34x69x32 cm Polyurethane Pilaster Column Capital Detail
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Pürüzsüz, detaylı kabartma hatlarına sahip boyanabilir yüzey |
| Color | Astarlı beyaz (uygulama sonrası istenilen renkte boyanabilir) |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 34 cm |
| Dimensions | 343 × 686 × 315 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
A pilaster column capital is a decorative upper element that completes a pilaster or column composition with a defined architectural transition between the shaft and the surrounding surface. P5050D50 combines a compact footprint with pronounced relief lines, making it suitable for projects that require a classical profile without the mass of a mineral-based component.
Made from rigid, closed-cell polyurethane, the capital has a density of 150-220 kg/m3 and measures 34 x 69 x 32 cm. Its low water absorption, below 1%, supports use in interior and exterior decorative applications when the correct coating system is selected. Dimensional stability has been tested at -20 °C / +70 °C; this test range describes dimensional behaviour and is not a service-temperature rating. The piece arrives with a factory primer and can be finished with water-based or synthetic paint.
The surface combines a smooth base with clearly defined raised detailing, allowing light and shadow to articulate the transition around a pilaster. The relief remains visible after painting and can be coordinated with the column shaft, facade colour scheme or interior trim. A supplementary primer may be chosen where required by the paint manufacturer, since paint-system warranties can depend on using that manufacturer's primer. Polure does not provide a warranty for paints applied to the product.
Use P5050D50 above pilasters at entrance portals, villa facades, covered terraces and formal window compositions. Indoors, it can frame pilasters in a hallway, living room, hotel lobby, restaurant or office reception area. Pairing two capitals with matching vertical pilaster elements creates a balanced surround for a doorway or feature wall. On an exterior facade, the component works as a decorative finish rather than a structural support and must be protected with UV-resistant exterior paint.
For installation, prepare a clean, dry and sound substrate, then position the capital accurately on the pilaster shaft. Apply polyurethane (PU) mounting adhesive and secure the element with screws as mandatory mechanical fixing; use suitable plugs where the substrate requires them. Fill joints and fixing points with exterior-grade filler for outdoor work, sand with 180-220 grit abrasive, apply primer if selected for the paint system, and finish with two coats of paint. Silicone adhesive is not suitable for this installation.
Compared with plaster, the rigid PU component is lighter and less prone to breakage during handling. Unlike untreated wood, it does not rot and offers better resistance to moisture; compared with EPS, its harder surface supports sharper decorative definition and practical filling, sanding and repainting. With appropriate installation and periodic coating maintenance, P5050D50 provides a repairable decorative finish for both refined interiors and protected facade details.
- P5050D50 is designed for the upper termination of pilasters and decorative column compositions
- On a villa facade, place it above vertical pilasters at an entrance portal or around a formal doorway to create a clear architectural transition
- It can also finish pilasters used beside windows, on covered terraces or beneath a projecting facade detail
- The 34 x 69 x 32 cm format gives the piece a noticeable presence while remaining suitable for controlled, medium-scale compositions
- Indoors, use it in a living room, entrance hall, hotel lobby, restaurant or office reception area
- A pair can frame a doorway, mirror or feature wall, while several aligned pilasters can establish rhythm along a corridor
- Paint the factory-primed surface in a colour matching the shaft, or use a contrasting tone to make the relief more visible
- For exterior applications, apply a UV-resistant paint system and seal joints and fixing points with suitable exterior filler
- The capital is decorative and must not be treated as a structural load-bearing component
- Ensure that the pilaster shaft and substrate are clean, dry, stable and free from dust, grease and loose material
- Check the position of P5050D50 before applying adhesive, especially when aligning paired capitals around a doorway or facade opening
- Bond the piece with polyurethane (PU) mounting adhesive, then add screws as mandatory mechanical fixing
- Select suitable plugs according to the substrate; wide or exposed applications may require additional mechanical support
- Do not use silicone adhesive
- Fill visible joints and screw points, using exterior-grade filler for outdoor installations
- After the filler has cured, sand the surface with 180-220 grit abrasive
- Apply an additional primer only when required or preferred by the selected paint manufacturer, then apply two coats of water-based or synthetic paint
- Remove dust with a soft dry cloth or a lightly damp cloth
- Avoid abrasive pads, aggressive solvents and harsh chemical cleaners, as they may mark the primed or painted surface
- For exterior installations, inspect the paint film, joints and screw points periodically, particularly after severe weather
- Renew local filler or coating where necessary before moisture can reach the joints
- Use a UV-resistant exterior paint system outdoors; unpainted PU may yellow when exposed to sunlight
- Paint selection, primer compatibility and coating maintenance remain the responsibility of the project owner and applicator
Can P5050D50 be used on an exterior facade?
Yes. P5050D50 is suitable for exterior decorative pilaster and column compositions when installed on a sound substrate and finished with UV-resistant exterior paint. Seal joints and screw points with appropriate exterior filler. The component is decorative, not structural, so it must not be used to carry building loads. Exterior coating condition should be inspected periodically and renewed locally if cracking, peeling or joint damage appears.
How is the pilaster column capital installed and painted?
Prepare a clean, dry surface and test the position before bonding. Use polyurethane (PU) mounting adhesive together with mandatory screw fixing; choose plugs suitable for the substrate. Fill joints and fixing points, then sand with 180-220 grit abrasive. The factory-primed surface accepts water-based or synthetic paint. Apply an additional primer only if required or preferred by the selected paint manufacturer, followed by two paint coats. Silicone adhesive should not be used.
How durable and heavy is this decorative capital?
The rigid, closed-cell material has a density of 150-220 kg/m3 and is considerably lighter than comparable plaster or solid mineral elements. Its dimensional stability has been tested at -20 °C / +70 °C, while water absorption is below 1%. These figures describe material performance and dimensional testing, not a service-temperature rating or a guaranteed product lifespan. Correct fixing, paint selection and periodic maintenance are essential for long-term performance.
What advantages does it offer over plaster or wood?
The rigid PU capital is easier to handle than plaster and is less vulnerable to breakage during transport and installation. Its closed-cell construction offers low water absorption, while the material is not subject to rot like untreated wood. Compared with EPS, it provides a harder surface and supports more defined relief detailing. It can also be filled, sanded, repainted and repaired when required. It remains a decorative element and does not replace a structural column.
Can the factory-primed surface be painted in a custom colour?
Yes. The capital is supplied in primed white and can be painted in the project colour with a compatible water-based or synthetic paint. The primer prepares the surface for painting, but an additional primer remains optional and may be recommended by the paint manufacturer. Some paint manufacturers do not provide warranty coverage for surfaces painted without their own primer system. Outdoors, use a UV-resistant coating to reduce yellowing and preserve the finish.
Similar Products(Architectural Pilaster Columns)
A pilaster column capital is a decorative upper element that completes a pilaster or column composition with a defined architectural transition between the shaft and the surrounding surface. P5050D50 combines a compact footprint with pronounced relief lines, making it suitable for projects that require a classical profile without the mass of a mineral-based component.
Made from rigid, closed-cell polyurethane, the capital has a density of 150-220 kg/m3 and measures 34 x 69 x 32 cm. Its low water absorption, below 1%, supports use in interior and exterior decorative applications when the correct coating system is selected. Dimensional stability has been tested at -20 °C / +70 °C; this test range describes dimensional behaviour and is not a service-temperature rating. The piece arrives with a factory primer and can be finished with water-based or synthetic paint.
The surface combines a smooth base with clearly defined raised detailing, allowing light and shadow to articulate the transition around a pilaster. The relief remains visible after painting and can be coordinated with the column shaft, facade colour scheme or interior trim. A supplementary primer may be chosen where required by the paint manufacturer, since paint-system warranties can depend on using that manufacturer's primer. Polure does not provide a warranty for paints applied to the product.
Use P5050D50 above pilasters at entrance portals, villa facades, covered terraces and formal window compositions. Indoors, it can frame pilasters in a hallway, living room, hotel lobby, restaurant or office reception area. Pairing two capitals with matching vertical pilaster elements creates a balanced surround for a doorway or feature wall. On an exterior facade, the component works as a decorative finish rather than a structural support and must be protected with UV-resistant exterior paint.
For installation, prepare a clean, dry and sound substrate, then position the capital accurately on the pilaster shaft. Apply polyurethane (PU) mounting adhesive and secure the element with screws as mandatory mechanical fixing; use suitable plugs where the substrate requires them. Fill joints and fixing points with exterior-grade filler for outdoor work, sand with 180-220 grit abrasive, apply primer if selected for the paint system, and finish with two coats of paint. Silicone adhesive is not suitable for this installation.
Compared with plaster, the rigid PU component is lighter and less prone to breakage during handling. Unlike untreated wood, it does not rot and offers better resistance to moisture; compared with EPS, its harder surface supports sharper decorative definition and practical filling, sanding and repainting. With appropriate installation and periodic coating maintenance, P5050D50 provides a repairable decorative finish for both refined interiors and protected facade details.
- P5050D50 is designed for the upper termination of pilasters and decorative column compositions
- On a villa facade, place it above vertical pilasters at an entrance portal or around a formal doorway to create a clear architectural transition
- It can also finish pilasters used beside windows, on covered terraces or beneath a projecting facade detail
- The 34 x 69 x 32 cm format gives the piece a noticeable presence while remaining suitable for controlled, medium-scale compositions
- Indoors, use it in a living room, entrance hall, hotel lobby, restaurant or office reception area
- A pair can frame a doorway, mirror or feature wall, while several aligned pilasters can establish rhythm along a corridor
- Paint the factory-primed surface in a colour matching the shaft, or use a contrasting tone to make the relief more visible
- For exterior applications, apply a UV-resistant paint system and seal joints and fixing points with suitable exterior filler
- The capital is decorative and must not be treated as a structural load-bearing component
- Ensure that the pilaster shaft and substrate are clean, dry, stable and free from dust, grease and loose material
- Check the position of P5050D50 before applying adhesive, especially when aligning paired capitals around a doorway or facade opening
- Bond the piece with polyurethane (PU) mounting adhesive, then add screws as mandatory mechanical fixing
- Select suitable plugs according to the substrate; wide or exposed applications may require additional mechanical support
- Do not use silicone adhesive
- Fill visible joints and screw points, using exterior-grade filler for outdoor installations
- After the filler has cured, sand the surface with 180-220 grit abrasive
- Apply an additional primer only when required or preferred by the selected paint manufacturer, then apply two coats of water-based or synthetic paint
- Remove dust with a soft dry cloth or a lightly damp cloth
- Avoid abrasive pads, aggressive solvents and harsh chemical cleaners, as they may mark the primed or painted surface
- For exterior installations, inspect the paint film, joints and screw points periodically, particularly after severe weather
- Renew local filler or coating where necessary before moisture can reach the joints
- Use a UV-resistant exterior paint system outdoors; unpainted PU may yellow when exposed to sunlight
- Paint selection, primer compatibility and coating maintenance remain the responsibility of the project owner and applicator
Can P5050D50 be used on an exterior facade?
Yes. P5050D50 is suitable for exterior decorative pilaster and column compositions when installed on a sound substrate and finished with UV-resistant exterior paint. Seal joints and screw points with appropriate exterior filler. The component is decorative, not structural, so it must not be used to carry building loads. Exterior coating condition should be inspected periodically and renewed locally if cracking, peeling or joint damage appears.
How is the pilaster column capital installed and painted?
Prepare a clean, dry surface and test the position before bonding. Use polyurethane (PU) mounting adhesive together with mandatory screw fixing; choose plugs suitable for the substrate. Fill joints and fixing points, then sand with 180-220 grit abrasive. The factory-primed surface accepts water-based or synthetic paint. Apply an additional primer only if required or preferred by the selected paint manufacturer, followed by two paint coats. Silicone adhesive should not be used.
How durable and heavy is this decorative capital?
The rigid, closed-cell material has a density of 150-220 kg/m3 and is considerably lighter than comparable plaster or solid mineral elements. Its dimensional stability has been tested at -20 °C / +70 °C, while water absorption is below 1%. These figures describe material performance and dimensional testing, not a service-temperature rating or a guaranteed product lifespan. Correct fixing, paint selection and periodic maintenance are essential for long-term performance.
What advantages does it offer over plaster or wood?
The rigid PU capital is easier to handle than plaster and is less vulnerable to breakage during transport and installation. Its closed-cell construction offers low water absorption, while the material is not subject to rot like untreated wood. Compared with EPS, it provides a harder surface and supports more defined relief detailing. It can also be filled, sanded, repainted and repaired when required. It remains a decorative element and does not replace a structural column.
Can the factory-primed surface be painted in a custom colour?
Yes. The capital is supplied in primed white and can be painted in the project colour with a compatible water-based or synthetic paint. The primer prepares the surface for painting, but an additional primer remains optional and may be recommended by the paint manufacturer. Some paint manufacturers do not provide warranty coverage for surfaces painted without their own primer system. Outdoors, use a UV-resistant coating to reduce yellowing and preserve the finish.