surface can be finished in a colour selected for the surrounding wall, joinery or facade scheme
- Prepare the substrate so it is clean, dry, sound and free from dust, grease or loose material
- Check the 50x50x240 cm piece against the installation area before cutting
- Where corners or returns are required, use accurate 45-degree mitre cuts and dry-fit the joints
- Apply polyurethane (PU) mounting adhesive suitable for the substrate and press the pilaster into position
- Mechanical fixing with suitable screws and anchors is mandatory, especially for a full-height element; use the fixing method appropriate to the wall construction
- Fill joints and screw points with suitable filler, allow the treatment to set according to the product instructions, then sand with 180-220 grit abrasive
- Apply primer if selected for the paint system and finish with two coats of water-based or synthetic paint
- For exterior work, use UV-resistant paint and exterior-grade filler at joints and fixing points
- Do not use silicone as the mounting adhesive
- Clean the painted pilaster with a soft, slightly damp cloth and avoid abrasive pads, aggressive solvents and harsh cleaning chemicals
- Do not scrape the decorative surface with hard tools
- Inspect exterior applications periodically for damage to the paint film, joints or fixing points, particularly after severe weather
- Any repair should be completed with compatible filler and a suitable touch-up coating
- Repainting requirements depend on the selected paint system, exposure conditions and the condition of the finished surface
- Polure does not guarantee third-party paint products, so maintenance materials should be chosen and applied according to their manufacturer's instructions
Can the P5050W pilaster be used outdoors?
Yes. P5050W is suitable for exterior facade decoration as well as interior applications. On an exterior wall, the substrate must be sound and the pilaster must be bonded with polyurethane (PU) mounting adhesive and secured mechanically. Joints and fixing points should be treated with exterior-grade filler. UV-resistant exterior paint is mandatory because unpainted rigid polyurethane may yellow under ultraviolet exposure. The product is decorative and must not be specified as a structural column or load-bearing element.
How is the pilaster installed and painted?
Installation requires a clean, dry and stable surface, accurate 45-degree mitre cutting where needed, polyurethane (PU) mounting adhesive and mandatory mechanical fastening. Silicone must not be used for mounting. After fixing, fill the joints and screw points, then sand with 180-220 grit abrasive. The factory primer prepares the surface for water-based or synthetic paint. Additional primer is optional and should be selected according to the paint manufacturer's system. Apply two coats of paint after the prepared surface is ready.
How durable is it, and what does it weigh?
The rigid polyurethane body has a closed-cell structure, a density of 150-220 kg/m³ and water absorption below 1%. It has high dimensional stability and dimensional stability has been tested between -20 °C and +70 °C. Exact product weight is not stated here and should not be estimated from the external dimensions alone, because the internal profile and production details affect the result. P5050W is a decorative component and must be supported by the specified adhesive and mechanical fixings.
What advantages does polyurethane have over plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage during handling than plaster-based alternatives. Compared with wood or MDF, it offers better resistance to moisture, rot and insect-related deterioration when correctly finished and maintained. Its harder surface also provides a more defined decorative profile than EPS. P5050W can be filled, sanded, painted and repaired, allowing the finished pilaster to be coordinated with an interior wall or exterior facade colour scheme.
Can the P5050W surface be customised with paint?
Yes. P5050W arrives with a factory-primed surface intended to prepare the product for painting. Water-based and synthetic paints may be used when compatible with the complete coating system. An additional primer is optional rather than automatically required; paint manufacturers may decline a warranty when their own primer is not used. For exterior applications, select a UV-resistant paint. Polure does not guarantee third-party paint compatibility or accept responsibility for the chosen coating system.