55x55x94 cm Polyurethane Decorative Product Pilaster Base
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative surface |
| Color | Paintable; current color not specified |
| Density | Belirtilmemiştir |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 55 cm |
| Dimensions | 554 × 554 × 940 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5050B is a polyurethane decorative product designed as the lower base element of a pilaster column. Measuring 55 x 55 x 94 cm, it gives a pilaster installation a defined architectural foot at entrances, facade compositions and interior feature walls. The component is decorative rather than structural and should be installed as a finish element over a suitable supporting surface or existing construction.
The rigid PU body has a closed-cell structure and a density of 150-220 kg/m³, combining a substantial appearance with lower handling weight than plaster, concrete or solid timber alternatives. Water absorption is below 1%, while the material resists moisture-related decay and remains dimensionally stable in normal applications. The stated dimensional stability test range is -20 °C / +70 °C. For fire behaviour, rigid PU has fire class B2 (DIN 4102-1); project-specific fire documentation should always be checked where required.
P5050B has a decorative factory-prepared surface intended for finishing rather than permanent exposure in an unpainted state. It can be painted in a colour selected for the surrounding architecture, using a suitable water-based or synthetic coating system. The 55 cm width gives the pilaster base a visually substantial proportion, while the 94 cm height creates a clear transition between the lower wall zone and the vertical pilaster body. The visible profile should be coordinated with the adjoining pilaster sections and the overall facade or room design.
In interiors, the P5050B pilaster base can frame a reception wall, enrich a hotel lobby, define an entrance hall or add architectural order beside a fireplace surround, doorway or feature panel. In residential settings, it may be used in a living room, dining area or grand entrance composition. For exterior work, the product is suitable for villa facades, entrance portals and commercial elevations when finished with a UV-resistant exterior paint. It is a decorative element and must not be treated as a load-bearing column.
Installation begins with a clean, dry and sound substrate. The piece is cut or adjusted to the project detail where necessary, then fixed with polyurethane (PU) mounting adhesive and mandatory mechanical fastening using appropriate screws and, where required, suitable anchors or dowels. Silicone must not be used as the mounting adhesive. Joints and screw points are filled with exterior-grade filler outdoors, followed by 180-220 grit sanding, optional additional primer and two coats of compatible paint. The factory primer prepares the surface for painting, but coating manufacturers may require their own primer for warranty purposes; Polure does not warrant customer-selected paint systems.
- P5050B is intended for the lower section of pilaster column compositions in both interior and exterior architecture
- In a living room, it can anchor a pilaster beside a doorway, fireplace surround or built-in feature wall
- In an entrance hall, two matching bases can establish a formal frame around a passage or reception zone
- Hotel lobbies, restaurants and offices can use the 94 cm high element to create a stronger vertical rhythm without adding a heavy masonry component
- Outdoors, the base is suitable for villa entrances, facade pilasters and commercial frontage details when protected with a UV-resistant exterior paint
- Coordinate the 55 cm width with the pilaster shaft, wall depth and adjacent trim before installation
- Since the element is decorative and not structural, it should be fixed over a sound supporting construction and never specified as a load-bearing column
- Prepare a clean, dry and stable substrate before positioning the P5050B pilaster base
- Check the 55 x 55 x 94 cm dimensions against the adjoining pilaster and mark the final alignment
- Where adjustment is required, use accurate cutting tools and dry-fit the component before bonding
- Apply polyurethane (PU) mounting adhesive to the appropriate contact areas and secure the product with mandatory mechanical fastening using suitable screws and, where needed, anchors or dowels
- Do not use silicone as the mounting adhesive
- Fill joints and screw recesses, sand with 180-220 grit abrasive paper, apply additional primer if required by the selected paint manufacturer, and finish with two compatible coats
- Exterior applications require UV-resistant paint
- Clean the P5050B surface with a soft, dry or lightly damp cloth
- Avoid abrasive cleaners, hard brushes, solvents and aggressive rubbing that could mark the decorative finish or affect the paint layer
- For exterior installations, inspect the paint, joints and screw points periodically, especially after severe weather exposure
- Repair open joints or damaged coating with a compatible exterior filler and paint system
- Because paint performance depends on the selected product and site conditions, Polure does not provide a guarantee for customer-applied coatings
Can the P5050B pilaster base be used outdoors?
Yes. P5050B is suitable for exterior decorative applications such as villa entrances, facade pilasters and commercial frontage details. The surface must be finished with a UV-resistant exterior paint because unpainted rigid PU may yellow under prolonged sunlight. Exterior joints and screw points should be sealed with a compatible exterior filler. The component is decorative, not load-bearing, so it must be fixed over a suitable supporting construction.
How is the pilaster base installed and painted?
Install P5050B on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with mandatory mechanical fastening. Silicone should not be used for mounting. After fixing, fill joints and screw recesses, sand with 180-220 grit abrasive paper, apply an additional primer if required by the paint manufacturer, and apply two compatible coats. The factory-prepared surface supports painting, but coating warranties depend on the selected paint system.
What are the material properties of this pilaster base?
P5050B is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its water absorption is below 1%, and the material offers high dimensional stability in suitable applications. The dimensional stability test range is -20 °C / +70 °C. Rigid PU has fire class B2 (DIN 4102-1), but the product should not be presented as a structural or fire-rated building component without project-specific documentation.
What advantage does polyurethane offer over plaster or timber?
Polyurethane provides a lighter and more manageable decorative alternative to plaster, concrete and solid timber. It is resistant to moisture-related decay, does not depend on heavy masonry construction and can reproduce a consistent architectural profile. Unlike plaster, it is less vulnerable to ordinary handling impact, while its closed-cell structure offers lower water absorption. The finished surface can be filled, sanded and repainted when required.
Can P5050B be matched to different interior or facade colour schemes?
Yes. P5050B is supplied as a paintable decorative element rather than as a fixed final colour. Water-based or synthetic paint systems may be selected according to the project, provided they are compatible with the prepared surface and the intended environment. Interior and exterior coatings should be chosen separately where exposure conditions differ. For outdoor use, UV resistance is essential. Additional primer remains optional but may be required by the coating manufacturer.