42x42x19 cm Pilaster Column Capital Polyurethane Decoration Product
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey |
| Color | Boyanabilir; mevcut renk belirtilmemiştir |
| Density | Belirtilmemiştir |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 42 cm |
| Dimensions | 424 × 424 × 190 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
P5030D is a polyurethane pilaster column capital designed to complete the upper section of a decorative pilaster with a clearly defined architectural profile. Measuring 42 x 42 x 19 cm in width, depth and height, the capital provides a proportionate finishing element for interior schemes and exterior facade compositions. It is a decorative component rather than a structural support, so the substrate and fixing system must be assessed according to the product's own weight and connection loads.
The P5030D pilaster capital is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction combines low weight with a firm surface suitable for architectural detailing. The material has water absorption below 1%, high dimensional stability and resistance to rot and mould. Within the technical range of -100 °C / +80 °C, the product maintains its form without loss. Its B2 fire behaviour means it is difficult to ignite and tends to extinguish when the flame source is removed.
The P5030D capital presents a balanced, symmetrical architectural form intended to visually terminate a pilaster. Its decorative surface is supplied ready for painting, allowing the finish to be coordinated with wall, ceiling or facade colours. Water-based and synthetic paints can be used. The factory primer prepares the surface for painting; an additional primer remains optional and depends on the selected paint system. Paint manufacturers may not provide warranty coverage when their recommended primer is omitted, and Polure does not guarantee compatibility with the chosen paint.
In interiors, the P5030D can finish pilasters in entrance halls, living rooms, dining rooms, hotel lobbies, restaurants and reception areas. It can also frame a wall feature, doorway or fireplace surround when integrated with a matching pilaster body. Outdoors, the capital can be used on villa facades, covered entrances and commercial elevations. Exterior applications require UV-resistant paint, while joints and screw points should be sealed with exterior-grade filler. The 42 x 42 cm footprint suits medium-scale pilaster compositions without overwhelming a standard room or facade bay.
For installation, begin with a clean, dry, sound and dust-free surface. Check the dimensions and alignment before fixing, then use polyurethane (PU) mounting adhesive together with mechanical fastening. Silicone adhesive must not be used. Cut adjoining pieces with a 45-degree mitre where required, secure the capital with screws and suitable anchors, and fill the joints and fixing points. After curing according to the selected system, sand with 180-220 grit paper, apply primer where required and finish with two coats of paint.
Compared with plaster, the P5030D is easier to handle and less prone to breaking during installation. Unlike solid timber, polyurethane is resistant to moisture-related decay and insect damage, while its moulded surface preserves fine architectural definition. The result is a repairable, paintable decorative capital that can be refreshed as the surrounding design changes.
- The P5030D pilaster column capital is intended for the upper termination of decorative pilasters in both interior and exterior architecture
- In a living room, it can complete pilasters around a fireplace, media wall or wide opening
- In an entrance hall, the capital helps frame a doorway or define a transition between rooms
- Hotel lobbies, restaurants and reception areas can use it to establish a structured classical composition without adding the mass of plaster or stone
- In bedrooms, it can finish shallow pilasters beside a headboard wall or architectural niche
- For exterior projects, the 42 x 42 x 19 cm format suits villa entrances, covered porticos and facade pilasters around doors or windows
- The capital may be combined with a compatible pilaster body to create a continuous vertical feature, but dimensions and joint alignment should be checked before ordering
- Paint the installed product in a colour coordinated with the facade or interior scheme
- Exterior use requires UV-resistant paint, with exterior filler applied to joints and screw points
- Prepare the substrate by removing dust, loose particles, grease and moisture
- Confirm the 42 x 42 cm footprint, the 19 cm height and the position of adjoining pilaster elements before fixing
- Apply polyurethane (PU) mounting adhesive to the prepared contact areas and add screws with suitable anchors as mechanical support
- Silicone adhesive must not be used
- Use a 45-degree mitre cut where adjoining decorative sections require a clean corner
- Fill joints and screw recesses, then sand with 180-220 grit paper after the filler has set
- The factory primer prepares the surface for paint, while an additional primer is optional and should follow the paint manufacturer's system
- Finish with two coats of suitable water-based or synthetic paint
- Exterior installations require UV-resistant paint
- Clean the P5030D surface with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive cleaners, stiff brushes, solvents and chemicals that may damage the painted or primed finish
- Do not scrape the decorative surface with sharp tools
- For exterior applications, inspect the paint layer, joints and screw points periodically, especially after strong weather exposure
- If the coating shows damage, repair the affected area with compatible exterior filler and UV-resistant paint
- The polyurethane component has closed-cell construction and water absorption below 1%, but the long-term condition of the complete installation also depends on paint, joints, substrate and fixings
Can the P5030D pilaster capital be used outdoors?
Yes. The P5030D is suitable for exterior facade decoration as well as interior applications. Outdoor installation requires a UV-resistant paint because unpainted polyurethane may yellow under ultraviolet exposure. Exterior-grade filler should be applied to joints and screw points to protect the finished appearance. The product is decorative and not structural, so the pilaster, substrate and mechanical fastening must be designed to support the component's own weight and connection loads.
How is the pilaster column capital installed and painted?
Install the P5030D on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with screws and suitable anchors. Do not use silicone adhesive. Check alignment before fixing, use a 45-degree mitre where needed, then fill joints and screw recesses. Sand with 180-220 grit paper, apply additional primer if required by the selected paint system and finish with two coats of water-based or synthetic paint. Exterior work requires UV-resistant paint.
How heavy and durable is the P5030D capital?
An exact product weight is not provided because it depends on the finished piece and production details. The rigid polyurethane material has a density of 150-220 kg/m³, making it considerably lighter than plaster, concrete or solid timber while remaining firm for decorative use. It has closed-cell construction, water absorption below 1% and high dimensional stability. Service life depends on installation quality, paint protection, exposure and maintenance.
What advantages does polyurethane offer over plaster or timber?
Polyurethane is lighter and less vulnerable to breakage during handling than plaster. Compared with solid timber, it resists moisture-related decay and insect damage. The moulded material preserves architectural lines and can be filled, sanded and repainted when required. Its closed-cell structure limits water absorption to below 1%. Unlike structural stone or concrete, the P5030D is intended as a decorative finish and must not be treated as a load-bearing element.
Can the P5030D be painted in a custom colour?
Yes. The P5030D has a decorative, paint-ready surface supplied with factory primer. It can be finished with water-based or synthetic paint in the colour selected for the project. An additional primer is optional, but the choice should follow the paint manufacturer's recommendations because some manufacturers may not warrant paint applied without their specified primer. Polure does not guarantee compatibility with a particular paint product. Apply two coats after the joints and fixing points have been properly prepared.
Similar Products(Architectural Pilaster Columns)
P5030D is a polyurethane pilaster column capital designed to complete the upper section of a decorative pilaster with a clearly defined architectural profile. Measuring 42 x 42 x 19 cm in width, depth and height, the capital provides a proportionate finishing element for interior schemes and exterior facade compositions. It is a decorative component rather than a structural support, so the substrate and fixing system must be assessed according to the product's own weight and connection loads.
The P5030D pilaster capital is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. This construction combines low weight with a firm surface suitable for architectural detailing. The material has water absorption below 1%, high dimensional stability and resistance to rot and mould. Within the technical range of -100 °C / +80 °C, the product maintains its form without loss. Its B2 fire behaviour means it is difficult to ignite and tends to extinguish when the flame source is removed.
The P5030D capital presents a balanced, symmetrical architectural form intended to visually terminate a pilaster. Its decorative surface is supplied ready for painting, allowing the finish to be coordinated with wall, ceiling or facade colours. Water-based and synthetic paints can be used. The factory primer prepares the surface for painting; an additional primer remains optional and depends on the selected paint system. Paint manufacturers may not provide warranty coverage when their recommended primer is omitted, and Polure does not guarantee compatibility with the chosen paint.
In interiors, the P5030D can finish pilasters in entrance halls, living rooms, dining rooms, hotel lobbies, restaurants and reception areas. It can also frame a wall feature, doorway or fireplace surround when integrated with a matching pilaster body. Outdoors, the capital can be used on villa facades, covered entrances and commercial elevations. Exterior applications require UV-resistant paint, while joints and screw points should be sealed with exterior-grade filler. The 42 x 42 cm footprint suits medium-scale pilaster compositions without overwhelming a standard room or facade bay.
For installation, begin with a clean, dry, sound and dust-free surface. Check the dimensions and alignment before fixing, then use polyurethane (PU) mounting adhesive together with mechanical fastening. Silicone adhesive must not be used. Cut adjoining pieces with a 45-degree mitre where required, secure the capital with screws and suitable anchors, and fill the joints and fixing points. After curing according to the selected system, sand with 180-220 grit paper, apply primer where required and finish with two coats of paint.
Compared with plaster, the P5030D is easier to handle and less prone to breaking during installation. Unlike solid timber, polyurethane is resistant to moisture-related decay and insect damage, while its moulded surface preserves fine architectural definition. The result is a repairable, paintable decorative capital that can be refreshed as the surrounding design changes.
- The P5030D pilaster column capital is intended for the upper termination of decorative pilasters in both interior and exterior architecture
- In a living room, it can complete pilasters around a fireplace, media wall or wide opening
- In an entrance hall, the capital helps frame a doorway or define a transition between rooms
- Hotel lobbies, restaurants and reception areas can use it to establish a structured classical composition without adding the mass of plaster or stone
- In bedrooms, it can finish shallow pilasters beside a headboard wall or architectural niche
- For exterior projects, the 42 x 42 x 19 cm format suits villa entrances, covered porticos and facade pilasters around doors or windows
- The capital may be combined with a compatible pilaster body to create a continuous vertical feature, but dimensions and joint alignment should be checked before ordering
- Paint the installed product in a colour coordinated with the facade or interior scheme
- Exterior use requires UV-resistant paint, with exterior filler applied to joints and screw points
- Prepare the substrate by removing dust, loose particles, grease and moisture
- Confirm the 42 x 42 cm footprint, the 19 cm height and the position of adjoining pilaster elements before fixing
- Apply polyurethane (PU) mounting adhesive to the prepared contact areas and add screws with suitable anchors as mechanical support
- Silicone adhesive must not be used
- Use a 45-degree mitre cut where adjoining decorative sections require a clean corner
- Fill joints and screw recesses, then sand with 180-220 grit paper after the filler has set
- The factory primer prepares the surface for paint, while an additional primer is optional and should follow the paint manufacturer's system
- Finish with two coats of suitable water-based or synthetic paint
- Exterior installations require UV-resistant paint
- Clean the P5030D surface with a soft, dry cloth or a lightly damp cloth
- Avoid abrasive cleaners, stiff brushes, solvents and chemicals that may damage the painted or primed finish
- Do not scrape the decorative surface with sharp tools
- For exterior applications, inspect the paint layer, joints and screw points periodically, especially after strong weather exposure
- If the coating shows damage, repair the affected area with compatible exterior filler and UV-resistant paint
- The polyurethane component has closed-cell construction and water absorption below 1%, but the long-term condition of the complete installation also depends on paint, joints, substrate and fixings
Can the P5030D pilaster capital be used outdoors?
Yes. The P5030D is suitable for exterior facade decoration as well as interior applications. Outdoor installation requires a UV-resistant paint because unpainted polyurethane may yellow under ultraviolet exposure. Exterior-grade filler should be applied to joints and screw points to protect the finished appearance. The product is decorative and not structural, so the pilaster, substrate and mechanical fastening must be designed to support the component's own weight and connection loads.
How is the pilaster column capital installed and painted?
Install the P5030D on a clean, dry and sound surface using polyurethane (PU) mounting adhesive together with screws and suitable anchors. Do not use silicone adhesive. Check alignment before fixing, use a 45-degree mitre where needed, then fill joints and screw recesses. Sand with 180-220 grit paper, apply additional primer if required by the selected paint system and finish with two coats of water-based or synthetic paint. Exterior work requires UV-resistant paint.
How heavy and durable is the P5030D capital?
An exact product weight is not provided because it depends on the finished piece and production details. The rigid polyurethane material has a density of 150-220 kg/m³, making it considerably lighter than plaster, concrete or solid timber while remaining firm for decorative use. It has closed-cell construction, water absorption below 1% and high dimensional stability. Service life depends on installation quality, paint protection, exposure and maintenance.
What advantages does polyurethane offer over plaster or timber?
Polyurethane is lighter and less vulnerable to breakage during handling than plaster. Compared with solid timber, it resists moisture-related decay and insect damage. The moulded material preserves architectural lines and can be filled, sanded and repainted when required. Its closed-cell structure limits water absorption to below 1%. Unlike structural stone or concrete, the P5030D is intended as a decorative finish and must not be treated as a load-bearing element.
Can the P5030D be painted in a custom colour?
Yes. The P5030D has a decorative, paint-ready surface supplied with factory primer. It can be finished with water-based or synthetic paint in the colour selected for the project. An additional primer is optional, but the choice should follow the paint manufacturer's recommendations because some manufacturers may not warrant paint applied without their specified primer. Polure does not guarantee compatibility with a particular paint product. Apply two coats after the joints and fixing points have been properly prepared.