Polyurethane Pilaster Base 22x22x36 cm Decorative Unit
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey |
| Color | Belirtilmemiş |
| Density | 150-220 kg/m³ (production target ~160 kg/m³) |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 22 cm |
| Dimensions | 224 × 224 × 362 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane Pilaster Base P5020B is a decorative lower element designed to complete the foot of a pilaster or column composition. Measuring 22 x 22 x 36 cm in width, depth and height, it creates a defined transition between the vertical architectural element and the floor, plinth or wall surface. Its compact proportions suit both single feature details and repeated pilaster layouts.
The component is manufactured from rigid, closed-cell PU with a density of 150-220 kg/m³. This structure combines a firm, detailed surface with low weight compared with plaster, stone or solid timber. Water absorption remains below 1%, while the material offers high dimensional stability against ordinary shrinkage, expansion and warping. The stated working temperature range is -100 °C / +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed; its fire reaction is classified as B2.
The 22 x 22 cm footprint gives the base a visually grounded proportion without requiring a large floor area. The rectangular body can be coordinated with a pilaster shaft, column surround or framed wall composition. Its decorative surface is supplied with a factory primer that prepares it for water-based or synthetic paint. Additional primer is optional and depends on the selected paint system. Paint manufacturers may not provide a warranty when their own primer is not used, and Polure does not guarantee paint compatibility or accept responsibility for the selected coating system.
Use the P5020B at the lower end of interior pilasters in entrance halls, living rooms, dining areas, hotel lobbies, restaurants and offices. It can also form the base of a decorative column arrangement beside a fireplace surround, doorway or feature wall. For exterior architecture, use it on villa facades, covered entrances and other exposed compositions only after applying a UV-resistant exterior paint. Unpainted material may yellow under ultraviolet exposure. The piece remains decorative and is not a structural or load-bearing component.
Installation begins on a clean, dry, sound and dust-free surface. Cut adjoining profiles with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, position the base accurately and secure it with screws as mandatory mechanical fixing. Where project conditions require it, provide additional support according to the substrate and connection loads. Fill joints and screw points with suitable filler, sand with 180-220 grit paper, apply the selected primer if required by the coating system, and finish with two paint coats. Silicone adhesive must not be used.
Compared with plaster, the rigid PU construction is lighter and less vulnerable to impact breakage; compared with timber, it resists moisture-related decay and insect damage. It can be repaired, filled, sanded and repainted, allowing the pilaster composition to be adapted during refurbishment. Always assess the substrate, adhesive instructions and fixing method together before installation, particularly where the base is exposed to traffic, vibration or outdoor conditions.
- The P5020B is intended for the lower section of decorative pilasters and column compositions
- In a living room, place it beneath a pilaster framing a fireplace, media wall or wide opening to give the vertical profile a clear visual termination
- In an entrance hall, paired bases can define a doorway or connect wall pilasters with a classical interior scheme
- Hotel lobbies, restaurants and offices can use the 22 x 22 cm footprint where a structured architectural detail is needed without taking up excessive floor space
- The 36 cm height is suitable for a compact base zone beneath a taller pilaster shaft, subject to the proportions of the complete design
- Outdoors, the base can be used at villa entrances, covered porches and facade pilasters when finished with UV-resistant exterior paint
- It is a decorative covering element, not a structural support, so it should be fixed to a stable substrate and coordinated with the upper pilaster parts
- Match the paint finish across the base, shaft and surrounding trim for a continuous architectural appearance
- Prepare the substrate so it is clean, dry, firm and free from dust or loose coatings
- Test the position of the 22 x 22 cm base before bonding, checking alignment with the pilaster shaft and adjacent surfaces
- Cut connecting profiles at 45 degrees where a mitred joint is required
- Apply polyurethane (PU) mounting adhesive in accordance with the adhesive manufacturer's instructions, place the component and press it into position
- Mechanical fixing with screws is mandatory; use additional support where the substrate, orientation or connection loads require it
- Fill joints and screw heads with suitable filler, allow the filler to cure according to its instructions, then sand with 180-220 grit paper
- Apply any additional primer required by the selected paint manufacturer and finish with two coats of water-based or synthetic paint
- Do not use silicone adhesive
- Remove dust with a soft cloth or a lightly damp cloth
- Avoid abrasive cleaners, scouring pads, solvents and hard scraping tools that could mark the primed or painted surface
- Check painted exterior installations periodically for coating damage, especially on exposed facade areas
- UV-resistant exterior paint is required outdoors, and any coating renewal should follow the paint manufacturer's system
- Polure does not provide a warranty for the chosen paint or its application, so maintenance decisions should consider the coating product, exposure and local site conditions
Can the P5020B pilaster base be used outdoors?
Yes. The P5020B can be used in exterior pilaster and facade compositions, including villa entrances and covered porches. The component must be securely fixed to a suitable substrate and finished with UV-resistant exterior paint because unpainted PU may yellow under ultraviolet exposure. Seal joints and screw points with exterior-grade filler. The base is decorative rather than structural, so it must not be specified as a load-bearing support.
How is the pilaster base installed and painted?
Work on a clean, dry and stable surface. Position the base, cut adjoining profiles with a 45-degree mitre where necessary, and apply polyurethane (PU) mounting adhesive. Secure the component with screws as mandatory mechanical fixing; add support when project conditions require it. Fill joints and fixings, sand with 180-220 grit paper, then apply the paint manufacturer's primer if required and finish with two coats. Silicone adhesive is not suitable.
How strong and durable is the P5020B, and what does it weigh?
The product is made from rigid, closed-cell PU with a density of 150-220 kg/m³, giving it a firm decorative surface and resistance to ordinary moisture-related deterioration. The exact piece weight is not specified in the product data and should not be estimated. Service life depends on fixing quality, substrate movement, paint system, impact exposure and maintenance. The component is not structural or load-bearing.
What advantages does it have over plaster or timber?
Compared with plaster, the rigid PU base is lighter and less prone to breaking during handling or installation. Compared with timber, it offers better resistance to moisture-related decay and insect damage. Its closed-cell construction supports low water absorption, while the factory-primed surface can be filled, sanded and repainted. These benefits make it practical for decorative pilaster work, provided the fixing and coating system are selected for the actual location.
Is the 22 x 22 x 36 cm size suitable for every pilaster?
No single base size suits every pilaster composition. P5020B measures 22 cm in width, 22 cm in depth and 36 cm in height, so the upper shaft and surrounding trim should be checked against these proportions before ordering. The base works best where the pilaster or column profile can align with its footprint. Confirm the complete arrangement, substrate and connection details before installation, especially for exterior applications.
Similar Products(Architectural Pilaster Columns)
Polyurethane Pilaster Base P5020B is a decorative lower element designed to complete the foot of a pilaster or column composition. Measuring 22 x 22 x 36 cm in width, depth and height, it creates a defined transition between the vertical architectural element and the floor, plinth or wall surface. Its compact proportions suit both single feature details and repeated pilaster layouts.
The component is manufactured from rigid, closed-cell PU with a density of 150-220 kg/m³. This structure combines a firm, detailed surface with low weight compared with plaster, stone or solid timber. Water absorption remains below 1%, while the material offers high dimensional stability against ordinary shrinkage, expansion and warping. The stated working temperature range is -100 °C / +80 °C. The product is difficult to ignite and self-extinguishing when the flame source is removed; its fire reaction is classified as B2.
The 22 x 22 cm footprint gives the base a visually grounded proportion without requiring a large floor area. The rectangular body can be coordinated with a pilaster shaft, column surround or framed wall composition. Its decorative surface is supplied with a factory primer that prepares it for water-based or synthetic paint. Additional primer is optional and depends on the selected paint system. Paint manufacturers may not provide a warranty when their own primer is not used, and Polure does not guarantee paint compatibility or accept responsibility for the selected coating system.
Use the P5020B at the lower end of interior pilasters in entrance halls, living rooms, dining areas, hotel lobbies, restaurants and offices. It can also form the base of a decorative column arrangement beside a fireplace surround, doorway or feature wall. For exterior architecture, use it on villa facades, covered entrances and other exposed compositions only after applying a UV-resistant exterior paint. Unpainted material may yellow under ultraviolet exposure. The piece remains decorative and is not a structural or load-bearing component.
Installation begins on a clean, dry, sound and dust-free surface. Cut adjoining profiles with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, position the base accurately and secure it with screws as mandatory mechanical fixing. Where project conditions require it, provide additional support according to the substrate and connection loads. Fill joints and screw points with suitable filler, sand with 180-220 grit paper, apply the selected primer if required by the coating system, and finish with two paint coats. Silicone adhesive must not be used.
Compared with plaster, the rigid PU construction is lighter and less vulnerable to impact breakage; compared with timber, it resists moisture-related decay and insect damage. It can be repaired, filled, sanded and repainted, allowing the pilaster composition to be adapted during refurbishment. Always assess the substrate, adhesive instructions and fixing method together before installation, particularly where the base is exposed to traffic, vibration or outdoor conditions.
- The P5020B is intended for the lower section of decorative pilasters and column compositions
- In a living room, place it beneath a pilaster framing a fireplace, media wall or wide opening to give the vertical profile a clear visual termination
- In an entrance hall, paired bases can define a doorway or connect wall pilasters with a classical interior scheme
- Hotel lobbies, restaurants and offices can use the 22 x 22 cm footprint where a structured architectural detail is needed without taking up excessive floor space
- The 36 cm height is suitable for a compact base zone beneath a taller pilaster shaft, subject to the proportions of the complete design
- Outdoors, the base can be used at villa entrances, covered porches and facade pilasters when finished with UV-resistant exterior paint
- It is a decorative covering element, not a structural support, so it should be fixed to a stable substrate and coordinated with the upper pilaster parts
- Match the paint finish across the base, shaft and surrounding trim for a continuous architectural appearance
- Prepare the substrate so it is clean, dry, firm and free from dust or loose coatings
- Test the position of the 22 x 22 cm base before bonding, checking alignment with the pilaster shaft and adjacent surfaces
- Cut connecting profiles at 45 degrees where a mitred joint is required
- Apply polyurethane (PU) mounting adhesive in accordance with the adhesive manufacturer's instructions, place the component and press it into position
- Mechanical fixing with screws is mandatory; use additional support where the substrate, orientation or connection loads require it
- Fill joints and screw heads with suitable filler, allow the filler to cure according to its instructions, then sand with 180-220 grit paper
- Apply any additional primer required by the selected paint manufacturer and finish with two coats of water-based or synthetic paint
- Do not use silicone adhesive
- Remove dust with a soft cloth or a lightly damp cloth
- Avoid abrasive cleaners, scouring pads, solvents and hard scraping tools that could mark the primed or painted surface
- Check painted exterior installations periodically for coating damage, especially on exposed facade areas
- UV-resistant exterior paint is required outdoors, and any coating renewal should follow the paint manufacturer's system
- Polure does not provide a warranty for the chosen paint or its application, so maintenance decisions should consider the coating product, exposure and local site conditions
Can the P5020B pilaster base be used outdoors?
Yes. The P5020B can be used in exterior pilaster and facade compositions, including villa entrances and covered porches. The component must be securely fixed to a suitable substrate and finished with UV-resistant exterior paint because unpainted PU may yellow under ultraviolet exposure. Seal joints and screw points with exterior-grade filler. The base is decorative rather than structural, so it must not be specified as a load-bearing support.
How is the pilaster base installed and painted?
Work on a clean, dry and stable surface. Position the base, cut adjoining profiles with a 45-degree mitre where necessary, and apply polyurethane (PU) mounting adhesive. Secure the component with screws as mandatory mechanical fixing; add support when project conditions require it. Fill joints and fixings, sand with 180-220 grit paper, then apply the paint manufacturer's primer if required and finish with two coats. Silicone adhesive is not suitable.
How strong and durable is the P5020B, and what does it weigh?
The product is made from rigid, closed-cell PU with a density of 150-220 kg/m³, giving it a firm decorative surface and resistance to ordinary moisture-related deterioration. The exact piece weight is not specified in the product data and should not be estimated. Service life depends on fixing quality, substrate movement, paint system, impact exposure and maintenance. The component is not structural or load-bearing.
What advantages does it have over plaster or timber?
Compared with plaster, the rigid PU base is lighter and less prone to breaking during handling or installation. Compared with timber, it offers better resistance to moisture-related decay and insect damage. Its closed-cell construction supports low water absorption, while the factory-primed surface can be filled, sanded and repainted. These benefits make it practical for decorative pilaster work, provided the fixing and coating system are selected for the actual location.
Is the 22 x 22 x 36 cm size suitable for every pilaster?
No single base size suits every pilaster composition. P5020B measures 22 cm in width, 22 cm in depth and 36 cm in height, so the upper shaft and surrounding trim should be checked against these proportions before ordering. The base works best where the pilaster or column profile can align with its footprint. Confirm the complete arrangement, substrate and connection details before installation, especially for exterior applications.