Polyurethane Decorative Product Pilaster Column 13x25x240 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif yüzey; kesin yüzey deseni belirtilmemiştir. |
| Color | Boyanabilir; mevcut teslim rengi belirtilmemiştir. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 13 cm |
| Dimensions | 125 × 250 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5025W50 is a polyurethane decorative product formed as a pilaster column for adding architectural column definition to walls, entrances and facade compositions. Its vertical format creates the visual effect of a built-in architectural element while remaining a decorative finish rather than a load-bearing component. The pilaster can be installed as a wall-mounted feature or used as cladding over a suitable existing structural column.
The piece measures 13 x 25 x 240 cm, listed as width x depth x height. Its 240 cm height suits full-height interior compositions and many facade applications, while the 13 cm front dimension and 25 cm projection provide a noticeable architectural profile without the mass of a solid stone or concrete element. The rigid, closed-cell polyurethane structure has a density of 150-220 kg/m³, water absorption below 1% and high dimensional stability. It remains suitable across a temperature range of -100 °C to +80 °C under the stated material conditions.
P5025W50 has a decorative surface intended to be finished in the colour required by the project. The product arrives with a factory primer that prepares the surface for water-based or synthetic paint. An additional primer may be selected according to the paint manufacturer's system; many paint manufacturers do not guarantee finishes applied without their own primer. Polure does not guarantee the compatibility or performance of paint systems. The final colour can coordinate the pilaster with wall mouldings, cornices, capitals, plinths or facade bands.
A pilaster column works particularly well on either side of a main entrance, around a reception wall, behind a console in a hallway or as a vertical frame for a fireplace, display niche or hospitality feature. In a living room, two aligned pilasters can define a media wall or transition between architectural zones. In hotels, restaurants and offices, they can reinforce a formal entrance or create rhythm along a long wall. For exterior use, the product may be painted for facade applications, but UV-resistant paint is required. The pilaster remains decorative and must not be treated as structural support.
For installation, prepare a clean, dry and sound surface, then make accurate 45-degree mitre cuts where corner joints are required. Apply polyurethane (PU) mounting adhesive and secure the piece with mechanical fasteners; mechanical fixing is mandatory, with the connection method selected for the substrate and product section. Do not use silicone adhesive. Fill joints and screw points with suitable filler, sand with 180-220 grit abrasive, apply the selected primer if required by the paint system and finish with two coats of paint. Wider or heavily exposed applications require appropriate mechanical support.
Compared with plaster, the pilaster is considerably lighter and less vulnerable to breakage during handling. Unlike solid timber or MDF, rigid polyurethane is not susceptible to rot and offers better resistance to humid conditions. It can be filled, sanded, repainted and repaired, allowing the decorative installation to be maintained as the interior or facade scheme changes.
- P5025W50 is designed for vertical architectural framing in both interior and exterior settings
- In a living room, place matching pilasters on either side of a media unit, fireplace surround or wide opening to give the wall a structured composition
- In an entrance hall, a single pilaster can mark a transition between zones, while a pair can frame a console or doorway
- The 240 cm height is suitable for full-height walls and tall entrance spaces; the 13 x 25 cm section creates a defined profile without the weight of masonry
- Hotels, restaurants and offices can use the pilaster to organise reception walls, corridors and dining areas
- On villa or commercial facades, it can be arranged around entrances, between windows or at selected wall bays
- Exterior applications must be finished with UV-resistant paint
- Since the product is decorative and non-load-bearing, it should be fixed to a suitable wall or structural background rather than used as a supporting column
- Begin with a clean, dry and structurally sound substrate
- Check the 240 cm length against the installation area and plan the position of joints before cutting
- Use accurate 45-degree mitre cuts at corner transitions where needed
- Apply polyurethane (PU) mounting adhesive to the prepared back, then fix the pilaster with mechanical fasteners; mechanical fastening is mandatory and the fixing method must suit the substrate
- Do not use silicone adhesive
- Fill joints and screw points, allow the selected materials to set according to their instructions, then sand with 180-220 grit abrasive
- Apply any additional primer required by the paint manufacturer's system and finish with two coats of suitable water-based or synthetic paint
- Use UV-resistant paint for exterior work
- Remove dust with a soft brush or wipe the surface gently using a soft, slightly damp cloth
- Avoid abrasive cleaners, scouring pads, solvents and hard scraping tools, as these may mark the painted or primed finish
- Inspect joints, corners and mechanical fixing points periodically, especially on exterior installations
- If the surface is repainted, clean it first and follow the chosen paint manufacturer's preparation requirements
- Exterior applications require UV-resistant paint, and exposed joints or screw points should remain properly filled and maintained with suitable exterior filler
Can P5025W50 be used on an exterior facade?
Yes. P5025W50 is suitable for exterior decorative applications when it is fixed to an appropriate substrate and finished with UV-resistant paint. Typical uses include framing villa entrances, organising facade bays and adding vertical definition between windows. The product is a decorative pilaster, not a structural column, so it must not be used to carry building loads. Exterior joints and screw points should be filled with suitable exterior filler, and the paint system should be selected for the exposure conditions.
How is the polyurethane pilaster installed and painted?
Install the pilaster on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fastening. Silicone adhesive should not be used. Cut corner transitions with accurate 45-degree mitres, then fill joints and fixing points. Sand the prepared areas with 180-220 grit abrasive. The factory primer prepares the surface for water-based or synthetic paint, while an additional primer remains optional and should follow the paint manufacturer's system. Apply two paint coats after preparation.
How durable is the pilaster, and what is its weight?
The product is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its material properties include water absorption below 1%, high dimensional stability and a stated temperature range of -100 °C to +80 °C. The exact product weight is not specified, so it should not be estimated from the dimensions alone. Installation must account for the pilaster's own weight, connection loads and the condition of the supporting surface.
What advantages does polyurethane offer over plaster or wood?
Rigid polyurethane provides a lighter alternative to plaster, stone or solid timber while retaining a firm decorative profile. It is less vulnerable to breakage during handling than plaster and is resistant to rot and humid conditions compared with wood-based alternatives. The surface can be filled, sanded, primed and repainted, which supports practical repairs and future colour changes. Like the alternatives, it must still be installed correctly and is intended for decoration rather than structural loading.
Is the P5025W50 pilaster ready to receive paint?
P5025W50 arrives with a factory primer that prepares its decorative surface for painting. It can be finished with suitable water-based or synthetic paint. An additional primer may be used when required by the selected paint manufacturer's system; it should not be described as universally unnecessary. Paint manufacturers may decline to guarantee finishes applied without their own recommended primer, and Polure does not guarantee paint compatibility or performance. For exterior use, UV-resistant paint is required.
Similar Products(Architectural Pilaster Columns)
P5025W50 is a polyurethane decorative product formed as a pilaster column for adding architectural column definition to walls, entrances and facade compositions. Its vertical format creates the visual effect of a built-in architectural element while remaining a decorative finish rather than a load-bearing component. The pilaster can be installed as a wall-mounted feature or used as cladding over a suitable existing structural column.
The piece measures 13 x 25 x 240 cm, listed as width x depth x height. Its 240 cm height suits full-height interior compositions and many facade applications, while the 13 cm front dimension and 25 cm projection provide a noticeable architectural profile without the mass of a solid stone or concrete element. The rigid, closed-cell polyurethane structure has a density of 150-220 kg/m³, water absorption below 1% and high dimensional stability. It remains suitable across a temperature range of -100 °C to +80 °C under the stated material conditions.
P5025W50 has a decorative surface intended to be finished in the colour required by the project. The product arrives with a factory primer that prepares the surface for water-based or synthetic paint. An additional primer may be selected according to the paint manufacturer's system; many paint manufacturers do not guarantee finishes applied without their own primer. Polure does not guarantee the compatibility or performance of paint systems. The final colour can coordinate the pilaster with wall mouldings, cornices, capitals, plinths or facade bands.
A pilaster column works particularly well on either side of a main entrance, around a reception wall, behind a console in a hallway or as a vertical frame for a fireplace, display niche or hospitality feature. In a living room, two aligned pilasters can define a media wall or transition between architectural zones. In hotels, restaurants and offices, they can reinforce a formal entrance or create rhythm along a long wall. For exterior use, the product may be painted for facade applications, but UV-resistant paint is required. The pilaster remains decorative and must not be treated as structural support.
For installation, prepare a clean, dry and sound surface, then make accurate 45-degree mitre cuts where corner joints are required. Apply polyurethane (PU) mounting adhesive and secure the piece with mechanical fasteners; mechanical fixing is mandatory, with the connection method selected for the substrate and product section. Do not use silicone adhesive. Fill joints and screw points with suitable filler, sand with 180-220 grit abrasive, apply the selected primer if required by the paint system and finish with two coats of paint. Wider or heavily exposed applications require appropriate mechanical support.
Compared with plaster, the pilaster is considerably lighter and less vulnerable to breakage during handling. Unlike solid timber or MDF, rigid polyurethane is not susceptible to rot and offers better resistance to humid conditions. It can be filled, sanded, repainted and repaired, allowing the decorative installation to be maintained as the interior or facade scheme changes.
- P5025W50 is designed for vertical architectural framing in both interior and exterior settings
- In a living room, place matching pilasters on either side of a media unit, fireplace surround or wide opening to give the wall a structured composition
- In an entrance hall, a single pilaster can mark a transition between zones, while a pair can frame a console or doorway
- The 240 cm height is suitable for full-height walls and tall entrance spaces; the 13 x 25 cm section creates a defined profile without the weight of masonry
- Hotels, restaurants and offices can use the pilaster to organise reception walls, corridors and dining areas
- On villa or commercial facades, it can be arranged around entrances, between windows or at selected wall bays
- Exterior applications must be finished with UV-resistant paint
- Since the product is decorative and non-load-bearing, it should be fixed to a suitable wall or structural background rather than used as a supporting column
- Begin with a clean, dry and structurally sound substrate
- Check the 240 cm length against the installation area and plan the position of joints before cutting
- Use accurate 45-degree mitre cuts at corner transitions where needed
- Apply polyurethane (PU) mounting adhesive to the prepared back, then fix the pilaster with mechanical fasteners; mechanical fastening is mandatory and the fixing method must suit the substrate
- Do not use silicone adhesive
- Fill joints and screw points, allow the selected materials to set according to their instructions, then sand with 180-220 grit abrasive
- Apply any additional primer required by the paint manufacturer's system and finish with two coats of suitable water-based or synthetic paint
- Use UV-resistant paint for exterior work
- Remove dust with a soft brush or wipe the surface gently using a soft, slightly damp cloth
- Avoid abrasive cleaners, scouring pads, solvents and hard scraping tools, as these may mark the painted or primed finish
- Inspect joints, corners and mechanical fixing points periodically, especially on exterior installations
- If the surface is repainted, clean it first and follow the chosen paint manufacturer's preparation requirements
- Exterior applications require UV-resistant paint, and exposed joints or screw points should remain properly filled and maintained with suitable exterior filler
Can P5025W50 be used on an exterior facade?
Yes. P5025W50 is suitable for exterior decorative applications when it is fixed to an appropriate substrate and finished with UV-resistant paint. Typical uses include framing villa entrances, organising facade bays and adding vertical definition between windows. The product is a decorative pilaster, not a structural column, so it must not be used to carry building loads. Exterior joints and screw points should be filled with suitable exterior filler, and the paint system should be selected for the exposure conditions.
How is the polyurethane pilaster installed and painted?
Install the pilaster on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fastening. Silicone adhesive should not be used. Cut corner transitions with accurate 45-degree mitres, then fill joints and fixing points. Sand the prepared areas with 180-220 grit abrasive. The factory primer prepares the surface for water-based or synthetic paint, while an additional primer remains optional and should follow the paint manufacturer's system. Apply two paint coats after preparation.
How durable is the pilaster, and what is its weight?
The product is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its material properties include water absorption below 1%, high dimensional stability and a stated temperature range of -100 °C to +80 °C. The exact product weight is not specified, so it should not be estimated from the dimensions alone. Installation must account for the pilaster's own weight, connection loads and the condition of the supporting surface.
What advantages does polyurethane offer over plaster or wood?
Rigid polyurethane provides a lighter alternative to plaster, stone or solid timber while retaining a firm decorative profile. It is less vulnerable to breakage during handling than plaster and is resistant to rot and humid conditions compared with wood-based alternatives. The surface can be filled, sanded, primed and repainted, which supports practical repairs and future colour changes. Like the alternatives, it must still be installed correctly and is intended for decoration rather than structural loading.
Is the P5025W50 pilaster ready to receive paint?
P5025W50 arrives with a factory primer that prepares its decorative surface for painting. It can be finished with suitable water-based or synthetic paint. An additional primer may be used when required by the selected paint manufacturer's system; it should not be described as universally unnecessary. Paint manufacturers may decline to guarantee finishes applied without their own recommended primer, and Polure does not guarantee paint compatibility or performance. For exterior use, UV-resistant paint is required.