Polyurethane Decorative Product Pilaster Column Base 34x34x56 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey |
| Color | Boya uygulamasına uygun ham yüzey |
| Density | Belirtilmemiştir |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 34 cm |
| Dimensions | 337 × 337 × 555 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane decorative product P5030B is a pilaster column base designed to finish the lower section of a pilaster with a defined architectural transition. Measuring 34 x 34 x 56 cm, this substantial base suits vertical column compositions in residential, hospitality and commercial interiors as well as selected exterior facade projects. It is a decorative architectural element and is not intended to carry structural loads.
The base is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its low water absorption, below 1%, supports use in areas exposed to normal humidity when the complete application is correctly prepared. The material maintains high dimensional stability and is rated for a temperature range of -100 °C / +80 °C without form loss under the stated conditions. The factory-primed surface can receive water-based or synthetic paint. For exterior work, a UV-resistant paint system is required because unpainted polyurethane may yellow.
With its broad 34 x 34 cm footprint and 56 cm height, the P5030B creates a visually grounded lower termination for a pilaster rather than a narrow decorative strip. The rectangular proportions allow the base to sit clearly beneath a matching vertical shaft and help establish a balanced transition between the column composition and the floor, plinth or facade plane. Since no colour is specified, the item can be finished to coordinate with the surrounding architectural palette.
Inside, the pilaster base can frame entrance halls, living rooms, dining areas, stair approaches, hotel lobbies, restaurants and reception zones. It is especially useful where a wall-mounted pilaster needs a stronger visual connection with the floor or lower wall. Outdoors, the same component may be used at villa entrances, sheltered facade compositions and commercial frontage details, provided it is painted with a UV-resistant coating and the joints and fixing points are sealed with exterior-grade filler. It can also be paired with decorative pilasters around doorways or as part of a symmetrical wall arrangement.
Installation begins on a clean, dry and sound surface. Check the alignment, make any required 45-degree mitre cuts on adjoining profiles, then apply a polyurethane (PU) mounting adhesive; silicone must not be used. Mechanical fixing with suitable screws and anchors is mandatory, with additional support selected according to the product's own weight, connection loads and the substrate. Fill joints and fixing points, sand with 180-220 grit abrasive, apply the selected primer system if required by the paint manufacturer, and finish with two coats of paint. Compared with plaster, the closed-cell polyurethane construction is lighter and less prone to breakage; compared with timber or MDF, it offers better resistance to moisture-related decay and retains crisp moulded detail. The P5030B provides a repairable, paintable finish for architectural pilaster detailing.
- The P5030B pilaster column base is intended for the lower termination of vertical pilaster compositions
- In a living room or entrance hall, place it beneath a pilaster framing a doorway, fireplace surround or feature wall, keeping the 34 x 34 cm footprint aligned with the shaft above
- In a hotel lobby, restaurant or office reception area, it can create repeated pilaster bays and a stronger visual transition at floor level
- The 56 cm height gives the base a noticeable architectural presence and works well where a short plinth would look insufficient
- For villa entrances and exterior facade detailing, use the base beneath decorative pilasters around doors, porticos or selected wall sections
- Exterior application requires a UV-resistant paint system, with joints and screw points sealed using exterior filler
- The component is decorative rather than structural, so it should be fixed to a sound substrate and coordinated with the dimensions of the pilaster shaft
- Its paintable factory-primed surface allows the finish to match stone-effect, light architectural or contrasting facade schemes without changing the moulded form
- Prepare a clean, dry and stable substrate before positioning the P5030B
- Check the vertical axis and the relationship between the base, the pilaster shaft and the adjacent floor or facade line
- Cut adjoining polyurethane profiles with a 45-degree mitre where required
- Apply polyurethane (PU) mounting adhesive to the prepared contact areas; silicone is not suitable for this application
- Mechanical fixing with screws and suitable anchors is mandatory
- Select the fixing method according to the substrate, the product's own weight and the connection loads, adding support where the project requires it
- Fill joints and screw recesses with suitable filler, then sand with 180-220 grit abrasive
- Follow the paint manufacturer's instructions regarding any additional primer, and apply two coats of compatible water-based or synthetic paint
- For exterior installations, seal joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the pilaster base with a soft, slightly damp cloth and avoid abrasive cleaners, stiff brushes and aggressive solvents
- Do not use scraping tools that could damage the paint film or moulded edges
- Inspect exterior joints, screw points and painted surfaces periodically, especially after prolonged exposure to weather
- Any repainting requirement depends on the selected coating system and the level of environmental exposure
- If a repair is needed, refill the affected area, sand it carefully and repaint with a compatible system
- Unpainted polyurethane may yellow under UV exposure, so exterior applications should retain a suitable UV-resistant finish
Can the P5030B pilaster base be used outdoors?
Yes. The P5030B can be used in suitable exterior facade compositions, including villa entrances and decorative pilaster surrounds. Exterior installation requires a UV-resistant paint because unpainted polyurethane may yellow. Seal joints and screw points with exterior-grade filler, fix the base securely to a sound substrate and select the attachment method according to the product's own weight and connection loads. The component is decorative and does not replace a structural column or support.
How is the pilaster column base installed and painted?
Start with a clean, dry and sound surface. Align the base with the pilaster shaft, use 45-degree mitre cuts where adjoining profiles require them, and apply polyurethane (PU) mounting adhesive. Silicone must not be used. Mechanical fixing with suitable screws and anchors is mandatory. Fill and sand the joints with 180-220 grit abrasive, then follow the paint manufacturer's primer guidance before applying two coats of compatible paint.
What are the dimensions and material properties of P5030B?
The P5030B measures 34 x 34 x 56 cm and is made from rigid, closed-cell polyurethane. Its density is 150-220 kg/m³, while water absorption is below 1%. The material has high dimensional stability and a stated temperature range of -100 °C / +80 °C. These figures describe the material; fixing and substrate suitability must still be assessed for each installation.
Is the P5030B a structural column support?
No. The P5030B is a decorative pilaster column base and must not be specified as a load-bearing or structural element. It can be installed over or beside a structural wall, column or other stable construction to complete the visual composition. The product's own weight and connection loads remain relevant, so the substrate, adhesive and mandatory mechanical fixings should be selected for the actual project conditions.
What advantage does polyurethane offer over plaster or timber for this base?
Rigid polyurethane is lighter and less prone to breakage than plaster, while its closed-cell structure offers below-1% water absorption. Compared with timber or MDF, it is resistant to moisture-related decay and preserves moulded detail without requiring a wood-based substrate. The factory-primed surface can be painted, repaired and refinished. These benefits simplify handling, but they do not remove the need for correct fixing, joint treatment and compatible paint.
Similar Products(Architectural Pilaster Columns)
Polyurethane decorative product P5030B is a pilaster column base designed to finish the lower section of a pilaster with a defined architectural transition. Measuring 34 x 34 x 56 cm, this substantial base suits vertical column compositions in residential, hospitality and commercial interiors as well as selected exterior facade projects. It is a decorative architectural element and is not intended to carry structural loads.
The base is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its low water absorption, below 1%, supports use in areas exposed to normal humidity when the complete application is correctly prepared. The material maintains high dimensional stability and is rated for a temperature range of -100 °C / +80 °C without form loss under the stated conditions. The factory-primed surface can receive water-based or synthetic paint. For exterior work, a UV-resistant paint system is required because unpainted polyurethane may yellow.
With its broad 34 x 34 cm footprint and 56 cm height, the P5030B creates a visually grounded lower termination for a pilaster rather than a narrow decorative strip. The rectangular proportions allow the base to sit clearly beneath a matching vertical shaft and help establish a balanced transition between the column composition and the floor, plinth or facade plane. Since no colour is specified, the item can be finished to coordinate with the surrounding architectural palette.
Inside, the pilaster base can frame entrance halls, living rooms, dining areas, stair approaches, hotel lobbies, restaurants and reception zones. It is especially useful where a wall-mounted pilaster needs a stronger visual connection with the floor or lower wall. Outdoors, the same component may be used at villa entrances, sheltered facade compositions and commercial frontage details, provided it is painted with a UV-resistant coating and the joints and fixing points are sealed with exterior-grade filler. It can also be paired with decorative pilasters around doorways or as part of a symmetrical wall arrangement.
Installation begins on a clean, dry and sound surface. Check the alignment, make any required 45-degree mitre cuts on adjoining profiles, then apply a polyurethane (PU) mounting adhesive; silicone must not be used. Mechanical fixing with suitable screws and anchors is mandatory, with additional support selected according to the product's own weight, connection loads and the substrate. Fill joints and fixing points, sand with 180-220 grit abrasive, apply the selected primer system if required by the paint manufacturer, and finish with two coats of paint. Compared with plaster, the closed-cell polyurethane construction is lighter and less prone to breakage; compared with timber or MDF, it offers better resistance to moisture-related decay and retains crisp moulded detail. The P5030B provides a repairable, paintable finish for architectural pilaster detailing.
- The P5030B pilaster column base is intended for the lower termination of vertical pilaster compositions
- In a living room or entrance hall, place it beneath a pilaster framing a doorway, fireplace surround or feature wall, keeping the 34 x 34 cm footprint aligned with the shaft above
- In a hotel lobby, restaurant or office reception area, it can create repeated pilaster bays and a stronger visual transition at floor level
- The 56 cm height gives the base a noticeable architectural presence and works well where a short plinth would look insufficient
- For villa entrances and exterior facade detailing, use the base beneath decorative pilasters around doors, porticos or selected wall sections
- Exterior application requires a UV-resistant paint system, with joints and screw points sealed using exterior filler
- The component is decorative rather than structural, so it should be fixed to a sound substrate and coordinated with the dimensions of the pilaster shaft
- Its paintable factory-primed surface allows the finish to match stone-effect, light architectural or contrasting facade schemes without changing the moulded form
- Prepare a clean, dry and stable substrate before positioning the P5030B
- Check the vertical axis and the relationship between the base, the pilaster shaft and the adjacent floor or facade line
- Cut adjoining polyurethane profiles with a 45-degree mitre where required
- Apply polyurethane (PU) mounting adhesive to the prepared contact areas; silicone is not suitable for this application
- Mechanical fixing with screws and suitable anchors is mandatory
- Select the fixing method according to the substrate, the product's own weight and the connection loads, adding support where the project requires it
- Fill joints and screw recesses with suitable filler, then sand with 180-220 grit abrasive
- Follow the paint manufacturer's instructions regarding any additional primer, and apply two coats of compatible water-based or synthetic paint
- For exterior installations, seal joints and fixing points with exterior-grade filler and use UV-resistant paint
- Clean the pilaster base with a soft, slightly damp cloth and avoid abrasive cleaners, stiff brushes and aggressive solvents
- Do not use scraping tools that could damage the paint film or moulded edges
- Inspect exterior joints, screw points and painted surfaces periodically, especially after prolonged exposure to weather
- Any repainting requirement depends on the selected coating system and the level of environmental exposure
- If a repair is needed, refill the affected area, sand it carefully and repaint with a compatible system
- Unpainted polyurethane may yellow under UV exposure, so exterior applications should retain a suitable UV-resistant finish
Can the P5030B pilaster base be used outdoors?
Yes. The P5030B can be used in suitable exterior facade compositions, including villa entrances and decorative pilaster surrounds. Exterior installation requires a UV-resistant paint because unpainted polyurethane may yellow. Seal joints and screw points with exterior-grade filler, fix the base securely to a sound substrate and select the attachment method according to the product's own weight and connection loads. The component is decorative and does not replace a structural column or support.
How is the pilaster column base installed and painted?
Start with a clean, dry and sound surface. Align the base with the pilaster shaft, use 45-degree mitre cuts where adjoining profiles require them, and apply polyurethane (PU) mounting adhesive. Silicone must not be used. Mechanical fixing with suitable screws and anchors is mandatory. Fill and sand the joints with 180-220 grit abrasive, then follow the paint manufacturer's primer guidance before applying two coats of compatible paint.
What are the dimensions and material properties of P5030B?
The P5030B measures 34 x 34 x 56 cm and is made from rigid, closed-cell polyurethane. Its density is 150-220 kg/m³, while water absorption is below 1%. The material has high dimensional stability and a stated temperature range of -100 °C / +80 °C. These figures describe the material; fixing and substrate suitability must still be assessed for each installation.
Is the P5030B a structural column support?
No. The P5030B is a decorative pilaster column base and must not be specified as a load-bearing or structural element. It can be installed over or beside a structural wall, column or other stable construction to complete the visual composition. The product's own weight and connection loads remain relevant, so the substrate, adhesive and mandatory mechanical fixings should be selected for the actual project conditions.
What advantage does polyurethane offer over plaster or timber for this base?
Rigid polyurethane is lighter and less prone to breakage than plaster, while its closed-cell structure offers below-1% water absorption. Compared with timber or MDF, it is resistant to moisture-related decay and preserves moulded detail without requiring a wood-based substrate. The factory-primed surface can be painted, repaired and refinished. These benefits simplify handling, but they do not remove the need for correct fixing, joint treatment and compatible paint.