Polyurethane Decorative Pilaster Base 17x34x56 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Yüzey dokusu belirtilmemiştir. |
| Color | Renk bilgisi belirtilmemiştir; boyanabilir. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 17 cm |
| Dimensions | 169 × 337 × 555 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane Decorative Pilaster Base P5030B50 is a lower architectural element designed to complete pilaster applications with a defined transition between the vertical pilaster and the floor or supporting surface. Measuring 17 x 34 x 56 cm in width, depth and height, this decorative base is suited to projects where a substantial lower section is required without introducing the weight of cast stone, solid wood or plaster.
Manufactured from rigid, closed-cell polyurethane, the component has a density of 150-220 kg/m³ and combines low weight with the firm structure required for architectural detailing. Its water absorption is below 1%, while the material remains dimensionally stable under normal application conditions. The stated operating range is -100 °C / +80 °C. The material is difficult to ignite and self-extinguishes when the flame source is removed; its general fire reaction is classified as B2. These properties support use in both interior and exterior decorative projects, subject to the specified coating system.
The pilaster base arrives with a factory primer that prepares the surface for painting. It can be finished with water-based or synthetic paint, allowing the base to follow the colour scheme of a hallway, facade, hotel interior or commercial entrance. An additional primer coat is optional rather than automatically unnecessary. Paint manufacturers may decline warranty coverage when their own primer system is not used, so the final preparation should be selected with the paint supplier. Polure does not provide a warranty for paints applied to the product and accepts no responsibility for the chosen coating system.
P5030B50 is suitable beneath pilasters at entrance portals, reception areas, corridors, living rooms, stair halls and feature walls. On exterior elevations, it can frame pilasters around villa entrances, garden-facing doorways or formal facade compositions. The piece is decorative and non-load-bearing: it may be installed over an existing structural column or architectural surface, but it must not be treated as a structural support. Its 17 x 34 cm footprint provides a visually grounded base for pilaster designs while the 56 cm height creates a clearly readable lower zone.
For installation, prepare a clean, dry, sound and even surface. Make any required 45-degree mitre cuts accurately, apply polyurethane (PU) mounting adhesive, and secure the component with mechanical screws as required; screws are mandatory for reliable fixing. Silicone adhesive must not be used. Seal joints and screw points with suitable filler, sand with 180-220 grit abrasive, apply the selected primer system where required, and finish with two paint coats. Exterior applications require UV-resistant paint, with joints and fixing points protected using exterior-grade filler.
Compared with plaster, the polyurethane decorative product is lighter and less prone to breakage during handling. Unlike wood, it is resistant to moisture-related decay and does not provide a food source for insects. Its closed-cell structure also supports easy filling, sanding, repainting and local repair, making P5030B50 a practical architectural finishing component for detailed pilaster work.
- P5030B50 is designed for the lower section of pilaster compositions in residential, hospitality and commercial architecture
- In a living room, it can ground pilasters used to frame a fireplace wall, media wall or wide opening
- In an entrance hall, the 56 cm height creates a clear base zone beneath a vertical pilaster while keeping the composition suitable for standard interior detailing
- Hotels, restaurants and offices can use the base around reception backdrops, corridors, formal door surrounds and feature walls
- On a villa facade, it can complete pilasters at the main entrance, terrace doors or garden-facing openings
- Exterior use requires a UV-resistant paint system and carefully sealed joints
- The piece is decorative rather than structural, so it should be applied over a sound existing surface or structural column
- Its 17 x 34 cm footprint should be checked against the pilaster width, wall returns and adjacent skirting before ordering
- Coordinate the final colour with the surrounding wall, trim and column finish for a coherent architectural composition
- Ensure that the substrate is clean, dry, sound and sufficiently even before positioning the pilaster base
- Mark the installation line and check the 17 x 34 cm footprint against the surrounding pilaster and floor detail
- Where angled joints are required, make accurate 45-degree mitre cuts
- Apply polyurethane (PU) mounting adhesive to the rear contact areas, position the component, and secure it with mechanical screws; mechanical fixing is mandatory
- Do not use silicone adhesive
- Fill joints and screw heads, allow the selected products to cure according to their instructions, then sand with 180-220 grit abrasive
- Apply an additional primer only if required by the chosen paint system, followed by two coats of water-based or synthetic paint
- For exterior work, use UV-resistant paint and exterior-grade filler at joints and fixing points
- Remove dust with a soft, dry cloth or clean the painted surface with a lightly damp cloth
- Avoid abrasive pads, aggressive solvents and hard scraping tools that could mark the coating or damage filled joints
- Inspect exterior applications periodically, particularly around seams and screw points, for coating wear or cracking
- If maintenance painting is required, use a compatible preparation and coating system
- The factory primer prepares the surface, but the paint manufacturer's primer and application requirements should take priority
- Polure does not guarantee independently selected paint systems
Can P5030B50 be used on an exterior facade?
Yes. P5030B50 is suitable for exterior decorative pilaster applications when the substrate, adhesive and fixing method are appropriate. The finish must use UV-resistant paint because unpainted polyurethane may yellow under sunlight. Exterior joints and screw points should be sealed with exterior-grade filler. The component is non-load-bearing and must be installed as a decorative covering over a sound surface or existing structural element, not as a column that supports building loads.
How is the pilaster base installed and painted?
Prepare a clean, dry and even surface, then check the position and make any required 45-degree mitre cuts. Fix the base with polyurethane (PU) mounting adhesive and mandatory mechanical screws. Silicone adhesive is not suitable. Fill the joints and screw heads, sand with 180-220 grit abrasive, and apply the primer system required by the selected paint manufacturer. Finish with two coats of water-based or synthetic paint. Exterior work requires UV-resistant paint and exterior-grade filler.
How durable is the polyurethane pilaster base?
The rigid, closed-cell polyurethane used for P5030B50 has a density of 150-220 kg/m³, water absorption below 1% and high dimensional stability. Its stated temperature range is -100 °C / +80 °C. It is difficult to ignite and self-extinguishes when the flame source is removed, with a B2 fire reaction classification. Actual service life also depends on correct fixing, joint treatment, paint selection and exposure conditions. The individual product weight is not specified in the supplied data.
What advantages does it offer over plaster or wood?
Compared with plaster, the polyurethane decorative product is lighter and less likely to break during handling or installation. Compared with wood, it resists moisture-related decay and is not affected by insect feeding in the same way. The closed-cell material can be filled, sanded and repainted, supporting local repair. It also preserves detailed moulded geometry without the mass associated with plaster, stone or solid timber. It remains a decorative element and does not replace a structural column.
Can the P5030B50 pilaster base be repainted?
Yes. The factory-primed surface is prepared for water-based or synthetic paint and can be adapted to the surrounding architectural colour scheme. An extra primer coat is optional, but it may be required by the chosen paint manufacturer. Some paint manufacturers do not provide warranty coverage when their own primer system is omitted. For exterior applications, select a UV-resistant coating. Polure does not guarantee the performance of independently selected paint products.
Similar Products(Architectural Pilaster Columns)
Polyurethane Decorative Pilaster Base P5030B50 is a lower architectural element designed to complete pilaster applications with a defined transition between the vertical pilaster and the floor or supporting surface. Measuring 17 x 34 x 56 cm in width, depth and height, this decorative base is suited to projects where a substantial lower section is required without introducing the weight of cast stone, solid wood or plaster.
Manufactured from rigid, closed-cell polyurethane, the component has a density of 150-220 kg/m³ and combines low weight with the firm structure required for architectural detailing. Its water absorption is below 1%, while the material remains dimensionally stable under normal application conditions. The stated operating range is -100 °C / +80 °C. The material is difficult to ignite and self-extinguishes when the flame source is removed; its general fire reaction is classified as B2. These properties support use in both interior and exterior decorative projects, subject to the specified coating system.
The pilaster base arrives with a factory primer that prepares the surface for painting. It can be finished with water-based or synthetic paint, allowing the base to follow the colour scheme of a hallway, facade, hotel interior or commercial entrance. An additional primer coat is optional rather than automatically unnecessary. Paint manufacturers may decline warranty coverage when their own primer system is not used, so the final preparation should be selected with the paint supplier. Polure does not provide a warranty for paints applied to the product and accepts no responsibility for the chosen coating system.
P5030B50 is suitable beneath pilasters at entrance portals, reception areas, corridors, living rooms, stair halls and feature walls. On exterior elevations, it can frame pilasters around villa entrances, garden-facing doorways or formal facade compositions. The piece is decorative and non-load-bearing: it may be installed over an existing structural column or architectural surface, but it must not be treated as a structural support. Its 17 x 34 cm footprint provides a visually grounded base for pilaster designs while the 56 cm height creates a clearly readable lower zone.
For installation, prepare a clean, dry, sound and even surface. Make any required 45-degree mitre cuts accurately, apply polyurethane (PU) mounting adhesive, and secure the component with mechanical screws as required; screws are mandatory for reliable fixing. Silicone adhesive must not be used. Seal joints and screw points with suitable filler, sand with 180-220 grit abrasive, apply the selected primer system where required, and finish with two paint coats. Exterior applications require UV-resistant paint, with joints and fixing points protected using exterior-grade filler.
Compared with plaster, the polyurethane decorative product is lighter and less prone to breakage during handling. Unlike wood, it is resistant to moisture-related decay and does not provide a food source for insects. Its closed-cell structure also supports easy filling, sanding, repainting and local repair, making P5030B50 a practical architectural finishing component for detailed pilaster work.
- P5030B50 is designed for the lower section of pilaster compositions in residential, hospitality and commercial architecture
- In a living room, it can ground pilasters used to frame a fireplace wall, media wall or wide opening
- In an entrance hall, the 56 cm height creates a clear base zone beneath a vertical pilaster while keeping the composition suitable for standard interior detailing
- Hotels, restaurants and offices can use the base around reception backdrops, corridors, formal door surrounds and feature walls
- On a villa facade, it can complete pilasters at the main entrance, terrace doors or garden-facing openings
- Exterior use requires a UV-resistant paint system and carefully sealed joints
- The piece is decorative rather than structural, so it should be applied over a sound existing surface or structural column
- Its 17 x 34 cm footprint should be checked against the pilaster width, wall returns and adjacent skirting before ordering
- Coordinate the final colour with the surrounding wall, trim and column finish for a coherent architectural composition
- Ensure that the substrate is clean, dry, sound and sufficiently even before positioning the pilaster base
- Mark the installation line and check the 17 x 34 cm footprint against the surrounding pilaster and floor detail
- Where angled joints are required, make accurate 45-degree mitre cuts
- Apply polyurethane (PU) mounting adhesive to the rear contact areas, position the component, and secure it with mechanical screws; mechanical fixing is mandatory
- Do not use silicone adhesive
- Fill joints and screw heads, allow the selected products to cure according to their instructions, then sand with 180-220 grit abrasive
- Apply an additional primer only if required by the chosen paint system, followed by two coats of water-based or synthetic paint
- For exterior work, use UV-resistant paint and exterior-grade filler at joints and fixing points
- Remove dust with a soft, dry cloth or clean the painted surface with a lightly damp cloth
- Avoid abrasive pads, aggressive solvents and hard scraping tools that could mark the coating or damage filled joints
- Inspect exterior applications periodically, particularly around seams and screw points, for coating wear or cracking
- If maintenance painting is required, use a compatible preparation and coating system
- The factory primer prepares the surface, but the paint manufacturer's primer and application requirements should take priority
- Polure does not guarantee independently selected paint systems
Can P5030B50 be used on an exterior facade?
Yes. P5030B50 is suitable for exterior decorative pilaster applications when the substrate, adhesive and fixing method are appropriate. The finish must use UV-resistant paint because unpainted polyurethane may yellow under sunlight. Exterior joints and screw points should be sealed with exterior-grade filler. The component is non-load-bearing and must be installed as a decorative covering over a sound surface or existing structural element, not as a column that supports building loads.
How is the pilaster base installed and painted?
Prepare a clean, dry and even surface, then check the position and make any required 45-degree mitre cuts. Fix the base with polyurethane (PU) mounting adhesive and mandatory mechanical screws. Silicone adhesive is not suitable. Fill the joints and screw heads, sand with 180-220 grit abrasive, and apply the primer system required by the selected paint manufacturer. Finish with two coats of water-based or synthetic paint. Exterior work requires UV-resistant paint and exterior-grade filler.
How durable is the polyurethane pilaster base?
The rigid, closed-cell polyurethane used for P5030B50 has a density of 150-220 kg/m³, water absorption below 1% and high dimensional stability. Its stated temperature range is -100 °C / +80 °C. It is difficult to ignite and self-extinguishes when the flame source is removed, with a B2 fire reaction classification. Actual service life also depends on correct fixing, joint treatment, paint selection and exposure conditions. The individual product weight is not specified in the supplied data.
What advantages does it offer over plaster or wood?
Compared with plaster, the polyurethane decorative product is lighter and less likely to break during handling or installation. Compared with wood, it resists moisture-related decay and is not affected by insect feeding in the same way. The closed-cell material can be filled, sanded and repainted, supporting local repair. It also preserves detailed moulded geometry without the mass associated with plaster, stone or solid timber. It remains a decorative element and does not replace a structural column.
Can the P5030B50 pilaster base be repainted?
Yes. The factory-primed surface is prepared for water-based or synthetic paint and can be adapted to the surrounding architectural colour scheme. An extra primer coat is optional, but it may be required by the chosen paint manufacturer. Some paint manufacturers do not provide warranty coverage when their own primer system is omitted. For exterior applications, select a UV-resistant coating. Polure does not guarantee the performance of independently selected paint products.