Polyurethane Decoration Product Pilaster Base 23x45x75 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey |
| Color | Boyanabilir; uygulama öncesi mevcut yüzey rengi belirtilmemiştir |
| Density | 150-220 kg/m³ (production target ~160 kg/m³) |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 23 cm |
| Dimensions | 225 × 449 × 745 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane decoration product P5040B50 is a pilaster column base designed to complete the lower section of architectural pilaster and column compositions. Measuring 23 x 45 x 75 cm in width, depth and height, it gives the bottom of a vertical decorative element a clearly defined architectural termination. The component is intended for decorative cladding and detailing, not for carrying structural loads.
The base is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction combines low weight with the firm profile needed for architectural finishing. It absorbs less than 1% water, remains dimensionally stable and resists rot, mould and freeze-thaw cycling. The material is suitable for temperatures from -100 °C to +80 °C without form loss under the stated conditions. Its difficult-to-ignite, self-extinguishing character supports use in decorative applications, while project-specific fire requirements must always be assessed separately.
P5040B50 has a decorative, paintable surface supplied with a factory primer. The primer prepares the surface for water-based or synthetic paint and allows the lower base to be coordinated with the surrounding wall, pilaster shaft and architectural trim. Additional primer is optional rather than automatically unnecessary: paint manufacturers may not provide a warranty when their recommended primer system is omitted. Polure does not guarantee third-party paint systems, so the selected coating manufacturer's instructions should determine the final preparation.
As a pilaster column base, this piece is suitable for entrance halls, living rooms, hotel lobbies, restaurants, offices and decorative wall compositions in residential or commercial interiors. It can also be used on exterior pilaster arrangements, including villa entrances and facade framing, provided that an exterior-grade, UV-resistant paint system is applied. The 75 cm height creates a substantial lower section for larger wall elevations, while the 23 x 45 cm footprint suits compositions where the base needs visible depth without becoming a structural projection.
Installation begins on a clean, dry and sound surface. Cut adjoining profiles with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, and secure the component with mechanical fixings such as suitable screws and anchors. Mechanical fastening is mandatory; wide or heavily loaded assemblies may require additional project-specific support. Fill joints and fixing points, sand with 180-220 grit abrasive, apply the chosen primer system where required, and finish with two coats of compatible paint. Silicone adhesive should not be used.
Compared with plaster, the rigid polyurethane base is lighter and less prone to breakage during handling. Unlike solid timber, it does not rot from ordinary moisture exposure or attract insects, and it can be repaired, sanded and repainted. Its closed-cell body, crisp moulded profile and paintable finish make P5040B50 a practical decorative transition between a pilaster shaft and the floor or plinth zone.
- P5040B50 is intended for the lower section of pilaster and column compositions
- In a living room, place it beneath a wall-mounted pilaster to create a defined transition above the skirting or floor zone
- In an entrance hall, it can frame door surrounds or reinforce the visual rhythm of paired pilasters without functioning as a structural support
- The 75 cm height is suitable for compositions where the base needs to remain prominent against a tall wall or generous ceiling height
- For hotel lobbies, restaurants and offices, the pilaster base can help establish a repeated architectural layout along feature walls, reception areas or circulation routes
- It is also suitable for villa entrances and facade pilasters
- Exterior use requires a compatible UV-resistant paint system, with exterior filler applied over joints and fixing points
- Coordinate the final colour with the pilaster shaft, wall trim and surrounding facade rather than treating the base as an isolated element
- The 23 x 45 cm footprint should be checked against the available wall return, floor line and adjacent decorative profiles before ordering
- Prepare the substrate so it is clean, dry, stable and free from dust, loose paint or grease
- Check the position of the pilaster base against the shaft, floor line and adjoining architectural elements before bonding
- Where profiles meet at a corner, make a precise 45-degree mitre cut using suitable tools
- Apply polyurethane (PU) mounting adhesive to the rear contact areas and position the piece carefully
- Mechanical fixing with suitable screws and anchors is mandatory; select the fixing method according to the substrate and the project's loads
- Do not use silicone adhesive
- Fill visible joints and fixing points with a compatible filler, then sand with 180-220 grit abrasive
- Apply additional primer if required by the selected paint manufacturer, followed by two compatible coats of water-based or synthetic paint
- For exterior work, use UV-resistant paint and exterior-grade filler at joints and fixings
- Clean the painted surface with a soft, slightly damp cloth and avoid abrasive pads, solvents or aggressive cleaning agents that could damage the coating
- Do not scrape the decorative profile with hard tools
- Maintenance depends on the paint system and the environment in which the pilaster base is installed
- On exterior applications, inspect the paint film, joints and fixing points periodically, especially after severe weather
- Repair damaged filler or coating promptly using compatible exterior products
- Polure does not guarantee third-party paint systems, so follow the coating manufacturer's maintenance recommendations
Can P5040B50 be used on an exterior facade?
Yes. P5040B50 is suitable for exterior decorative pilaster compositions when the complete coating system is appropriate for outdoor exposure. Apply a UV-resistant exterior paint, and seal joints and screw points with exterior-grade filler. The product is decorative and does not carry structural loads. Confirm that the substrate, fixings and surrounding facade details are suitable for the project before installation.
How is the pilaster base installed and painted?
Install the base on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fastening. Silicone adhesive should not be used. Mitre adjoining profiles at 45 degrees where needed, fill joints and fixing points, then sand with 180-220 grit abrasive. The factory primer prepares the surface for paint, but an additional primer may be used when required by the paint manufacturer. Finish with two compatible coats.
How durable and heavy is this polyurethane pilaster base?
The rigid closed-cell polyurethane has a density of 150-220 kg/m³, giving the component a firm architectural profile with lower weight than plaster, stone or solid timber. It absorbs less than 1% water and resists rot, mould and freeze-thaw cycling. Its stated temperature range is -100 °C to +80 °C. Actual handling and fixing requirements depend on the substrate, the installation position and the complete decorative assembly.
What advantages does it have over plaster or wood?
Compared with plaster, P5040B50 is lighter and less vulnerable to breakage during handling and installation. Compared with solid wood, its closed-cell polyurethane body is resistant to ordinary moisture-related rot and insect damage. The paintable surface can be filled, sanded and recoated if minor installation marks occur. It also preserves a moulded decorative profile without requiring the weight of a mineral architectural element.
Is P5040B50 suitable for both interior and exterior decoration?
Yes. The pilaster base can be used in interiors such as living rooms, entrance halls, hotel lobbies, restaurants and offices, as well as on decorative villa or commercial facades. Interior and exterior applications require different finishing choices. For outdoor use, select UV-resistant exterior paint and exterior-grade filler for joints and fixing points. The component should always be treated as a decorative architectural element, not as a load-bearing column.
Similar Products(Architectural Pilaster Columns)
Polyurethane decoration product P5040B50 is a pilaster column base designed to complete the lower section of architectural pilaster and column compositions. Measuring 23 x 45 x 75 cm in width, depth and height, it gives the bottom of a vertical decorative element a clearly defined architectural termination. The component is intended for decorative cladding and detailing, not for carrying structural loads.
The base is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction combines low weight with the firm profile needed for architectural finishing. It absorbs less than 1% water, remains dimensionally stable and resists rot, mould and freeze-thaw cycling. The material is suitable for temperatures from -100 °C to +80 °C without form loss under the stated conditions. Its difficult-to-ignite, self-extinguishing character supports use in decorative applications, while project-specific fire requirements must always be assessed separately.
P5040B50 has a decorative, paintable surface supplied with a factory primer. The primer prepares the surface for water-based or synthetic paint and allows the lower base to be coordinated with the surrounding wall, pilaster shaft and architectural trim. Additional primer is optional rather than automatically unnecessary: paint manufacturers may not provide a warranty when their recommended primer system is omitted. Polure does not guarantee third-party paint systems, so the selected coating manufacturer's instructions should determine the final preparation.
As a pilaster column base, this piece is suitable for entrance halls, living rooms, hotel lobbies, restaurants, offices and decorative wall compositions in residential or commercial interiors. It can also be used on exterior pilaster arrangements, including villa entrances and facade framing, provided that an exterior-grade, UV-resistant paint system is applied. The 75 cm height creates a substantial lower section for larger wall elevations, while the 23 x 45 cm footprint suits compositions where the base needs visible depth without becoming a structural projection.
Installation begins on a clean, dry and sound surface. Cut adjoining profiles with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, and secure the component with mechanical fixings such as suitable screws and anchors. Mechanical fastening is mandatory; wide or heavily loaded assemblies may require additional project-specific support. Fill joints and fixing points, sand with 180-220 grit abrasive, apply the chosen primer system where required, and finish with two coats of compatible paint. Silicone adhesive should not be used.
Compared with plaster, the rigid polyurethane base is lighter and less prone to breakage during handling. Unlike solid timber, it does not rot from ordinary moisture exposure or attract insects, and it can be repaired, sanded and repainted. Its closed-cell body, crisp moulded profile and paintable finish make P5040B50 a practical decorative transition between a pilaster shaft and the floor or plinth zone.
- P5040B50 is intended for the lower section of pilaster and column compositions
- In a living room, place it beneath a wall-mounted pilaster to create a defined transition above the skirting or floor zone
- In an entrance hall, it can frame door surrounds or reinforce the visual rhythm of paired pilasters without functioning as a structural support
- The 75 cm height is suitable for compositions where the base needs to remain prominent against a tall wall or generous ceiling height
- For hotel lobbies, restaurants and offices, the pilaster base can help establish a repeated architectural layout along feature walls, reception areas or circulation routes
- It is also suitable for villa entrances and facade pilasters
- Exterior use requires a compatible UV-resistant paint system, with exterior filler applied over joints and fixing points
- Coordinate the final colour with the pilaster shaft, wall trim and surrounding facade rather than treating the base as an isolated element
- The 23 x 45 cm footprint should be checked against the available wall return, floor line and adjacent decorative profiles before ordering
- Prepare the substrate so it is clean, dry, stable and free from dust, loose paint or grease
- Check the position of the pilaster base against the shaft, floor line and adjoining architectural elements before bonding
- Where profiles meet at a corner, make a precise 45-degree mitre cut using suitable tools
- Apply polyurethane (PU) mounting adhesive to the rear contact areas and position the piece carefully
- Mechanical fixing with suitable screws and anchors is mandatory; select the fixing method according to the substrate and the project's loads
- Do not use silicone adhesive
- Fill visible joints and fixing points with a compatible filler, then sand with 180-220 grit abrasive
- Apply additional primer if required by the selected paint manufacturer, followed by two compatible coats of water-based or synthetic paint
- For exterior work, use UV-resistant paint and exterior-grade filler at joints and fixings
- Clean the painted surface with a soft, slightly damp cloth and avoid abrasive pads, solvents or aggressive cleaning agents that could damage the coating
- Do not scrape the decorative profile with hard tools
- Maintenance depends on the paint system and the environment in which the pilaster base is installed
- On exterior applications, inspect the paint film, joints and fixing points periodically, especially after severe weather
- Repair damaged filler or coating promptly using compatible exterior products
- Polure does not guarantee third-party paint systems, so follow the coating manufacturer's maintenance recommendations
Can P5040B50 be used on an exterior facade?
Yes. P5040B50 is suitable for exterior decorative pilaster compositions when the complete coating system is appropriate for outdoor exposure. Apply a UV-resistant exterior paint, and seal joints and screw points with exterior-grade filler. The product is decorative and does not carry structural loads. Confirm that the substrate, fixings and surrounding facade details are suitable for the project before installation.
How is the pilaster base installed and painted?
Install the base on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fastening. Silicone adhesive should not be used. Mitre adjoining profiles at 45 degrees where needed, fill joints and fixing points, then sand with 180-220 grit abrasive. The factory primer prepares the surface for paint, but an additional primer may be used when required by the paint manufacturer. Finish with two compatible coats.
How durable and heavy is this polyurethane pilaster base?
The rigid closed-cell polyurethane has a density of 150-220 kg/m³, giving the component a firm architectural profile with lower weight than plaster, stone or solid timber. It absorbs less than 1% water and resists rot, mould and freeze-thaw cycling. Its stated temperature range is -100 °C to +80 °C. Actual handling and fixing requirements depend on the substrate, the installation position and the complete decorative assembly.
What advantages does it have over plaster or wood?
Compared with plaster, P5040B50 is lighter and less vulnerable to breakage during handling and installation. Compared with solid wood, its closed-cell polyurethane body is resistant to ordinary moisture-related rot and insect damage. The paintable surface can be filled, sanded and recoated if minor installation marks occur. It also preserves a moulded decorative profile without requiring the weight of a mineral architectural element.
Is P5040B50 suitable for both interior and exterior decoration?
Yes. The pilaster base can be used in interiors such as living rooms, entrance halls, hotel lobbies, restaurants and offices, as well as on decorative villa or commercial facades. Interior and exterior applications require different finishing choices. For outdoor use, select UV-resistant exterior paint and exterior-grade filler for joints and fixing points. The component should always be treated as a decorative architectural element, not as a load-bearing column.