28x28x46 cm Pilaster Base, Polyurethane Decorative Product
Technical Specifications
| Material | Poliüretan dekorasyon ürünü. |
|---|---|
| Surface | Dekoratif uygulamaya uygun, boyanabilir yüzey. |
| Color | Boyanabilir; uygulama öncesi mevcut ürün rengi belirtilmemiştir. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 28 cm |
| Dimensions | 280 × 280 × 460 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5025B is a polyurethane decorative product designed as the lower base element for pilaster columns and decorative column compositions. Its 28 x 28 x 46 cm format creates a clearly defined transition between the floor or plinth area and the vertical pilaster profile. The square footprint gives the installation a stable visual rhythm, while the 46 cm height is suited to applications where the column base needs to remain an identifiable architectural feature rather than a concealed support.
The component is manufactured from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This structure combines low weight with a firm surface suitable for architectural detailing. Water absorption is below 1%, supporting use in interior spaces and suitable exterior applications when the complete paint system is selected correctly. The material has high dimensional stability, with resistance to shrinkage, expansion and warping under normal service conditions. Its stated temperature range is -100 °C / +80 °C. Polyurethane is difficult to ignite and self-extinguishing when the flame source is removed; it is a decorative element and is not intended to carry structural loads.
The pilaster base has a factory-primed, paint-ready surface that can be finished with water-based or synthetic paint. An additional primer remains optional, not an automatic requirement: paint manufacturers may exclude warranty coverage when their recommended primer system is not used. Polure does not provide a warranty for paints applied to the product and accepts no responsibility for the selected paint system. The square, architectural geometry works well with classical, transitional and contemporary interiors because it establishes a visual foot for the pilaster without dictating a specific colour scheme.
P5025B can be placed at the base of pilasters framing entrance openings, wall recesses, fireplaces or built-in architectural compositions. In a living room, it can define the lower end of a decorative column beside a media wall or passage. In an entrance hall, it can reinforce a pair of pilasters around a doorway. Hotels, restaurants and offices can use the element to give reception areas, corridors and feature walls a more complete architectural proportion. For exterior decoration, it may be used at villa entrances or facade pilasters after application of a UV-resistant exterior paint.
Installation begins with a clean, dry and sound substrate. Where required, the piece is cut with a 45-degree mitre for adjoining decorative sections, then fixed with polyurethane (PU) mounting adhesive. Silicone adhesive must not be used. Mechanical fixing with screws is mandatory, with anchors or dowels selected according to the substrate and installation conditions. Screw heads and joints are filled with exterior-grade filler for outdoor work, followed by 180-220 grit sanding, optional primer and two coats of paint. The product's own weight and connection loads must be considered during fixing.
Compared with plaster, the rigid polyurethane base is lighter and less prone to breakage during handling. Compared with timber or MDF, its closed-cell structure offers better resistance to moisture, rot and insect-related deterioration. Unlike EPS foam, it provides a harder surface and supports sharper architectural definition. With suitable preparation and maintenance, P5025B offers a repairable, repaintable finish for coordinated pilaster installations.
- P5025B is intended for the lower section of pilaster columns and decorative column arrangements
- Its 28 x 28 cm square footprint is suitable for framing vertical architectural elements around doorways, wall recesses and feature panels, while the 46 cm height gives the base a visible role in the overall composition
- In a living room, place it beneath pilasters surrounding a media wall, fireplace surround or wide opening
- In an entrance hall, use matching bases on both sides of a doorway to establish symmetry
- Hotel lobbies, restaurants and offices can use the product at reception backdrops, corridors and decorative wall divisions
- In a bedroom, it can complete pilasters used around a built-in headboard or niche
- For villa entrances and facade pilasters, the product can also be used outdoors after applying a UV-resistant exterior paint
- It is decorative rather than structural, so it must not be treated as a load-bearing column base
- Prepare the substrate so it is clean, dry, sound and free from dust, loose coatings and grease
- Check the position of the pilaster and confirm the 28 x 28 cm footprint before bonding
- Where adjoining decorative sections require it, make a precise 45-degree mitre cut
- Apply polyurethane (PU) mounting adhesive suited to the substrate and press the component into position
- Silicone adhesive must not be used
- Mechanical fixing with screws is mandatory; select suitable anchors or dowels for the wall construction, and provide additional support where the installation design requires it
- Fill screw heads and joints, then sand with 180-220 grit abrasive
- For exterior applications, seal joints and fixing points with exterior-grade filler
- Apply optional primer according to the selected paint manufacturer's system, followed by two coats of water-based or synthetic paint
- Clean the polyurethane pilaster base with a soft, dry cloth or a cloth lightly dampened with water
- Avoid abrasive pads, solvent-heavy cleaners, strong chemicals and aggressive scrubbing, as these may damage the paint film or surface preparation
- Inspect exterior installations periodically, especially around joints and screw points, for cracks, peeling or impact damage
- Repair affected areas with compatible filler, sand the repaired surface and repaint using a suitable UV-resistant exterior coating
- Maintenance requirements depend on the selected paint system and the level of interior or exterior exposure
Can P5025B be used outdoors?
Yes. P5025B is suitable for exterior decorative applications such as villa entrances and facade pilasters, provided that the installation is properly fixed and finished. A UV-resistant exterior paint is mandatory because unpainted polyurethane may yellow under sunlight. Exterior joints and screw points should be sealed with exterior-grade filler. The component is decorative and does not replace a structural column or carry building loads.
How is the pilaster base installed and painted?
Install P5025B on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fixing by screws and suitable anchors or dowels. Do not use silicone adhesive. Fill the joints and fixing points, sand with 180-220 grit abrasive, then apply primer if required by the chosen paint system. Finish with two coats of water-based or synthetic paint. Exterior installations require a UV-resistant coating.
What are the material properties and expected service performance?
P5025B is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Water absorption is below 1%, and the material offers high dimensional stability with resistance to shrinkage, expansion and warping. Its stated temperature range is -100 °C / +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed. Actual service life depends on installation quality, paint selection and exposure conditions.
What advantages does polyurethane offer over plaster or timber?
Rigid polyurethane is lighter and less vulnerable to breakage during handling than plaster. Its closed-cell structure provides better resistance to moisture, rot and insect-related deterioration than timber or MDF. It also offers a harder and more detail-friendly surface than EPS foam. The finish can be filled, sanded, repainted and repaired, making it practical for both coordinated interior schemes and properly protected exterior decoration.
Is the P5025B pilaster base paintable and does it require extra primer?
Yes. The product arrives with a factory-primed surface prepared for painting and can be finished with water-based or synthetic paint. An additional primer is optional rather than universally required. However, paint manufacturers may not provide warranty coverage when their recommended primer is omitted. The selected paint system should therefore be checked before application. Polure does not guarantee applied paint and accepts no responsibility for the chosen coating.
Similar Products(Architectural Pilaster Columns)
P5025B is a polyurethane decorative product designed as the lower base element for pilaster columns and decorative column compositions. Its 28 x 28 x 46 cm format creates a clearly defined transition between the floor or plinth area and the vertical pilaster profile. The square footprint gives the installation a stable visual rhythm, while the 46 cm height is suited to applications where the column base needs to remain an identifiable architectural feature rather than a concealed support.
The component is manufactured from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This structure combines low weight with a firm surface suitable for architectural detailing. Water absorption is below 1%, supporting use in interior spaces and suitable exterior applications when the complete paint system is selected correctly. The material has high dimensional stability, with resistance to shrinkage, expansion and warping under normal service conditions. Its stated temperature range is -100 °C / +80 °C. Polyurethane is difficult to ignite and self-extinguishing when the flame source is removed; it is a decorative element and is not intended to carry structural loads.
The pilaster base has a factory-primed, paint-ready surface that can be finished with water-based or synthetic paint. An additional primer remains optional, not an automatic requirement: paint manufacturers may exclude warranty coverage when their recommended primer system is not used. Polure does not provide a warranty for paints applied to the product and accepts no responsibility for the selected paint system. The square, architectural geometry works well with classical, transitional and contemporary interiors because it establishes a visual foot for the pilaster without dictating a specific colour scheme.
P5025B can be placed at the base of pilasters framing entrance openings, wall recesses, fireplaces or built-in architectural compositions. In a living room, it can define the lower end of a decorative column beside a media wall or passage. In an entrance hall, it can reinforce a pair of pilasters around a doorway. Hotels, restaurants and offices can use the element to give reception areas, corridors and feature walls a more complete architectural proportion. For exterior decoration, it may be used at villa entrances or facade pilasters after application of a UV-resistant exterior paint.
Installation begins with a clean, dry and sound substrate. Where required, the piece is cut with a 45-degree mitre for adjoining decorative sections, then fixed with polyurethane (PU) mounting adhesive. Silicone adhesive must not be used. Mechanical fixing with screws is mandatory, with anchors or dowels selected according to the substrate and installation conditions. Screw heads and joints are filled with exterior-grade filler for outdoor work, followed by 180-220 grit sanding, optional primer and two coats of paint. The product's own weight and connection loads must be considered during fixing.
Compared with plaster, the rigid polyurethane base is lighter and less prone to breakage during handling. Compared with timber or MDF, its closed-cell structure offers better resistance to moisture, rot and insect-related deterioration. Unlike EPS foam, it provides a harder surface and supports sharper architectural definition. With suitable preparation and maintenance, P5025B offers a repairable, repaintable finish for coordinated pilaster installations.
- P5025B is intended for the lower section of pilaster columns and decorative column arrangements
- Its 28 x 28 cm square footprint is suitable for framing vertical architectural elements around doorways, wall recesses and feature panels, while the 46 cm height gives the base a visible role in the overall composition
- In a living room, place it beneath pilasters surrounding a media wall, fireplace surround or wide opening
- In an entrance hall, use matching bases on both sides of a doorway to establish symmetry
- Hotel lobbies, restaurants and offices can use the product at reception backdrops, corridors and decorative wall divisions
- In a bedroom, it can complete pilasters used around a built-in headboard or niche
- For villa entrances and facade pilasters, the product can also be used outdoors after applying a UV-resistant exterior paint
- It is decorative rather than structural, so it must not be treated as a load-bearing column base
- Prepare the substrate so it is clean, dry, sound and free from dust, loose coatings and grease
- Check the position of the pilaster and confirm the 28 x 28 cm footprint before bonding
- Where adjoining decorative sections require it, make a precise 45-degree mitre cut
- Apply polyurethane (PU) mounting adhesive suited to the substrate and press the component into position
- Silicone adhesive must not be used
- Mechanical fixing with screws is mandatory; select suitable anchors or dowels for the wall construction, and provide additional support where the installation design requires it
- Fill screw heads and joints, then sand with 180-220 grit abrasive
- For exterior applications, seal joints and fixing points with exterior-grade filler
- Apply optional primer according to the selected paint manufacturer's system, followed by two coats of water-based or synthetic paint
- Clean the polyurethane pilaster base with a soft, dry cloth or a cloth lightly dampened with water
- Avoid abrasive pads, solvent-heavy cleaners, strong chemicals and aggressive scrubbing, as these may damage the paint film or surface preparation
- Inspect exterior installations periodically, especially around joints and screw points, for cracks, peeling or impact damage
- Repair affected areas with compatible filler, sand the repaired surface and repaint using a suitable UV-resistant exterior coating
- Maintenance requirements depend on the selected paint system and the level of interior or exterior exposure
Can P5025B be used outdoors?
Yes. P5025B is suitable for exterior decorative applications such as villa entrances and facade pilasters, provided that the installation is properly fixed and finished. A UV-resistant exterior paint is mandatory because unpainted polyurethane may yellow under sunlight. Exterior joints and screw points should be sealed with exterior-grade filler. The component is decorative and does not replace a structural column or carry building loads.
How is the pilaster base installed and painted?
Install P5025B on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fixing by screws and suitable anchors or dowels. Do not use silicone adhesive. Fill the joints and fixing points, sand with 180-220 grit abrasive, then apply primer if required by the chosen paint system. Finish with two coats of water-based or synthetic paint. Exterior installations require a UV-resistant coating.
What are the material properties and expected service performance?
P5025B is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Water absorption is below 1%, and the material offers high dimensional stability with resistance to shrinkage, expansion and warping. Its stated temperature range is -100 °C / +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed. Actual service life depends on installation quality, paint selection and exposure conditions.
What advantages does polyurethane offer over plaster or timber?
Rigid polyurethane is lighter and less vulnerable to breakage during handling than plaster. Its closed-cell structure provides better resistance to moisture, rot and insect-related deterioration than timber or MDF. It also offers a harder and more detail-friendly surface than EPS foam. The finish can be filled, sanded, repainted and repaired, making it practical for both coordinated interior schemes and properly protected exterior decoration.
Is the P5025B pilaster base paintable and does it require extra primer?
Yes. The product arrives with a factory-primed surface prepared for painting and can be finished with water-based or synthetic paint. An additional primer is optional rather than universally required. However, paint manufacturers may not provide warranty coverage when their recommended primer is omitted. The selected paint system should therefore be checked before application. Polure does not guarantee applied paint and accepts no responsibility for the chosen coating.