Rubber Rivet Beam Band in Aged Copper Bronze Finish
Technical Specifications
| Material | Rubber |
|---|---|
| Surface | With Embossed Rivets and Antique Texture |
| Color | Antique Copper / Bronze |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Dimensions | 2 × 1040 × 40 mm |
| Sales Unit | piece |
Details
Support
Technical drawing: Download DWG (20 KB)
Frequently Used Together
Similar Products(Faux Wood Beams and Rafters)
PKB40B is a rubber beam band designed to cover and visually finish the junctions between decorative beams, rafters and log-effect elements. Its 2 mm thickness, 1040 mm length and 40 mm width create a slim wrapping profile for targeted joint detailing rather than full beam coverage. The format is practical for adding a defined transition around timber-look ceiling elements in residential and commercial interiors.
The band is made from water-resistant rubber and is suitable for indoor and outdoor applications. Its flexible construction helps it follow the surface around a beam connection, while the compact profile keeps the detail visually controlled. The 2x1040x40 mm format can be cut to the required length on site, allowing installers to adapt the band to individual junctions and project dimensions without changing the surrounding beam arrangement.
Each piece combines an aged copper and bronze colour effect with a raised rivet pattern. The repeated rivet relief gives the joint a deliberately engineered appearance, while the distressed surface introduces variation instead of a uniform metallic look. This combination works particularly well with dark timber finishes, reclaimed wood effects, industrial interiors and rustic architectural schemes where the connection detail should remain visible as part of the design.
PKB40B can be used at the meeting points of ceiling beams and rafters in living rooms, entrance halls, restaurants, hotel interiors and themed retail spaces. Outdoors, it can be applied to suitable decorative beam details on covered terraces, facade features or entrance canopies. In a villa or hospitality project, matching bands can be positioned consistently at repeated beam joints to create a coordinated rhythm. The aged copper and bronze finish can also be integrated with metal lighting, antique-style hardware and warm wood tones.
For installation, prepare a clean, dry and stable surface, measure the joint, and cut the band accurately. Apply a polyurethane (PU) mounting adhesive to the rear, wrap the band around the connection and press it into position. Use suitable mechanical fixing where the application requires additional retention. Close the meeting point neatly, remove excess adhesive before it cures, and check the rivet pattern alignment. If repainting is required, test the selected coating on a small area first and follow the paint manufacturer's instructions.
Compared with a plaster joint detail, this rubber band is easier to handle around a decorative beam and is less vulnerable to cracking from minor movement. Unlike untreated timber trim, it does not depend on a natural wood grain to create its finish and offers a water-resistant decorative surface. Clean the finished band gently to preserve the aged texture and raised rivets.
- PKB40B is intended for the visible junctions of decorative beams, rafters and log-effect ceiling elements
- In a living room, place it at repeated beam intersections to make the construction detail look deliberate rather than unfinished
- In an entrance hall or hotel lobby, the aged copper and bronze surface can coordinate with warm lighting, dark timber tones and industrial hardware
- Restaurants and retail interiors can use the raised rivet pattern to reinforce a rustic or workshop-inspired concept
- For a bedroom, apply it selectively at the ends or meeting points of a ceiling beam so the detail remains controlled
- The product is also suitable for covered terraces, entrance canopies and selected facade beam features when the surrounding construction is appropriate for outdoor use
- On a villa facade, consistent placement at matching joints creates a regular architectural rhythm
- Measure each connection separately, since the 1040 mm length should be planned around the actual joint layout rather than treated as a universal beam size
- Begin with a clean, dry and stable beam surface
- Measure the required wrap length and mark the cutting line on the rear of the band
- Cut carefully so the joint closes neatly and the raised rivet pattern remains visually aligned
- Apply a polyurethane (PU) mounting adhesive to the back in an even pattern, then position PKB40B around the beam or rafter connection
- Press the band firmly into place and hold it until the adhesive grips according to the adhesive manufacturer's instructions
- Where the substrate, position or project specification calls for extra retention, add suitable mechanical fixing without damaging the visible relief
- Remove excess adhesive promptly
- For exterior applications, seal and finish the meeting point according to the project detail
- If painting is planned, use a compatible coating and test a small hidden section first
- Remove dust with a soft brush or dry cloth, then clean the surface with a slightly damp cloth when needed
- Avoid abrasive pads, aggressive solvents and strong chemical cleaners, as they may affect the aged copper and bronze appearance or soften the surface finish
- Do not scrape across the raised rivets
- For outdoor installations, inspect the edges and fixing points periodically, especially after severe weather, and repair any visible gap with a suitable exterior finishing product
- Always test a cleaning agent on an inconspicuous area before treating the full band
Can PKB40B be used outdoors?
Yes. PKB40B is suitable for indoor and outdoor decorative applications, including covered terraces, entrance canopies and selected facade beam details. The band is water-resistant, but the complete installation still depends on a sound substrate, suitable adhesive, correct mechanical retention where required and properly finished edges. For exposed locations, choose coatings and joint-finishing products intended for exterior use. The aged copper and bronze surface is especially suitable where the design calls for a visible connection detail between decorative beams or rafters.
How is the beam band installed and can it be painted?
Cut the 2x1040x40 mm band to the required joint length, apply a polyurethane (PU) mounting adhesive to the rear and wrap it around the beam connection. Add suitable mechanical fixing when the substrate or project detail requires it. Keep the cut and meeting point neat, and remove excess adhesive promptly. The product can be painted, but compatibility should be checked with the paint manufacturer. A small hidden-area test is recommended before applying the selected coating to the full surface.
What does the 2x1040x40 mm size mean?
The listed format is 2 mm thick, 1040 mm long and 40 mm wide. This makes PKB40B a narrow joint-detail band rather than a broad beam cladding profile. The 1040 mm length can be trimmed to suit the actual connection, while the 40 mm width creates a defined border around the meeting point. Measure each beam or rafter junction individually before cutting, particularly when several bands must align across one ceiling or facade.
What advantage does it have over plaster or timber joint details?
PKB40B provides a ready-textured rivet effect in a compact, easy-to-handle band. Compared with a plaster detail, it is less dependent on wet finishing work and is better suited to wrapping a decorative beam junction. Compared with untreated timber, it offers a consistent aged copper and bronze appearance without relying on natural grain variation. Its flexible rubber construction also helps it follow the connection detail more readily than a rigid plaster piece.
Where does the aged copper and bronze rivet design work best?
The raised rivet relief and distressed metallic colour work well at visible beam intersections where the joint should become part of the decoration. Use it with dark wood-look beams in rustic living rooms, restaurant ceilings, hotel lobbies, entrance halls and industrial-style interiors. Outdoors, it can accent suitable decorative beams at a covered entrance or terrace. Repeating the band at matching joints creates a measured rhythm, while using it only at selected connections produces a more restrained architectural detail.
- All products are sold on a factory delivery basis (Ex Works – EXW). The price covers the product price only; transport, shipping and installation are not included in the price and are the buyer’s responsibility.
- The delivery time varies depending on the product group, quantity and production schedule; the estimated time is notified in writing in the quotation and order confirmation.