84x84x38 cm Polyurethane Decorative Material Pilaster Column
Technical Specifications
| Material | Polyurethane decorative material |
|---|---|
| Surface | Decorative, paintable surface |
| Color | Suitable for painting; final color is determined by the selected paint system |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 84 cm |
| Dimensions | 836 × 836 × 380 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Architectural Pilaster Columns)
Polyurethane decorative material P5060D is a pilaster column element designed to complete architectural column compositions on interior walls and exterior facades. With its 84 x 84 x 38 cm dimensions, the piece provides a substantial visual frame for entrances, pilaster layouts and other vertical architectural features without being a structural load-bearing component.
Made from rigid, closed-cell polyurethane (PU), the element combines low weight with a firm, detailed surface. Its density is 150-220 kg/m³, while water absorption remains below 1%. Dimensional stability has been tested at -20 °C / +70 °C; this test range describes dimensional behaviour and is not a service-temperature rating. The material resists moisture-related deterioration, rot and mould, making it suitable for carefully specified indoor and outdoor decorative applications.
The P5060D pilaster column is supplied with a factory primer that prepares the surface for a selected paint system. Water-based and synthetic paints can be used, allowing the finished colour to match the surrounding architecture. An additional primer coat is optional and remains the customer's choice. Paint manufacturers may not provide a warranty for surfaces painted without their own primer system, and Polure does not provide warranties for the paints selected or applied by the customer.
In an entrance hall, the pilaster can frame a doorway or define a transition between reception and circulation areas. In a living room, it can finish a wall-mounted column composition beside a fireplace or opening. On a villa facade, hotel entrance or restaurant frontage, painted pilasters can coordinate with window surrounds, capitals, bases and horizontal facade details. The product is decorative only and should be fixed to an existing structural surface rather than used to support a building load.
Installation starts with a clean, dry and sound substrate. Cut adjoining pieces with a 45-degree mitre where required, apply polyurethane (PU) mounting adhesive, and secure the element with screws as mandatory mechanical fixing. Wide or heavily connected sections may require suitable additional support according to the substrate and project conditions. Fill joints and screw points with exterior-grade filler for facade use, sand with 180-220 grit abrasive, apply the selected primer system and finish with two paint coats. Silicone adhesive must not be used.
Compared with plaster, rigid PU is easier to handle and less prone to breakage during installation; compared with solid wood, it offers better resistance to moisture, decay and insects. It also allows filling, sanding, repainting and local repair, supporting practical maintenance over the service life of the decorative scheme. The fire classification is B2 (DIN 4102-1), with phosphorus-based flame retardant.
- P5060D is intended for pilaster column compositions in both interior and exterior architecture
- In a living room, place it beside a fireplace, wide opening or feature wall to give the composition a vertical architectural frame
- In an entrance hall, it can mark a doorway or separate the reception zone from a corridor
- Hotel lobbies and restaurants can use painted pilasters to reinforce a formal wall rhythm around entrances, service openings or reception counters
- In an office, the element can define a meeting-room threshold without adding structural function
- Outdoors, it is suitable for villa entrances, porch surrounds and facade compositions when finished with UV-resistant exterior paint
- Pairing the pilaster with a compatible base, capital or horizontal facade band should be checked against the project design rather than assumed from the product dimensions
- Because the piece measures 84 x 84 x 38 cm, it suits applications requiring a clearly visible architectural scale rather than a narrow trim effect
- Prepare a clean, dry and stable substrate before positioning the P5060D pilaster column
- Check the layout, joint lines and contact points, then make 45-degree mitre cuts where adjoining sections require a neat corner connection
- Apply polyurethane (PU) mounting adhesive to the rear contact areas and press the element into position
- Mechanical fixing with screws is mandatory; select suitable screws and anchors for the substrate, and consider additional support for broad or heavily connected sections
- Do not use silicone adhesive
- Fill joints and screw recesses, then sand with 180-220 grit abrasive
- For exterior work, seal joints and fixing points with exterior-grade filler
- Apply the chosen primer system and finish with two compatible paint coats
- The factory primer prepares the surface for painting, while any additional primer remains optional and should follow the paint manufacturer's warranty requirements
- Clean the P5060D pilaster column with a soft, slightly damp cloth and avoid abrasive cleaners, scouring pads and hard tools that could mark the painted or primed surface
- Inspect joints, screw points and painted areas periodically, particularly on exterior facades exposed to rain, sunlight and temperature changes
- Outdoor applications require UV-resistant paint
- If the finish needs renewal, use a compatible preparation and repainting system; any extra primer should follow the selected paint manufacturer's instructions
- Repair small surface or joint defects with suitable filler before sanding and repainting
- Polure does not warrant the customer's chosen paint system
Can P5060D be used on an exterior facade?
Yes. P5060D is suitable for exterior decorative applications when it is fixed correctly to a sound substrate and finished with UV-resistant exterior paint. Exterior joints and screw points should be sealed with exterior-grade filler, and the paint system must be selected for facade exposure. The element is decorative and does not replace a structural column or carry building loads. Local substrate conditions, connection requirements and the complete facade design should be reviewed before installation.
How is the pilaster column installed and painted?
Use a clean, dry and stable surface, make 45-degree mitre cuts where required, apply polyurethane (PU) mounting adhesive and secure the element with screws as mandatory mechanical fixing. Fill the joints and screw points, sand with 180-220 grit abrasive, apply the selected primer system and finish with two compatible paint coats. Silicone adhesive must not be used. The factory primer prepares the surface for paint, while an additional primer is optional and should follow the paint manufacturer's warranty conditions.
How durable is the P5060D pilaster and what does it weigh?
The product is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³, water absorption below 1% and high dimensional stability. Its dimensions are 84 x 84 x 38 cm. A net product weight is not stated in the supplied specification, so the installation team should confirm the actual handling and connection loads for the project. Correct adhesive, mandatory screw fixing, suitable paint and periodic inspection support long-term decorative use.
What are the advantages over plaster or wood?
Rigid PU is lighter and less vulnerable to breakage during handling than plaster, while offering better resistance to moisture-related decay and insect damage than solid wood. Its surface can be filled, sanded, painted and locally repaired, which is useful when a decorative scheme requires colour changes or minor restoration. Like plaster and wood, it must still be installed according to the substrate and used only as a decorative element, not as a structural support.
Can the P5060D colour be customised?
Yes. The P5060D pilaster column arrives with a decorative, paint-ready factory-primed surface rather than a fixed final colour. Water-based and synthetic paints may be used when compatible with the substrate and application conditions. The final appearance depends on the selected paint system, preparation and application quality. An additional primer coat is optional, but paint manufacturers may limit their warranty when their own primer has not been used. Polure does not warrant the customer's selected paint.