Polyurethane Decorative Material Pilaster Column Base 33x66x109 cm
Technical Specifications
| Material | Poliüretan dekorasyon malzemesi |
|---|---|
| Surface | Dekoratif sütun kaidesi formunda boyanabilir yüzey |
| Color | Belirtilmemiş |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 33 cm |
| Dimensions | 329 × 657 × 1090 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5060B50 is a polyurethane decorative material pilaster column base designed to complete the lower section of a pilaster composition in interior and exterior architectural detailing. Its substantial 33 x 66 x 109 cm format creates a clearly defined base for decorative columns while allowing the upper pilaster element to be visually grounded against a wall, entrance surround or facade composition. The product is decorative and must not be used as a structural or load-bearing column.
The base is manufactured from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction provides a practical balance of low weight, crisp moulded form and resistance to moisture-related deterioration. Water absorption is below 1%, while the material offers high dimensional stability. Dimensional stability has been tested across -20 °C / +70 °C; this test range should not be interpreted as a service-temperature rating. The supplied surface includes a factory primer that prepares the profile for a compatible paint system.
The lower-base silhouette gives a pilaster a more complete architectural reading than a plain vertical profile alone. Its large footprint suits entrance portals, tall wall compositions and facade layouts where the base needs visible scale. The product is supplied as a paintable decorative surface, so the final colour can be coordinated with the wall, trim or wider architectural palette. Water-based and synthetic paints may be selected according to the paint manufacturer's system requirements.
P5060B50 can be used at the foot of decorative pilasters in entrance halls, living rooms, stair landings, hotel lobbies, restaurants and office reception areas. For exterior applications, it can frame a villa entrance, reinforce the visual composition of a facade or finish pilasters beside doors and windows. The base is decorative rather than structural; any existing concrete, masonry or steel support remains responsible for building loads. Exterior paint must provide UV resistance, and joints and fixing points should be sealed with an exterior-grade filler.
Installation requires a clean, dry and suitably prepared substrate. Cut adjoining profiles with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, and secure the component with mechanical fixings such as screws and suitable plugs. Mechanical support is essential because the product has its own weight and connection loads. After filling, sand with 180-220 grit abrasive, apply any optional additional primer required by the selected paint system, and finish with two coats of paint. Compared with plaster, the polyurethane decorative material is lighter and less prone to breakage; compared with wood or MDF, it does not rot and offers better resistance to moisture, while retaining fine moulded definition. The product is made to order and supplied ex works; the listed price refers to the product only.
- P5060B50 is intended for the lower section of decorative pilaster compositions, giving vertical wall elements a grounded architectural finish
- In a living room, it can anchor pilasters around a fireplace wall, media wall or formal doorway
- In an entrance hall, use matching bases on both sides of a portal to establish a balanced frame without presenting the column as structural
- Hotel lobbies, restaurant entrances and office reception areas can use the base to define circulation zones and add visual weight to tall wall treatments
- For residential projects, it suits villa entrances, stair landings and feature walls
- On facades, the product can finish pilasters beside doors, windows or covered porches when coated with UV-resistant exterior paint
- The 33 x 66 cm footprint and 109 cm height make it appropriate for compositions with a pronounced lower zone rather than narrow trim-only detailing
- Coordinate the final paint colour with the facade render, wall finish or adjacent architectural profiles
- Use exterior filler at joints and screw points so the completed installation presents a continuous, maintained surface
- Check the substrate and ensure it is clean, dry, sound and free from dust or loose coatings
- Plan the pilaster layout before fixing the base, allowing for the product's own weight and connection loads
- Where adjoining profiles meet, make accurate 45-degree mitre cuts with the correct cutting equipment
- Apply polyurethane (PU) mounting adhesive to the approved contact areas, then position the base carefully and press it into alignment
- Mechanical fixing with screws and suitable plugs is mandatory; use additional support where the profile width, substrate or project conditions require it
- Do not use silicone adhesive
- Fill joints, screw heads and minor surface transitions with a compatible filler
- Once cured according to the selected system, sand with 180-220 grit abrasive, apply an optional additional primer if required by the paint manufacturer, and finish with two paint coats
- Exterior installations require UV-resistant paint and exterior-grade joint filler
- Remove dust with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive pads, aggressive solvents and cleaning tools that could mark the painted surface or expose the factory-primed layer
- For painted applications, follow the maintenance instructions of the chosen paint manufacturer, particularly for exterior exposure
- Inspect exterior joints, screw points and painted areas periodically; renew exterior filler or coating if cracking, impact damage or local deterioration becomes visible
- Additional primer and paint system decisions remain the responsibility of the applicator and paint manufacturer, and Polure does not provide a guarantee for the selected paint system
Can the P5060B50 pilaster base be used outdoors?
Yes. P5060B50 is suitable for exterior decorative applications when installed on an appropriate substrate and finished with UV-resistant exterior paint. It can be used at villa entrances, facade pilasters, covered porches and architectural door surrounds. The component is decorative and does not carry structural loads. Exterior joints and screw points should be sealed with exterior-grade filler, and the complete paint system must be selected and applied according to the paint manufacturer's instructions.
How is the pilaster column base installed and painted?
Prepare a clean, dry substrate, check the layout and make 45-degree mitre cuts where adjoining profiles require them. Apply polyurethane (PU) mounting adhesive and secure the base with screws and suitable plugs; mechanical fixing is mandatory. Fill joints and fixing points, then sand with 180-220 grit abrasive. The factory primer prepares the surface for painting, but an additional primer may be applied if required by the chosen paint manufacturer. Finish with two compatible coats of paint.
What are the size and material specifications of this pilaster base?
The P5060B50 measures 33 x 66 x 109 cm, listed as width x depth x height. It is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Water absorption is below 1%, and the material has high dimensional stability. Dimensional stability has been tested at -20 °C / +70 °C; this is a test range, not a declared service-temperature rating. The product has its own weight and must be mechanically secured.
What advantages does polyurethane offer compared with plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage than plaster, which can simplify handling during decorative installation. Its closed-cell structure has water absorption below 1% and resists moisture-related deterioration, while the moulded surface preserves defined architectural forms. Compared with wood or MDF, it does not rot and is less affected by ordinary humidity exposure. Like other decorative profiles, it still requires correct substrate preparation, fixing, joint treatment and a suitable protective paint system.
Can the P5060B50 be repainted to match a project?
Yes. The supplied factory-primed surface is intended to prepare the pilaster base for a compatible paint finish. Water-based and synthetic paints may be used when approved by the paint manufacturer. The final colour can be coordinated with interior walls, facade render or adjacent architectural elements. An additional primer is optional and depends on the selected paint system; paint manufacturers may not guarantee surfaces coated without their specified primer. Polure does not guarantee the selected paint system or accept responsibility for its performance.
Similar Products(Architectural Pilaster Columns)
P5060B50 is a polyurethane decorative material pilaster column base designed to complete the lower section of a pilaster composition in interior and exterior architectural detailing. Its substantial 33 x 66 x 109 cm format creates a clearly defined base for decorative columns while allowing the upper pilaster element to be visually grounded against a wall, entrance surround or facade composition. The product is decorative and must not be used as a structural or load-bearing column.
The base is manufactured from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction provides a practical balance of low weight, crisp moulded form and resistance to moisture-related deterioration. Water absorption is below 1%, while the material offers high dimensional stability. Dimensional stability has been tested across -20 °C / +70 °C; this test range should not be interpreted as a service-temperature rating. The supplied surface includes a factory primer that prepares the profile for a compatible paint system.
The lower-base silhouette gives a pilaster a more complete architectural reading than a plain vertical profile alone. Its large footprint suits entrance portals, tall wall compositions and facade layouts where the base needs visible scale. The product is supplied as a paintable decorative surface, so the final colour can be coordinated with the wall, trim or wider architectural palette. Water-based and synthetic paints may be selected according to the paint manufacturer's system requirements.
P5060B50 can be used at the foot of decorative pilasters in entrance halls, living rooms, stair landings, hotel lobbies, restaurants and office reception areas. For exterior applications, it can frame a villa entrance, reinforce the visual composition of a facade or finish pilasters beside doors and windows. The base is decorative rather than structural; any existing concrete, masonry or steel support remains responsible for building loads. Exterior paint must provide UV resistance, and joints and fixing points should be sealed with an exterior-grade filler.
Installation requires a clean, dry and suitably prepared substrate. Cut adjoining profiles with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, and secure the component with mechanical fixings such as screws and suitable plugs. Mechanical support is essential because the product has its own weight and connection loads. After filling, sand with 180-220 grit abrasive, apply any optional additional primer required by the selected paint system, and finish with two coats of paint. Compared with plaster, the polyurethane decorative material is lighter and less prone to breakage; compared with wood or MDF, it does not rot and offers better resistance to moisture, while retaining fine moulded definition. The product is made to order and supplied ex works; the listed price refers to the product only.
- P5060B50 is intended for the lower section of decorative pilaster compositions, giving vertical wall elements a grounded architectural finish
- In a living room, it can anchor pilasters around a fireplace wall, media wall or formal doorway
- In an entrance hall, use matching bases on both sides of a portal to establish a balanced frame without presenting the column as structural
- Hotel lobbies, restaurant entrances and office reception areas can use the base to define circulation zones and add visual weight to tall wall treatments
- For residential projects, it suits villa entrances, stair landings and feature walls
- On facades, the product can finish pilasters beside doors, windows or covered porches when coated with UV-resistant exterior paint
- The 33 x 66 cm footprint and 109 cm height make it appropriate for compositions with a pronounced lower zone rather than narrow trim-only detailing
- Coordinate the final paint colour with the facade render, wall finish or adjacent architectural profiles
- Use exterior filler at joints and screw points so the completed installation presents a continuous, maintained surface
- Check the substrate and ensure it is clean, dry, sound and free from dust or loose coatings
- Plan the pilaster layout before fixing the base, allowing for the product's own weight and connection loads
- Where adjoining profiles meet, make accurate 45-degree mitre cuts with the correct cutting equipment
- Apply polyurethane (PU) mounting adhesive to the approved contact areas, then position the base carefully and press it into alignment
- Mechanical fixing with screws and suitable plugs is mandatory; use additional support where the profile width, substrate or project conditions require it
- Do not use silicone adhesive
- Fill joints, screw heads and minor surface transitions with a compatible filler
- Once cured according to the selected system, sand with 180-220 grit abrasive, apply an optional additional primer if required by the paint manufacturer, and finish with two paint coats
- Exterior installations require UV-resistant paint and exterior-grade joint filler
- Remove dust with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive pads, aggressive solvents and cleaning tools that could mark the painted surface or expose the factory-primed layer
- For painted applications, follow the maintenance instructions of the chosen paint manufacturer, particularly for exterior exposure
- Inspect exterior joints, screw points and painted areas periodically; renew exterior filler or coating if cracking, impact damage or local deterioration becomes visible
- Additional primer and paint system decisions remain the responsibility of the applicator and paint manufacturer, and Polure does not provide a guarantee for the selected paint system
Can the P5060B50 pilaster base be used outdoors?
Yes. P5060B50 is suitable for exterior decorative applications when installed on an appropriate substrate and finished with UV-resistant exterior paint. It can be used at villa entrances, facade pilasters, covered porches and architectural door surrounds. The component is decorative and does not carry structural loads. Exterior joints and screw points should be sealed with exterior-grade filler, and the complete paint system must be selected and applied according to the paint manufacturer's instructions.
How is the pilaster column base installed and painted?
Prepare a clean, dry substrate, check the layout and make 45-degree mitre cuts where adjoining profiles require them. Apply polyurethane (PU) mounting adhesive and secure the base with screws and suitable plugs; mechanical fixing is mandatory. Fill joints and fixing points, then sand with 180-220 grit abrasive. The factory primer prepares the surface for painting, but an additional primer may be applied if required by the chosen paint manufacturer. Finish with two compatible coats of paint.
What are the size and material specifications of this pilaster base?
The P5060B50 measures 33 x 66 x 109 cm, listed as width x depth x height. It is produced from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Water absorption is below 1%, and the material has high dimensional stability. Dimensional stability has been tested at -20 °C / +70 °C; this is a test range, not a declared service-temperature rating. The product has its own weight and must be mechanically secured.
What advantages does polyurethane offer compared with plaster or wood?
Rigid polyurethane is lighter and less vulnerable to breakage than plaster, which can simplify handling during decorative installation. Its closed-cell structure has water absorption below 1% and resists moisture-related deterioration, while the moulded surface preserves defined architectural forms. Compared with wood or MDF, it does not rot and is less affected by ordinary humidity exposure. Like other decorative profiles, it still requires correct substrate preparation, fixing, joint treatment and a suitable protective paint system.
Can the P5060B50 be repainted to match a project?
Yes. The supplied factory-primed surface is intended to prepare the pilaster base for a compatible paint finish. Water-based and synthetic paints may be used when approved by the paint manufacturer. The final colour can be coordinated with interior walls, facade render or adjacent architectural elements. An additional primer is optional and depends on the selected paint system; paint manufacturers may not guarantee surfaces coated without their specified primer. Polure does not guarantee the selected paint system or accept responsibility for its performance.